The modelling of different parts of Submerged Arc Furnace(SAF) used in ferroalloy production has been investigated and the summary showed that both 2D and 3D simulations will help to improve the process for ferroalloys production. However, most of the developed models are in lack of verification from the industry, which needs to be studied or improved in future. And the modelling on electrodes and lining of SAF is helpful for better understanding the inside environment of the furnace hence decreasing the breaking of electrodes, prolonging the lifetime of lining. Modelling of converters for ferroalloy refining - Creusot Loire Uddeholm (CLU)showed some useful results in terms of mass transfer coefficients, mixing times and plume characteristics.
AndersenB.1995a. Dynamical model for the high-temperature part of the carbothermic silicon metal process(INFACON 7.FFF (The Norwegian Ferroalloy Research Organization, SINTEF), Trondheim.
2.
AndersenB.1995b. Process model for carbothermic production of silicon metal [PhD Thesis]. Norwegian University of Science and Technology, Dept. Metallurgy.
3.
AndresenB, TusetJK.1997. Dynamical model for the high-temperature part of the carbothermic silicon metal process. In INFACON 7 Conf. Proc.; Trondheim, Norway. p. 535–544.
4.
BakkenJA, GuL, LarsenHL, SevastyanenkoVG.1997. Numerical modeling of electric arcs. J Eng Phys Thermophys. 70(4):530–543. doi: 10.1007/BF02663569
5.
BowmanB.2014. An electromagnetically stirred slurry model for the smelting zone of a ferroalloy furnace. TMS Annual Meeting. p. 169–178.
6.
ChaenderaA, EricRH.2017. Effect of slag phase on mixing and mass transfer in a model CLU converter. In Chapter in the proceedings of the symposium on application of process engineering principles in materials processing, energy and environmental technologies in Honor of Professor Ramana Reddy; 26 February–2 March 2017; San Diego (USA).
7.
DarmanaD, OlsenJE, TangK, RingdalenE.2012. Modelling concept for submerged arc furnaces. In Ninth International conference on CFD in the minerals and process industries CSIRO; 10–12 December 2012; Melbourne, Australia. p. 1–7.
8.
DongH, WangH, ChuS.2014. A methodology for determining the erosion profile of the freeze lining in submerged arc furnace. J South Afr Inst Min Metall. 114:489–495.
9.
DowningJH, LeavittFW.1980. The mathematical model of a resistive electric smelting furnace. In Proceedings of INFACON II; 12–16 October 1980; Lausanne, Switzerland. p. 83.
10.
GunnewiekLH, OshinowoL, PlikasT.2001. Establishingconfidence in off-gas system design using computational fluid dynamic modelling. In 40th Annual Conf. of Met. of CIM, Symposium on computer applications in metal processing; August 26–29, 2001; Toronto, Canada.
11.
GunnewiekLH, OshinowoL, PlikasT, HaywoodR.2004. The application of numerical modelling to the design of electric furnaces. In Proceedings: tenth international ferroalloys congress; 1–4 February 2004; Cape Town, South Africa. p. 555–564.
12.
HalvorsenSA, DowningJH, ScheiA.1992. A unidimensional model dynamic model for the (ferro) silicon process. Electric Furnace Conf Proc. p. 45–59.
13.
HaywoodRJ, RussellM, WigginsB.2002. Modern design practice in post-combustion off-gas systems for metallurgical furnaces. In Proc. Aus IMM Conf., metallurgical plant design & operating Strategies; 15–16 April 2002; Sidney, Australia.
14.
HeissWD.1982. Modeling and simulation of electric smelting furnaces. Ironmak Steelmak. 2:217.
15.
HerlandEV, SpartaM, HalvorsenSA.2018. 3D models of proximity effects in large FeSi and FeMn furnaces. J S Afr Inst Min Metall. 18:607–617.
16.
JahanshahiS, SunS, ZhangL.2004. Recent developments in physicochemical characterization and modelling of ferroalloy slag systems. J S Afr Inst Min Metall. 104(9):529–540.
17.
JipnangE, MonheimP, OterdoomH.2013. Process optimization model for FeMn and SiMn production. In The thirteenth international ferroalloys congress; 9–13 June 2013; Almaty, Kazakhstan. p. 811–820.
18.
KadkhodabeigiM.2011. Modeling of tapping processes in submerged arc furnaces [PhD Thesis]. Trondheim, Norwegian University of Science and Technology.
19.
