Fabrication and characterization of melt-blended polylactide-chitin composites and their foams

Abstract

This study details the fabrication and foaming of melt-blended polylactide (PLA) and chitin composites. The chitin used for compounding was as-received, as chitin nanowhiskers and as chitin nanowhiskers with a compatibilizing agent. The chitin nanowhiskers were produced by an acid-hydrolysis technique and their morphology was examined with transmission electron microscopy. The composite morphology was characterized with scanning electron microscopy and was related to the observed thermal, rheological, and mechanical behaviors of the composites. Chitin was found to decrease the thermal stability of the composites. Addition of chitin was also found to reduce the viscosity of the composites, which is believed to be because of the hydrolysis of PLA during melt blending of chitin in suspension. The stiffness of the composites was found to increase with increasing chitin content while the strength was found to decrease. Porous PLA—chitin composites were produced by a two-step batch-foaming technique, and the expansion behavior was correlated with the visco-elastic observations. The statistical significance of chitin type and composition dependence on the mechanical properties and foam morphologies were evaluated.

Keywords

polylactide chitin composite nanowhisker melt blending

Get full access to this article

View all access options for this article.

References

Lee ST , Kareko L. and Jun J. Study of thermoplastic PLA foam extrusion. J Cell Plast 2008; 44: 293-305.

Nangeroni J. and Randall J. Extruded foams made with polylactides that have high molecular weights and high intrinsic viscosities. WO/2009/134688, 2009.

Di Y. , Iannace S. , Di Maio E. and Nicolais L. Reactively modified poly (lactic acid): properties and foam processing . Macromol Mater Eng 2005; 290: 1083-1090.

Ray SS and Okamoto M. New polylactide/layered silicate nanocomposites, 6a melt rheology and foam processing. Macromol Mater Eng 2003 ; 288: 936-944.

Yu L. , Dean K. and Li L. Polymer blends and composites from renewable resources. Prog Polym Sci (Oxford) 2006; 31(6): 576-602.

Oksman K. , Mathew AP , Bondeson D. and Kvien I. Manufacturing process of cellulose whiskers/polylactic acid nanocomposites . Compos Sci Technol 2006; 66: 2776-2784.

Huneault MA and Li H. Morphology and properties of compatibilized polylactide/ thermoplastic starch blends. Polymer 2007; 48: 270-280.

Huda MS , Drzal LT , Misra M. and Mohanty AK Wood-fiber-reinforced poly(lactic acid) composites: evaluation of the physicomechanical and morphological properties. J Appl Polym Sci 2006; 102: 4856-4869.

Cho Y. , Cho Y. , Chung S. , Yoo G. and Ko S. Water-soluble chitin as a wound healing accelerator. Biomaterials 1999; 20: 2139-2145.

10.

Nishino T. , Matsui R. and Nakamae K. Elastic modulus of the crystalline regions of chitin and chitosan . J Polym Sci Part B 1999; 37: 1191-1196.

11.

Mi F. , Shyu S. , Lin Y. , Wu Y. , Peng C. and Tsai Y. Chitin/PLGA blend microspheres as a biodegradable drug delivery system: a new delivery system for protein. Biomaterials 2003; 24: 5023-5036.

12.

Araujo ABA , Lemos AF and Ferreira JMFf. Rheological, microstructural, and in vitro characterization of hybrid chitosan-polylactic acid/hydroxyapatite composites . J Biomed Mater Res - Part A 2009; 88: 916-922.

13.

Wan Y. , Wu Q. , Wang S. , Zhang S. and Hu Z. Mechanical properties of porous polylactide/chitosan blend membranes . Macromol Mater Eng 2007; 292: 598-607.

14.

Gopalan Nair K. and Dufresne A. Crab shell chitin whisker reinforced natural rubber nanocomposites. 1. Processing and swelling behavior. Biomacromolecules 2003; 4: 657-665.

15.

Gopalan Nair K. and Dufresne A. Crab shell chitin whisker reinforced natural rubber nanocomposites. 2. Mechanical behavior. Biomacromolecules 2003; 4: 666-674.

16.

Nair KG , Dufresne A. , Gandini A. and Belgacem MN Crab shell chitin whiskers reinforced natural rubber nanocomposites. 3. Effect of chemical modification of chitin whiskers. Biomacromolecules 2003; 4: 1835-1842.

17.

Morin A. and Dufresne A. Nanocomposites of chitin whiskers from Riftia tubes and poly(caprolactone) . Macromolecules 2002; 35: 2190-2199.

18.

Sriupayo J. , Supaphol P. , Blackwell J. and Rujiravanit R. Preparation and characterization of α-chitin whisker-reinforced poly(vinyl alcohol) nanocomposite films with or without heat treatment. Polymer 2005 ; 46: 5637-5644.

19.

Dubois P. and Narayan R. Biodegradable compositions by reactive processing of aliphatic polyester/polysaccharide blends. Macromol Sympos 2003; 198: 233-243.

20.

Richards E. , Rizvi R. , Chow A. and Naguib H. Biodegradable composite foams of PLA and PHBV using subcritical CO2. J Polym Environ 2008 ; 16: 258-266.

21.

Di Y. , Iannace S. , Di Maio E. and Nicolais L. Poly(lactic acid)/organoclay nanocomposites: thermal, rheological properties and foam processing. J Polym Sci Part B 2005 ; 43: 689-698.

22.

Habibi Y. , Goffin A. , Schiltz N. , Duquesne E. , Dubois P. and Dufresne A. Bionanocomposites based on poly(-caprolactone)-grafted cellulose nanocrystals by ring-opening polymerization. J Mater Chem 2008; 18: 5002-5010.

23.

Whitfield PS , Nawaby AV , Blak B. and Ross J. Modified design and use of a highpressure environmental stage for laboratory X-ray powder diffractometers. J Appl Crystallogr 2008 ; 41: 350-355.

24.

Hu X. , Nawaby AV , Naguib HE , Day M. , Ueda, K. and Lia X. Polylactic acid (PLA)CO2 foams at sub-critical conditions. Society of Plastics Engineers Annual Technical Conference 2005, ANTEC 2005, 1-5 May 2005, Society of Plastics Engineers, Boston, MA.

25.

Doroudiani S. , Park CB and Kortschot MT Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers. Polym Eng Sci 1996; 36: 2645-2662.