Two different alloys were developed from the mixtures of pre-alloyed powders consisting of ferroalloys to get the required composition of austenitic stainless steel via the powder metallurgy technique along with the presence and absence of Y2O3. The subsequent mechanical alloyed powders were subject to vacuum hot pressing at 1200°C. The samples were subject to microstructural characterisation post-vacuum hot pressing process. With the addition of yttria, the structure of the grains was fine for the mechanical alloyed vacuum hot pressed samples. The TEM analysis revealed the presence of heterogeneous distribution of yttria particles along the grain boundaries. With the addition of yttria within the metal matrix, the hot pressed density was increased marginally.
BeddoesG.Valve materials and design. Ironmak Steelmak. 1992; 19:290–296.
2.
SenkovORaoSButlerTEffect of Fe additions on the microstructure and properties of Nb-Mo-Ti alloys. Int J Refract Met Hard Mater. 2020; 89:105221.
3.
LinFChenZLiuBMicrostructure and mechanical properties of iron-containing titanium metal-metal composites. Int J Refract Met Hard Mater. 2020; 90:105225.
4.
DongHYuLLiuYEffect of hafnium addition on the microstructure and tensile properties of aluminum added high-Cr ODS steels. J Alloys Compd. 2017; 702:538–545.
5.
ZhangSUkaiSNishikawaTDevelopment and characterization of γ/α transformable FeCrAl-ODS alloys by cobalt addition. J Alloys Compd. 2019; 797:390–398.
6.
SusilaPSturmDHeilmaierMMicrostructural studies on nanocrystalline oxide dispersion strengthened austenitic (Fe–18Cr–8Ni–2W–0.25Y2O3) alloy synthesized by high energy ball milling and vacuum hot pressing. J Mater Sci. 2010; 45:4858–4865.
7.
ZhangXYangSLiJEvolution of oxide inclusions in stainless steel containing yttrium during thermo-mechanical treatment. J Mater Res Technol.2020;9:5982–5990.
8.
LiHLinBXuREnhanced mechanical properties of Al–Si–Cu–Mn–Fe alloys at elevated temperatures through grain refinement and dispersoid strengthening. Mater Sci Technol. 2020; 36:307–319.
9.
MaoGZhuCWangSThe role of yttrium modifying A357 alloy with sand casting. Mater Sci Technol. 2019; 35:1815–1821.
10.
PatraASaxenaRKarakS.Combined effect of Ni and nano-Y2O3 addition on microstructure, mechanical and high temperature behavior of mechanically alloyed W-Mo. Int J Refract Met Hard Mater. 2016; 60:131–146.
11.
PatraASahooRKarakSEffect of nano Y2O3 dispersion on thermal, microstructure, mechanical and high temperature oxidation behavior of mechanically alloyed W-Ni-Mo-Ti. Int J Refract Met Hard Mater. 2018; 70:134–154.
12.
SaxenaRPatraAKarakSFabrication and characterization of nano-Y2O3 dispersed W-Ni-Nb alloys. Int J Refract Met Hard Mater. 2018; 71:70–81.
13.
MariappanRMuraliAPDharmalingamGInfluence on mechanical properties of hot pressed, solution treated and age hardened 21-4N ODS alloy developed through pre-alloyed powders. Int J Mater Eng Innov. 2020; 11:127–144.
14.
ZhaoQMaZYuLTailoring the secondary phases and mechanical properties of ODS steel by heat treatment. J Mater Sci Technol. 2019; 35:1064–1073.
15.
GanesanDSellamuthuPPrashanthKG.Vacuum hot pressing of oxide dispersion strengthened ferritic stainless steels: effect of Al addition on the microstructure and properties. J Manuf Mater. 2020; 4:93.
16.
SellamuthuPDharmalingamG.Optimization of zirconium and yttrium content in 17Cr ferritic ODS steel through Taguchi analysis. Mater Today: Proc.2021;46:977–985.
17.
SteckmeyerAPraudMFournierBTensile properties and deformation mechanisms of a 14Cr ODS ferritic steel. J Nucl Mater. 2010; 405:95–100.
18.