KarsteinSI, SkaarM.1999. Monitoring the wear-line of a melting furnace. In 3rd International conference on inverse problems in engineering;Port Ludlow. p. 1–11.
20.
KievitAD, GangulyS, DennisP, PeietrsT.2004. Monitoring and control of furnace 1 freeze lining at Tasmanian electro-metallurgical company. In 10th international ferroalloys congress; Cape Town. p. 477–483.
21.
LupiS.2017. Fundamentals of Electroheat. London: Springer International.
22.
MullerJ, ZietsmanJH, PistoriusPC.2015. Modeling of manganese ferroalloy slag properties and flow during tapping, Muller, J. et al. Metall Mater Trans B. 46(6):2639–2651. doi: 10.1007/s11663-015-0426-7
23.
NyashanuY, AkdoganG, EricRH, TaskinenP.2013. Numerical model of two-phase flow in Creusot-Loire Uddeholm(CLU) converter. In Proceedings of INFACON XIII; June 2013; Almaty Kazakhstan. p. 869.
24.
PalssonH, SaevarsdottirGA, JonssonMT, BakkenJA.2007. Thermal effects on carbon based electrodes close to a high current electric arc, INFACON XI. 695–702.
25.
ParraR, MochónJ, MartínDR, VerdejaJI, BarbésMF, VerdejaLF, KanariN, Ruiz-BustinzaI.2009. Bottom design optimisation of electric arc furnace for ferromanganese production using nodal wear model. Ironmak Steelmak. 36(7):529–536. doi: 10.1179/174328109X443329
26.
RanganathanS, GodiwallaKM.2001. Effect of preheat, bed porosity, and charge control on thermal response of submerged arc furnace producing ferrochromium. Ironmak Steelmak. 28(3):273–278. doi: 10.1179/030192301678145
27.
RavaryB, ColombC, JohansenST.2007. Modelling combustion and thermal NOX formation in electric arc furnaces for the production of ferro-silicon and silicon-metal. In Proceedings of the XI International conference on innovations in the Ferro Alloy industry; Infacon XI, India. p. 499–506.
28.
RoddL, VoermannN, StoberF.2010. SNNC: a new ferro-nickel smelter in Korea, 12th International Ferroalloys Congress, Helsinki. p. 698–700.
29.
SaearsdottirGA, BakkenJA, SevastyanenkoVG, GuL.2001. High-power AC arcs in metallurgical furnaces. High Temp Mater Process. 5(1):21–43.
30.
ScheepersE, YangY, AdemaAT, BoomR, ReuterMA.2010. Process modeling and optimization of a submerged Arc furnace for phosphorus production. Metall Mater Trans B. 41B:990–1005. doi: 10.1007/s11663-010-9403-3
31.
ScheepersE, YangY, ReuterMA, AdemaAT.2006. A dynamic-CFD hybrid model of a submerged arc furnace for phosphorus production. Miner Eng. 19:309–317. doi: 10.1016/j.mineng.2005.07.018
32.
ScheiA, HalvorsenSA.1991. A stoichiometric model of the silicon process. In Ketil Motzfeldt Symposium, Institute of Inorganic Chemistry; The Technical University of Norway. p. 41–56.
33.
ScheiA, LarsenK.1981. A stoichiometric model of the ferrosilicon process. Electric Furnace Conf Proc. 39:301–309.
34.
SridharE, LahiriAK.1994. Steady state model for current and temperature distributions in an electric smelting furnace. Steel Res Int. 65(10):433–437. doi: 10.1002/srin.199401189
35.
SteenkampJD, ReynoldsQG, ErweeMW, SwanepoelS.2019. Freeze-lining formation in submerged arc furnaces producing ferrochrome alloy in South Africa. TMS. 1161–1180.
36.
SævarsdóttirG, PálssonH, JónssonMP, BakkenJA.2007. Electrode erosion in submerged arc furnaces. In Proceedings of the XI International conference on innovations in the Ferro Alloy industry; Infacon XI. p. 752–761.
37.
VanderstaayEC, SwinbourneDR, MonteiroM.2004. A computational thermodynamics model of submerged arc electric furnace for ferromanganese smelting. Min Proc Extr Metal. 113:38–44. doi: 10.1179/037195504225004706
38.
VerdejaLF, ParraR, SanchoJP, BullonJ.2003. Corrosion mechanism and wear prediction of the sole of an electric arc furnace. ISIJ Int. 43(2):192–200. doi: 10.2355/isijinternational.43.192
