Sage Journals: Discover world-class research

Abstract

In this work, the preparation and characterization of symmetric and asymmetric structural foams is presented. Using low-density polyethylene and modified azodicarbonamide, a compression molding technique is presented to produce structural foams while controlling the skin thickness on both sides. The resulting foams were characterized in terms of foam density, skin thickness, and flexural modulus. It was found that foams having equal skin thickness on each side have the same apparent flexural modulus irrespective of the side the load is applied and the results are well predicted by the modified I-beam model of Hobbs. On the other hand, foams having unequal skin thickness have a higher apparent flexural modulus when the load is applied on the thicker side. This asymmetry in flexural modulus can be well described by a simple correlation using the skin thickness asymmetry ratio and the core void fraction.

Keywords

structural foams asymmetry skin thickness flexural modulus.

Get full access to this article

View all access options for this article.

References

Johnston, F.L. (1942). Synthetic Spongy Material, U.S. Patent 2,256,483.

Higgins, W.T. Cellular Polyethylene by Extrusion, Mod. Plast., 1954: 31(7): 99-104.

Forman, C. ( 2001). Polymeric Foams, BCC Research Reports & Reviews, PLS008F.

Klempner, D. and Frisch, K.C. ( 1991). Handbook of Polymeric Foam and Foam Technology, Munich, Hanser.

Gibson, L.J. and Ashby, M.F. ( 1997). Cellular Solids: Structure and Properties, Cambridge, Cambridge University Press.

Kaw, A.K. ( 2006). Mechanics of Composite Materials, 2nd edn, USA, Taylor & Francis, p. 444.

Tovar-Cisneros, C. , Gonzalez-Núñez, R. and Rodrigue, D. (2007). The Effect of Mold Temperature on Morphology and Mechanical Properties of Injection Molded HDPE Structural Foams, pp. 2120-2124, SPE ANTEC Technical Papers.

Rodrigue, D. , Leduc, S. , Tovar-Cisneros, C. and Gonzalez-Nuñez, R. ( 2007). The Effect of Mould Temperature on Morphology of Injection Moulded HDPE Structural Foams, Proceedings of Blowing Agents and Foaming Processes Conference, Frankfurt, 22-23 May, Paper 11, p. 10.

Throne, J.L. ( 1996). Thermoplastic Foams, Hinckley, OH , Sherwood Publishers.

10.

Shutov, F.A. ( 1986). Integral/Structural Polymer Foams; Technology, Properties and Applications, Berlin, Springer Verlag.

11.

Trantina, G. and Nimmer, R. ( 1994). Structural Analysis of Thermoplastic Components, USA , McGraw-Hill Inc.

12.

Blanchet, J.F. and Rodrigue, D. The Effect of Skin Thickness on the Mechanical Properties of Structural Foam, Cell. Polym., 2004: 23(4): 193-210.

13.

Zhang, Y.L. , Rodrigue, D. and Ait-Kadi, A. High-density Polyethylene Foam. I. Polymer and Foam Characterization, J. Appl. Polym. Sci., 2003: 90(8): 2111-2119.

14.

Pramuk, P.F. Treatment of Structural Foam Testing Results , Polym. Eng. Sci., 1976: 16(8): 559-563.

15.

Moore, D.R. , Couzens, K.H. and Iremonger , M.J. The Deformational Behaviour of Foamed Thermoplastics, J. Cell. Plast., 1974: 10(3): 135-139.

16.

Hobbs, S.Y. Predicting the Flexural Rigidity of Thermoplastic Structural Foams, J. Cell. Plast., 1976: 12(5): 258-263.

17.

Zhang, Y.L. , Rodrigue, D. and Ait-Kadi, A. High Density Polyethylene Foam. IV. Flexural and Tensile Moduli of Structural Foam, J. Appl. Polym. Sci. , 2003: 90(8): 2139-2149.

18.

Halpin, J.C. and Tsai, S.W. ( 1969). US Force Materials Laboratory Report, AFML-TR-67-423.

19.

Wong, F.C. and Ait-Kadi, A. Mechanical Behavior of Particulate Composites: Experiments and Micromechanical Predictions, J. Appl. Polym. Sci., 1995: 55(2): 263-278.

20.

Throne, J.L. and Wasserstrass, J.D. Flexural and Cantilever Bending of Structural Foam Beams, J. Cell. Plast., 1976: 12(2): 98-102.

21.

Product Data Sheet of Polyethylene LA-0219A (2007). Nova Chemicals, Calgary, Alberta, Canada.

22.

Product Data Sheet of Celogen® 754-A Modified Azodicarbonamide (2007). Crompton Chemicals, USA.

23.

Kumar, V. and Weller, J.E. A Model for the Unfoamed Skin on Microcellular Foams, Polym. Eng. Sci., 1994: 34(3): 169-173.

24.

ASTM D1622 (1983). Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, Pennsylvania, USA.

25.

ASTM D790 (1988). Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, Pennsylvania, USA.

26.

Barzegari, R. and Rodrigue, D. The Effect of Density Profile on the Flexural Properties of Structural Foams, Polym. Eng. Sci., 2007: 47(9): 1459-1468.

27.

Kim, J. and Swanson, S.R. Effect of Unequal Face Thickness on Load Resistance of Sandwich Beams, J. Sand. Struc. Mater., 2004: 6(2): 145-166.

Flexural Modulus of Symmetric and Asymmetric Structural Foams

Abstract

Keywords

Get full access to this article

References