Evolution of the Impact Strength of Carbon Fiber-reinforced PEI Following Exposure to Mechanical,Hygrothermal and Hygrothermomechanical Aging

Abstract

The instrumented impact test in a falling weight tower was used to obtain the influence of hygrothermal exposure (temperature and humidity), mechanical exposure (flexure load) and the addition of both types of aging (hygrothermomechanical) on the impact properties of a composite with a thermoplastic matrix reinforced with carbon fiber fabric. During the tests, the Charpy specimens employed were positioned so that the hammer struck the piled up plies of the composites transversely. This condition contributed to delamination along the planes of the interface. The energy obtained has two components: initiation and propagation. These components must be calculated independently and could be used to evaluate the behavior of the material subjected to these types of exposure. An analysis was carried out of the specific advantages of this test method in composite materials. From the results, it can be deduced that the fracture toughness of the material does not suffer substantial variations if the exposures are independent. However, their combined action does modify the behavior of the material; in which case, a significant decrease in toughness can be observed.

Keywords

impact aging delamination carbon fiber PEI.

Get full access to this article

View all access options for this article.

References

Kalthoff, J.F. (2004). Characterization of the Dynamic Failure Behaviour of a Glass-fiber/Vinylester at Different Temperatures by Means of Instrumented Charpy Impact Testing, Composites Part B, 35(6—8): 657—663.

Delfosse, D. and Poursartip, A. (1997). Energy-based Approach to Impact Damage in CRFP Laminates, Composites Part A, 28A(7): 647—655.

Buck, S.E. , Lischer, D.W. and Nemat-Nasser, S. (1998). The Durability of E-glass/Vinyl Ester Composite Materials Subjected to Environmental Conditioning and Sustained Loading, Journal of Composite Materials, 32(9): 874—893.

Munson , and Mc-Gee, S.H. (1996). Effects of Hygrothermal Exposure on the Mechanical Properties of Injection Molded Glass-fiber Reinforced Poly (phenylene sulphide) , Polymer Composites, 17(3): 393—399.

Fernández-Canteli, A. , Argüelles, A. , Viña, J. , Ramulu, M. and Kobayashi, A.S. (2002). Dynamic Fracture Toughness Measurements in Composites by Instrumented Charpy Testing: Influence of Aging, Composites Science and Technology, 62(10—11): 1315—1325.

En Iso 14556 (2001). Steel, Charpy V-notch Pendulum Impact Test, Instrumented Test Method.

Morioka, K. and Tomita, Y. (2005). Effect of Lay-up Sequences on Mechanical Properties and Fracture Behavior of CFRP Laminate Composites, Journal of Thermoplastic Composite Materials, 18(5): 407—416.

Ji-Zhao, L. (2005). Mechanical Properties of Hollow Glass Bead-filled ABS Composites, Journal of Thermoplastic Composite Materials , 18(5): 407—416.

Dai Gil , L. and Seong Sik , Ch. (2001). Impact Characteristics of Glass Fiber Composites with Respect to Fiber Volume Fraction, Journal of Composite Materials, 35(1): 27—56.

10.

Bledzki, A.K. and Faruk, O. (2004). Creep and Impact Properties of Wood Fibre— Polypropylene Composites: Influence of Temperature and Moisture Content, Composites Science and Technology, 64(5): 693—700.

11.

Ganster, J. , Fink, H.P. and Pinnow, M. (2006). High-tenacity Man-made Cellulose Fibre Reinforced Thermoplastics Injection Moulding Compounds with Polypropylene and Alternative Matrices, Composites Part A , 37(10): 1796—1804.

12.

EN Iso 179-2 (2000). Plastics, Determination of Charpy Impact Properties, Part 2: Instrumented Impact Test.

13.

Suzuki, S. , Saimi, Y. and Ono, T. (2006). Evaluation of a New Fiber-reinforced Resin Composite , Journal of Biomedical Materials Research Part B: Applied Biomaterials, 76B(1): 184—189.