Review of the OSHA Framework for Oversight of Occupational Environments

Hullmans A. , “Measuring and Assessing the Development of Nanotechnology,” Scientometrics 70, no. 3 (2007): 739–758.

Lane N. Kalil T. , “The National Nanotechnology Initiative: Present at the Creation,” Issues in Science and Technology, Summer 2005, available at <http://www.issues.org/21.4/lane.html> (last visited September 22, 2009).

Roco M. C. , “Nanotechnology Initiative: Past, Present, Future,” in Goddard W. A. , eds., Handbook on Nanoscience, Engineering, Technology, 2nd ed. (Boca Raton, FL: Taylor & Francis, 2007): At 19–44.

Research Lux , “The Nanotech Report,” 5th ed. (New York: Lux Research Inc., 2007).

Project on Emerging Nanotechnologies, Woodrow Wilson Center, “Nanotechnology Now Used in Nearly 500 Everyday Products,” 2007, available at <http://www.wilsoncenter.org/index.cfm?fuseaction=topics.item&news_id=237776&topic_id=166192> (last visited September 22, 2009).

Roco M. C. Bainbridge W. S. , eds., Societal Implications of Nanoscience and Nanotechnology (New York: Springer, 2001).

See Research Lux , supra note 4.

Roco M. C. , “Broader Societal Issues of Nanotechnology,” Journal of Nanoparticle Research 5, nos. 3–4 (2003): 181–189.

See Research Lux , supra note 4.

Monica J. C. Jr. Heintz M. E. Lewis P. T. , “The Perils of Preemptive Regulation,” Nature Nanotechnology 2, no. 2 (2007): 68–70.

Choi J. Y. Ramachandran G. Kandlikar M. , “The Impact of Toxicity Testing Costs on Nanomaterial Regulation,” Environmental Science and Technology 43, no. 9 (2009): 3030–3034.

Personal communication from M. Berger to author (GR) (April 8, 2008).

Ashford N. A. Caldart C. C. , Technology, Law and the Working Environment (Washington, D.C.: Island Press, 1996); Ashford N. A. Caldart C. C. , Negotiated Regulation, Implementation and Compliance in the United States, Handbook of Environmental Voluntary Agreement, 5th ed. (New York: Springer, 2005).

Balbus J. M. Florini K. Denison R. A. , “Protecting Workers and the Environment: An Environmental NGO's Perspective on Nanotechnology,” Journal of Nanoparticle Research 9, no. 1 (2007): 11–22.

Kandlikar M. Ramachandran G. Maynard A. D. , “Health Risk Assessment for Nanoparticles: A Case for Using Expert Judgment,” Journal of Nanoparticle Research 9, no. 9 (2007): 137–156.

Wardak A. Gorman M. E. Swami N. , “Environmental Regulation of Nanotechnology and the TSCA,” IEEE Technology and Society Magazine 26, no. 2 (2007): 48–56.

Kuzma J. Paradise J. Ramachandran G. , “An Integrated Approach to Oversight Assessment for Emerging Technologies,” Risk Analysis 28, no. 5 (2008): 1179–1195.

Wolff S. K. Hawkins N. C. Kennedy S. M. , “Selecting Experimental Data for Use in Quantitative Risk Assessment: An Expert Judgment Approach,” Toxicology and Industrial Health 6, no. 2 (1990): 275–295.

Evans J. S. Gray G. M. Sielken R. L. , “Use of Probabilistic Expert Judgment in Distributional Analysis of Carcinogenic Potency,” Regulatory Toxicology and Pharmacology 20, no. 1, Pt. 1 (1994): 15–36; Siegel J. E. Graham J. D. Stoto M. A. , “Allocating Resources Among AIDS Research Strategies,” Policy Science 23, no. 1 (1990): 1–23.

Hawkins N. C. Evans J. S. , “Subjective Estimation of Toluene Exposures: A Calibration Study of Industrial Hygienists,” Applied Industrial Hygiene Journal 4, no. 3 (1989): 61–68.

