Antenna couplingmicrowave plasma enables a highly oxidative treatment of the outmost surface of polypropylene (PP) nonwoven fabric within a short time period. Subsequently, grafting copolymerization with acrylic acid (AAc) makes the plasma-treated fabric durably hydrophilic and excellent in water absorbency. With high grafting density and strong water affinity, the pAAc-grafted support greatly becomes feasible as an intensive absorbent and as a support to promote heparin immobilization through amide bonds. For heparin immobilized in acidic condition, the carbonate groups of the molecule tend to dissolve and passive encapsulation of the molecule prevents its functional groups from bondingwith the carboxylic acid of pAAc. This effect leads to inhibit the immobilization process and consequently reduces the quantity as well as the bioactivity of the immobilized heparin. In alkaline processing environment, the oxidized uronic acid residues in heparin-related glycans are presumably cleaved and the removal of some oxidized residuals before immobilization process is likely to reduce the chain length of heparin. In the latter case, anticoagulant Factors X and XII, but not thrombin, are unaffected. Anti-coagulant activity test using activated partial thromboplastin time (aPTT) is more sensitive in assessingheparin-immobilized surfaces, since it corresponds to Factor X and initiates the inhibition of Factor XII and thrombin. Likewise, platelets adhesion on the surfaces decreases as the process shifted from acidic to alkaline condition, whereas the hydrophilic character of the grafted pAAc markedly contributes to extend physical insertion of platelets. The immobilized heparin has a great part of original bioactivity, depending on the pH of the processing environment and the immobilized quantity. Relative bioactivity based upon aPTT tests is partially held longer than 90 days for the sample prepared in the alkaline or neutral environment.
1. Korn, E.D. (1993). The Assay of Lipoprotein Lipase In Vivo and In Vitro, Methods Biochem. Anal., 7: 145–192.
2.
2. Sundheim, G. and Dengtsson, G. (1985). Lipolysis in Mike Induced by Coolingor by Heparin: Comparisons of Amount of Lipoprotein Lipase in the Cream Fraction and Degree of Lipolysis, J. Dairy Sci., 68: 589–593.
3.
3. Hoffbrand, A.V. and Pettit, J.E. (1994). Essential Haematology, pp. 350–365, Oxford Blackwell Sci. Pub., London, UK.
4.
4. Danishefsky, I. and Tzeng, F. (1974). Preparation of Heparin-Linked Agarose and its Interaction with Plasma, Thrombosis Research, 4: 237–246.
5.
5. Solomons, T.W.G. (1996). Organic Chemistry, pp. 1085–1086, John Wiley & Sons Inc., New York, USA.
6.
6. Damus, P.S., Hicks, M. and Rosenberg, R.D. (1973). Anticoagulant Action of Heparin, Nature, 246: 355–357.
7.
7. Doctor, V.M., Lewis, D., Coleman, M., Kemp, M.T., Marbley, E. and Sauls, V.(1991). Anticoagulant Properties of Semisynthetic Polysaccharide Sulfates, Thrombosis Research, 64: 413–425.
8.
8. Kim, Y.J., Kang, I.K., Huh, M.W. and Yoon, S.C. (2000). Surface Characterization and In Vitro Blood Compatibility of Poly(ethylene terephthalate) Immobilized with Insulin and/or Heparin Using Plasma Glow Discharge, Biomaterials, 17: 121–130.
9.
9. Harfenist, E.J. and Murray, R.K. (1994). Harper’s Biochemistry, Appleton and Lange, pp. 665–687, Prentice-Hall International Inc., New York, USA.
10.
10. Kwaan, H.C., Samama, M.M. and Kher, A.R. (1991). Clinical Thrombosis, pp. 473–495, CRC Press Inc., Boca Raton, FL, USA.
11.
11. Tyan, Y.C., Liao, J.D., Kauser, R., Wu, I.D. and Weng, C.C. (2001). Assessment and Characterization of Degradation Effect for the Varied Degree of Ultra-violet Radiation onto the Collagen-bonded Polypropylene Non-woven Fabric Surface, Biomaterials, 23(1): 65–76.
