Sage Journals: Discover world-class research

Abstract

PVC/nano CaCO₃ composites were prepared on Brabender Plasticorder. For comparison purposes, commercial CaCO₃ composites were also prepared. Characterization of the nano CaCO₃ and nanocomposites were done using scanning electron microscope (SEM) and transmission electron microscope (TEM). Their mechanical and thermal properties were also studied. Exfoliation was observed with the addition of different sizes of nano CaCO₃ filled in PVC composites. Best properties were observed with 9 nm CaCO₃ PVC composites. Tensile strength and modulus improved significantly even though the amount of addition of nano filler is low. Thermal properties of PVC/nanocomposites were found to be better compared to that of commercial filled CaCO₃ in PVC composites.

Keywords

PVC nano CaCO3 SEM TEM mechanical properties thermal properties.

Get full access to this article

View all access options for this article.

References

Mensker, K.C. and Fedoseeva, G.T.t. ( 1979). The Degradation and Stabilization of PVC, Chemistry Press, USSR.

Vogl, O. and Berry, G.C. ( 2002). Structural and Mechanistic Aspects of the Thermal Degradation of Poly(vinyl chloride), Prog. Polym. Sci., 27: 2133-2170.

Fu, X. and Qutubuddin, S. ( 2001). Polymer-Clay Nanocomposites: Exfoliation of Organophilic Montmorillonite Nanolayers in Polystyrene, Polymer, 42(2): 807-813.

Zhang, W. , Chen, D. , Zhao, Q. and Fang, Y. ( 2003). Different Vinyl Acetate Content on the Morphology and Properties of EVA/Clay Nanocomposites, Polymer, 44: 7953-7961.

Usuki, A. and Okada, A. ( 1995). The Chemistry of Polymer-Clay Hybrid, Mater. Sci. Engg., C3: 109-115.

Giannelis, E. ( 1998). NIST Grant Quarterly Report.

Mishra, S. and Shimpi, N.G. ( 2005). Effect of Nano CaCO3 and its Comparison with Flyash Filled Styrene Butadiene Rubber (SBR) on Mechanical and Thermal Properties, J. Sci. Ind. Res., 41: 744-752.

Mishra, S. and Shimpi, N.G. ( 2005). Mechanical and Flame Retarding Properties of SBR Rubber Filled with Nano CaCO3 as Filler and Linseed Oil as Extender, J. Appl. Polym. Sci., 98: 2563.

Chen, G.M. , Liu, S.H. , Chen, S.J. and Qi, Z.N. ( 2001). FTIR Spectra, Thermal Properties, and Dispersibility of a Polystyrene/Montmorillonite Nanocomposites, Macromol. Chem. Phys., 202: 1189.

10.

Blumstein, A. (1965). Polymerization of Absorbed Monolayers P. Thermal degradation of the Inserted Polymer, J. Polym. Sci. Part A: General Papers, 3: 2665.

11.

Zhu, J. , Start, P. , Mauritz, K.A. and Wilkie, C.A. (2002). Thermal Stability and Flame Retardancy of Poly(methyl methacrylate) Clay Nanocomposites, Polym. Degrad. Stab., 77: 253.

12.

Zanetti, M. , Camino, G. , Peichert, P. and Mulhaupt, R. (2001). Thermal Behavior of Poly(propylene) Layered Silicate Nanocomposites, Macromol. Rapid Commun., 22: 176.

Dispersion of Nano CaCO3 on PVC and its Influence on Mechanical and Thermal Properties

Abstract

Keywords

Get full access to this article

References