See Kuzma , supra note 19.

Belton V. Stewart T. J. , Multiple Criteria Decision Analysis: An Integrated Approach (Boston: Kluwer Academic Publishers, 2002).

Linkov I. Satterstrom F.K. Kiker G. A. , “From Optimization to Adaptation: Shifting Paradigms in Environmental Management and Their Application to Remedial Decisions,” Integrated Environmental Assessment and Management 2, no. 1 (2006): 92–98; Linkov I. Satterstrom F. K. Tkachuk A. Seager T. P. Figueria J. R. Tervonen T. , “A Multi-Criteria Decision Analysis Approach for Prioritization of Performance Metrics,” in Linkov I. Kinker G. Wenning R. , eds., Environmental Security in Harbors and Coastal Areas (Dordrecht, Netherlands: Springer, 2007).

Sharma S. , Applied Multivariate Statistics (New York: Wiley, 1960).

Kaiser H. F. , “The Application of Electronic Computers to Factor Analysis,” Educational and Psychological Measurement 20, no. 1 (1960): 141–151.

See Ashford Caldart , supra note 15.

Perdue D. K. , “OSHA: Employer Liability for Employee Violations,” Duke Law Journal 2, no. 2 (1977): 614–630.

Gray W. B. Scholz J. T. , “Does Regulatory Enforcement Work? A Panel Analysis of OSHA Enforcement,” Law and Society Review 27, no. 1 (1993): 177–214.

Michaels D. Monforton C. , “Manufacturing Uncertainty: Contested Science and the Protection of the Public's Health and Environment,” American Journal of Public Health 95, no. S1 (2005): S39–S48

The list is as follows: Vinyl chloride (1974), dibromo-3-chloropropane (DBCP) (1977), asbestos (1971 & 1983), benezene (1977), commercial diving (1976), pesticides, 14 carcinogens (1973).

Hopkins J. , “Fatality Rates Increase for Hispanic Workers,” USA Today, March 13, 2003, cited in Friedman L. S. Forst L. , “The Impact Of OSHA Recordkeeping Regulation Changes on Occupational Injury and Illness Trends in The US: A Time-Series Analysis,” Occupational and Environmental Medicine 64, no. 7 (2007): 454–460.

Shapiro S. A. Rabinowitz R. , “Voluntary Regulatory Compliance in Theory and Practice: The Case of OSHA,” available at <http://ssrn.com/abstract=188688> (last visited September 21, 2009).

Seminario P. , “Is OSHA Working for Working People?” Testimony before the House Committee on Employment and Education, Subcommittee on Employment and Workforce Safety of the Committee on Health, Education, Labor, and Pensions, Subcommittee on Workforce Protection on OSHA's Standard Setting Process, Washington, D.C., April 26, 2007.

Seligman P. J. Sieber W. K. Pederson D.H. , “Compliance with OSHA Record-Keeping Requirements,” American Journal of Public Health 78, no. 9 (1988): 1218–1219.

See Shapiro Rabinowitz , supra note 36, at 33.

Bartel A. P. Thomas L. G. , “Direct and Indirect Effects of Regulation: A New Look at OSHA's Impact,” Journal of Law and Economics 28, no. 1 (1985): 1–25; Jones C. Gray W. , “Longitudinal Patterns of Compliance with Occupational Safety and Health Administration Health and Safety Regulations in the Manufacturing Sector,” Journal of Human Resources 26, no. 4 (1991a): 623–653; Jones C. Gray W. , “Are OSHA Health Inspections Effective? A Longitudinal Study in the Manufacturing Sector,” Review of Economics and Statistics 73 no. 3 (1991): 504–508.

Viscusi W. K. , “The Impact of Occupational Safety and Health Regulation 1973–1983,” Rand Journal of Economics 17, no. 4 (1986): 567–580.