12.
12. Tyan, Y.C., Liao, J.D., Wu, Y.T. and Hsu, K.Y. (2000). Study of Immobilized Heparin in Varied pH Values onto Porous Non-woven Fabric Surface, Chin. J. Med. and Biolog. Eng., 20(2): 25–30.
13.
13. Nagaoka, S., Mori, Y., Takiuchi, H., Yokota, K., Tanzawa, H. and Nishiumi, S. (1984). Polymers as Biomaterials, pp. 361–374, Plenum Publishing, New York, USA.
14.
14. Brown, B.A. (1984). Hematology, Principles and Procedures, pp. 179–240, Lea and Fegiger, Philadelphia, USA.
15.
15. Ferruti, P., Casini, G., Tempesti, F., Barbucci, R., Mastacchi, R. and Sarret, M. (1984). Heparinizable Materials (III)*. Heparin Retention Power of a Poly(amino-amine) Either as Crosslinked Resin, or Surface-grafted on PVC, Biomaterials, 5: 234–236.
16.
16. Lin, S.C., Jacobs, H. and Kim, S.W. (1991). Heparin Immobilization Increased Through Chemical Amplification, J. Biomed. Mater. Res., 25: 791–795.
17.
17. Kin, S.W., Jacobs, H., Lin, J.Y., Nojiri, C. and Okano, T. (1987). Nonthrombogenic Bioactive Surfaces, Ann. N.Y. Acad. Sci., 516: 116–130.
18.
18. Park, K.D., Kim, W.G., Jacobs, H., Okano, T. and Kim, S.W. (1992). Blood Compatibility of SPUU-PEO-Heparin Grafted Copolymers, J. Biomed. Mater. Res., 26: 739–756.
19.
19. Nojiri, C., Park, K.D., Grainger, D., Jacobs, H., Okano, T. and Kim, S.W. (1990). In vivo Nonthrombogenicity of Heparin Immobilized Polymer Surfaces, Tran. ASAIO, 36: 168–172.
20.
20. Rigby, A.J. and Anand, S.C. (September 1996). Nonwovens in Medical and Healthcare Products Part 1: Fabric Formation, Tech. Textiles Intern., 22–27.
21.
21. Rigby, A.J. and Anand, S.C. (October 1996). Nonwovens in Medical and Healthcare Products Part 2: Materials and Applications, Tech. Textiles Intern., 24–29.
22.
22. Kane, J.B., Tompkins, R.G., Yarmusb, M.L. and Burke, J.F. (1996). Biomaterials Science: An Introduction to Materials in Medicine, pp. 360–370, Academic Press, San Diego, CA, USA.
23.
23. Hoffman, A.S. (1995). Adsorption and Immobilization of Proteins on Gas Discharge-Treated Surfaces, J. Appl. Polym. Sci.: Appl. Polym. Symp., 46: 341–359.
24.
24. Ratner, B.D. (1995). Surface Modification of Polymers – Chemical, Biological and Surface Analytical Challenges, Biosensors and Bioelectronics, 10: 797–804.
25.
25. Kang, I.K., Kwon, B.K., Lee, J.H. and Lee, H.B. (1993). Immobilization of Proteins on Poly(methyl methacrylate) Films, Biomaterials, 14: 792–797.
26.
26. Bradford, M.M. (1972). A Rapid and Sensitive Method for the Quantitation of Microgram Quantities of Protein Utilizing the Principle of Protein-Dye Binding, Anal. Biochem., 72: 248–252.
27.
27. Vasilets, V.N., Hermel, G., Konig, U., Werner, C., Muller, M., Simon, F., Grundke, K., Ikada, Y. and Jacobasch, H.J. (1997). Microwave CO2 Plasma-initiated Vapor-phase Graft-polymerization of Acrylic-acid onto Polytetrafluoroethylene for Immobilization of Human Thrombomodulin, Biomaterials, 18: 1139–1145.
28.
28. Lin, J.C., Chen, Y.F. and Chen, C.Y. (1999). Surface Characterization and Platelet Adhesion Studies of Plasma Polymerized Phosphite and Its Copolymers with Dimethylsulfate, Biomaterials, 20: 1439–1447.
29.
29. Yasuda, H. (1985). Plasma Polymerization, pp. 73–177, Academic Press Inc., Orlando, FL, USA.
30.
30. Liao, J.D., Wang, M.C., Weng, C.C., Klauser, R., Frey, S., Zharnikov, M. and Grunze, M. (2002). Modification of Alkanethiolate Self-assembled Monolayers by Free Radical-dominant Plasma, J. Phys. Chem. B, 106(1): 77–84.
31.
31. Harris, D.C. (1995). Quantitative Chemical Analysis, pp. 101–105, W. H. Freeman and Company, New York, USA.
32.
32. Baker, E.N., Anderson, B.F., Baker, H.M., Haridas, M., Norris, G.E., Rumball, S.V. and Smith, C.A. (1990). Metal and Anion Binding Sites in Lactoferrin and Related Protein, Pure and Appl. Chem., 62(6): 1067–1070.
34. Ikada, Y. and Uyama, Y. (1993). Lubricating Polymer Surface, pp. 73–90, Technomic Pub. Co., Lancaster, PA, USA.
35.
35. Chen, Y.W., Liao, J.D., Kau, J.Y., Huang, J. and Chang, W.T. (2000). Surface Modification of Extended Polytetrafluoroethylene Sheets Assisted by CO2 Antenna Coupling Microwave Plasma, Marcomolecules, 33: 5638–5643.
36.
36. Yang, J.M., Wang, M.C., Hsu, Y.G., Chang, C.H. and Lo, S.K. (1998). Preparation of Heparin Containing SBS-g-VP Copolymer Membrane for Biomaterial Usage, J. Appl. Polym. Sci., 138: 19–27.
37.
37. Yang, J.M., Jong, Y.J., Hsu, K.Y. and Chang, C.H. (1998). Preparation and Characterization of Heparin Containing SBS-g-DMAEMA Copolymer Membrane, J. Biomed. Mater. Res., 39: 86–91.
38.
38. Lee, S.D., Hsiue, G.H. and Kao, C.Y. (1996). Preparation and Characterization of a Homobifunctional Silicone Rubber Membrane Grafted with Acrylic Acid via Plasma Induced Grafted Copolymerization, J. Appl. Polym. Sci., 34: 141–148.
39.
39. Smith, P.K., Mallia, A.K. and Hermanson, G.T. (1980). Colorimetric Method for the Assay of Heparin Content in Immobilized Heparin Preparations, Analytical Biochemistry, 109: 466–472.
40.
40. Welle, A., Liao, J.D., Kaiser, K., Grunze, M., Mader, U. and Blank, N. (1997). Interactions of N, N0-di-methyl Amino-ethanol with Steel Surfaces in Alkaline and Chlorine Containing Solutions, Applied Surface Science, 119: 185–198.
41.
41. Pawloski, J.R., Swaminathan, R.V. and Stamler, J.S. (1998). Cell-Free and Erythrocytic S-Nitrosohemoglobin Inhibits Human Platelet Aggregation, Circulation, 97: 263–267.
42.
42. Piao, A.Z., Jacobs, H.A., Park, K.D. and Kim, S.W. (1992). Heparin Immobilization by Surface Amplification, ASAIO Journal, 38: M638–M643.
43.
43. Lee, R.E. (1993). Scanning Electron Microscopy and X-ray Microanalysis, pp. 272–328, PTR Prentice Hall Inc., New Jersey, USA.
44.
44. Liao, J.D.Microwave Plasma Technique: Approach to an Uniform and Effective Treatment, J. Polym. Sci., (in press).
45.
45. Liao, J.D., Yu, Y.S. and Wei, P. (1999). Makingand Evaluation of a Plasma Density Measuring System, Chung Yuan Journal, 27(1): 89–93.