Magat W. A. Viscusi W. K. , “Effectiveness of the EPA's Regulatory Enforcement: The Case of Industrial Effluent Standards,” Journal of Law and Economics 33, no. 2 (1990): 331–360.

Gray W. B. Deily M. E. , “Compliance and Enforcement: Air Pollution Regulation in the US Steel Industry,” Journal of Environmental Economics and Management 31, no. 1 (1996): 96–111.

Laplante B. Rilstone P. , “Environmental Inspections and Emissions of the Pulp and Paper Industry in Quebec,” Journal of Environmental Economics and Management 31, no. 1 (1996): 19–36.

Deily M. E. Gray W. B. , “Agency Structure and Firm Culture: OSHA, EPA, and the Steel Industry,” Journal of Law, Economics, and Organization 23, no. 3 (2007): 685–709.

U.S. Department of Labor, Occupational Safety and Health Administration, All About OSHA , 2006, at 5–6, available at <http://www.osha.gov/Publications/all_about_OSHA.pdf> (last visited April 24, 2009). Other ways of enforcement are as follows: “(1) encourages employers and employees to reduce workplace hazards and to implement new safety and health management systems or improve existing programs; (2) develops mandatory job safety and health standards and enforces them through worksite inspections, and, sometimes, by imposing citations, penalties, or both; (3) promotes safe and healthful work environments through cooperative programs including the Voluntary Protection Programs, OSHA Strategic Partnerships, and Alliances; (4) establishes responsibility and rights for employers and employees to achieve better safety and health conditions; (5) supports the development of innovative ways of dealing with workplace hazards; (6) establishes training programs to increase the competence of occupational safety and health personnel; (7) provides technical and compliance assistance, and training and education to help employers reduce worker accidents and injuries; (8) works in partnership with states that operate their own occupational safety and health programs; and (9) supports the consultation programs offered by all 50 states, the District of Columbia, Puerto Rico, the Virgin Islands, Guam and the Northern Mariana Islands.”47. Leigh J. P. Marcin J. P. Miller T. R. , “An Estimate of the US Government's Undercount of Nonfatal Occupational Injuries,” Journal of Occupational and Environmental Medicine 46, no. 1 (2004): 10–18.

McGarity T. O. , “Some Thoughts on ‘Deossifying’ the Rulemaking Process,” Duke Law Journal 41, no. 6 (1992): 1385–1462.

Glaberson W. , “Is OSHA Falling Down on the Job?” New York Times, August 2, 1987.

Furchtgott-Roth D. , “New Rules for OSHA,” New York Sun, July 18, 2008.

See Seminario , supra note 37.

Seminario M. , Testimony before the House Committee on Employment and Education, Subcommittee on Workforce Protection on OSHA's Standard Setting Process, Washington, D. C., June 14, 2001. A list of OSHA Health Standards issued and the year each standard was published is as follows: Asbestos, 1972/1986; 13 carcinogens, 1974; vinyl chloride, 1974; coke oven emissions, 1974; benzene , 1978/1987; 1,2-Dibromo-3- chloropropane (DBCP), 1978; arsenic, 1978; cotton dust, 1978; acrylonitrile, 1978; lead, 1978; ethylene oxide, 1984; formaldehyde, 1987; chemical exposure in laboratories, 1990; blood-borne pathogens, 1991; 4,4' methylendianiline, 1992; cadmium, 1992; 1,3 butadiene, 1996; methylene chrolide, 1997; hexavalent chromium (Cr(VI)), 2006

Chajet H. , “Examining the Use of Non-Consensus Standards in Workplace Health and Safety,” Hearing before the Subcommittee on Workforce Protections of the Committee on Education and the Workforce U.S. House of Representatives, Washington, D.C., April 27, 2006.

Morriss A. P. , “Examining the Use of Non-Consensus Standards in Workplace Health and Safety,” Hearing before the Subcommittee on Workforce Protections of the Committee on Education and the Workforce U.S. House of Representatives, Washington, D.C., April 27, 2006.