46.
46. Wei, P. (1995). Characterization and Modelingof Microwave Plasma Used for Materials Processing, PhD Thesis, The Pennsylvania State University, USA.
47.
47. Grill, A. (1993). Cold Plasma in Materials Fabrication, from Fundamentals to Application, pp. 129–137, IEEE Press, New York, USA.
48.
48. Liao, J.D., Wu, T.H. and Tseng, T.L. (1997). Low Temperature Microwave Plasma Applied to Polymeric Materials: Influence of Temperature with Respect to the Decay of Free Radicals, Proc. Soc. for Mat. Sci., 1: 13–16.
49.
49. Ito, Y., Kajihara, M. and Imanishi, Y. (1986). Synthesis and Antithrombogenicity of Anionic Polyurethanes and Heparin-bound Polyurethanes, J. Biomed. Mater. Res., 20: 1157–1177.
50.
50. Kang, I.K., Kwon, O.H., Lee, Y.M. and Sung, Y.K. (1996). Preparation and Surface Characterization of Functional Group-grafted and Heparinimmobilized Polyurethanes by Plasma Glow Discharge, Biomaterials, 17: 841–847.
51.
51. Fransson, L.A., Malmstroem, A., Sjoeberg, I. and Huckerby, T.N. (1980). Periodate Oxidation and Alkaline Degradation of Heparin-related Glycans, Carbohydr. Res., 80(1): 131–145.
52.
52. Moulder, J.F., Stickle, W.F., Sobol, P.E. and Bomben, K.D. (1995). Handbook of X-ray Photoelectron Spectroscopy, Physical Electronics, pp. 42–43, Minnesota, USA.
53.
53. Beamson, G. and Briggs, D. (1992). High Resolution XPS of Organic Polymers: The Scienta ESCA300 Database, p. 110-110, Appendix 1–4, John Wiley & Sons Inc., New York, USA.
54.
54. Persson, E., Ezban, M. and Shymko, R.M. (1995). Kinetics of the Interaction Between the Human Factor VIIIa Subunits: Effect of pH, Ionic Strength, Ca2+ Concentration, Heparin, and Activated Protein C-catalyzed Proteolysis, Biochemistry, 34: 12775–12781.
55.
55. O’Brien, J.R., Shoobridge, S.M. and Finch, W.J. (1969). Comparison of the Effect of Heparin and Citrate on Platelet Aggregation, J. Clin. Pathol., 22: 28–35.
56.
56. Kwaan, H.C. and Samama, M.M. (1991). Clinical Thrombosis, pp. 13–22, CRC Press Inc., Boca Raton, FL, USA.
57.
57. Park, K.D., Piao, A.Z., Jacobs, H.A., Okano, T. and Kim, S.W. (1991). Synthesis and Characterization of SPUU-PEO-Heparin Graft Copolymers, J. Polym. Sci., Part A: Polym. Chem., 29: 1725–1737.
58.
58. Hemker, H.C., Bendetowicz, A.V. and Béguin, S. (1991). Elements Form In Vitro Studies that Help Understand the Action of Heparin, Thrombosis Research Suppl., XIV: 1–10.
59.
59. Mannhalter, C. (1993). Biocompatibility of Artificial Surface such as Cellulose and Related Materials, Sens. Actuator B, 11: 273–279.
60.
60. Han, D.K., Lee, N.Y., Park, K.D., Kim, Y.H., Cho, H.I. and Min, B.G. (1995). Heparin-like Anticoagulant Activity of Sulphonated Poly(ethylene oxide) and Sulphonated Poly(ethylene oxide)-Grafted Polyurethane, Biomaterials, 16: 467–471.
61.
61. Roka, L. and Bleyl, H. (1983). Activation of the Reaction of Thrombin with AT-III by Heparin is pH Dependent, Inst. Klin. Chem. Pathobiochem., Ann. Univ. Sarav. Med., Suppl., pp. 73–74. Univ. Giessen, Giessen, Fed. Rep. Ger.