Macoubrie J. , Informed Public Perceptions of Nanotechnology and Trust in Government , Woodrow Wilson International Center for Scholars, available at <http://www.wilsoncenter.org/events/docs/macoubriereport1.pdf> (last visited September 22, 2009).

Occupational Safety and Health Administration, “Statement of Secretary of Labor Alex Heran on 1999 Workplace Injury and Illness Rates,” December 12, 2000, available at <http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=NEWS_RELEASES&p_id=1371> (last visited September 22, 2009).

U.S. Department of Labor, Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities, available at <http://www.bls.gov/iif/> (last visited September 22, 2009), cited in L. S. Friedman and Forst L. , “Occupational Injury Surveillance of Traumatic Injuries in Illinois, Using the Illinois Trauma Registry: 1995–2003,” Journal of Occupational and Environmental Medicine 49, no. 4 (2007): 401–410.

Friedman L. S. Forst L. , “The Impact of OSHA Record-keeping Regulation Changes on Occupational Injury and Illness Trends in the US: A Time-Series Analysis,” Occupational and Environmental Medicine 64, no. 7 (2007): 454–460.

Gray W. B. Mendeloff J. M. , “The Declining Effects of OSHA Inspections on Manufacturing Injuries, 1979–1998,” Industrial and Labor Relations Review 58, no. 4 (2005): 571–587.

Baggs J. Silverstein B. Foley M. , “Workplace Health and Safety Regulations: Impact of Enforcement and Consultation on Workers' Compensation Claims Rates in Washington State,” American Journal of Industrial Medicine 43, no. 5 (2003): 483–494.

Mendeloff J. , “An Analysis of OSHA Health Inspection Data,” in Preventing Illness and Injury in the Workplace prepared for the U.S. Office of Technology Assessment, U.S. Congress, Washington, D.C.: 1983.

See Bartel Thomas , supra note 40.

Viscusi W. K. , “The Impact of Occupational Safety and Health Regulation 1973–1983,” Rand Journal of Economics 17, no. 4 (1986): 567–580.

Smith R. S. , “The Impact of OSHA Inspections on Manufacturing Injury Rates,” Journal of Human Resources 17, no. 2 (1978): 145–170.

McCaffery D. P. , “An Assessment of OSHA's Recent Effects on Injury Rates,” Journal of Human Resources 18, no. 1 (1983): 131–146.

Ruser J. W. Smith R. S. , “Reestimating OSHA's Recent Effects on Injury Rates,” Journal of Human Resources 26, no. 2 (1991): 212–257.

Wilson M. P. Chia D. A. Ehlers B. C. , “Green Chemistry in California: A Framework for Leadership in Chemicals Policy and Innovation,” New Solutions 16, no. 4 (2006): 365–372; Michaels D. Seminario P. , “Is OSHA Working for Working People?” Testimony Before the House Committee on Employment and Education, Subcommittee on Employment and Workforce Safety of the Committee on Health, Education, Labor, and Pensions, Subcommittee on Workforce Protection on OSHA's Standard Setting Process, Washington, D.C., April 26, 2007.

Shapiro S. A. McGarity T. O. , “Reorienting OSHA: Regulatory Alternatives and Legislative Reform,” Yale Journal on Regulation 6, no. 1 (1989): 1–64.

The Center for Occupational and Environmental Health, University of California, Green Chemistry: Cornerstone to a Sustainable California, available at <http://coeh.berkeley.edu/docs/news/green_chem_brief.pdf> (last visited September 22, 2009).

See Choi , supra note 13.

Becker R. A. , “Report of an ISRTP Workshop: Progress and Barriers to Incorporating Alternative Toxicological Methods in the U.S.,” Regulatory Toxicology and Pharmacology 46, no. 1 (2006): 18–22.

See Choi , supra note 13.