AlamoALambardVAvertyXAssessment of ODS-14% Cr ferritic alloy for high temperature applications. J Nucl Mater. 2004; 329:333–337.
19.
LiuTShenHWangCStructure evolution of Y2O3 nanoparticle/Fe composite during mechanical milling and annealing. Prog Nat Sci: Mater Int. 2013; 23:434–439.
20.
MaoXOhKHJangJ.Evolution of ultrafine grained microstructure and nano-sized semi-coherent oxide particles in austenitic oxide dispersion strengthened steel. Mater Charact. 2016; 117:91–98.
21.
BenjaminJS.Dispersion strengthened superalloys by mechanical alloying. Metall Trans. 1970; 1:2943–2951.
22.
BenjaminJBomfordM.Effect of yttrium oxide volume fraction and particle size on elevated temperature strength of a dispersic strengthened superalloy. Metall Trans. 1974; 5:615–621.
23.
CardosoKRIzaiasBDSVieiraLDSMechanical alloying and spark plasma sintering of AlCrCuFeZn high entropy alloy. Mater Sci Technol. 2020; 36:1861–1869.
24.
ChenCLuCFengXFabrication of Al–Si coating on Ti–6Al–4 V substrate by mechanical alloying. Mater Manuf Processes. 2018; 33:186–195.
25.
PhanirajMKimD-IShimJ-HMicrostructure development in mechanically alloyed yttria dispersed austenitic steels. Acta Mater. 2009; 57:1856–1864.
26.
LiJRenXZhangYSilicon carbide hot pressing sintered by magnesium additive: microstructure and sintering mechanism. J Mater Res Technol. 2020; 9:520–529.
27.
JayakumarKMathewJJosephMSynthesis and characterization of A356-SiCp composite produced through vacuum hot pressing. Mater Manuf Processes. 2013; 28:991–998.
28.
HaghirTAbbasiMGolozarMInvestigation of α to γ transformation in the production of a nanostructured high-nitrogen austenitic stainless steel powder via mechanical alloying. Mater Sci Eng A. 2009; 507:144–148.
29.
RenzettiRAda Piedade SantosVFreitas NetoESInitial microstructure and retained austenite in 8 Mn steel controlled by cooling rate. Mater Sci Technol. 2019; 35:552–559.
30.
EnayatiMBafandehM.Phase transitions in nanostructured Fe–Cr–Ni alloys prepared by mechanical alloying. J Alloys Compd. 2008; 454:228–232.
31.
PabiSJoardarJMurtyB.Mechanism and kinetics of alloying and nanostructure formation by mechanical methods. Proc Indian Natl Sci Acad A. 2001; 67:1–30.
32.
SnyderRJenkinsR.Introduction to X-ray powder diffractometry. Pennsylvania: Wiley-Interscience; 2012.
33.
HuangLPanYZhangJDensification, microstructure and mechanical performance of TiC/Fe composites by spark plasma sintering. J Mater Res Technol. 2020;9:6116–6124.
34.
PasebaniSCharitIButtDPSintering behavior of Lanthana-bearing nanostructured ferritic steel consolidated via spark plasma sintering. Adv Eng Mater. 2016; 18:324–332.
35.
DuAYangYQinYEffects of heating rate and sintering temperature on 316 L stainless steel powders sintered under multiphysical field coupling. Mater Manuf Processes. 2012; 28:66–71.
36.
LuoSLiuBTianJSintering of titanium in argon and vacuum: pore evolution and mechanical properties. Int J Refract Met Hard Mater. 2020;90:105226.
37.
RawersJBennettJDoanRNitrogen solubility and nitride formation in Fe-Cr-Ni alloys. Acta Metall Mater. 1992; 40:1195–1199.
38.
SninivasNSKutumbaraoV.On the discontinuous precipitates of Cr2N in Cr–Mn–N austenitic stainless steel. Scr Mater. 1997; 37:285–291.
39.
MartínFGarcíaCBlancoYInfluence of sinter-cooling rate on the mechanical properties of powder metallurgy austenitic, ferritic, and duplex stainless steels sintered in vacuum. Mater Sci Eng A. 2015; 642:360–365.
40.
KumarPKSaiNVKrishnaAG.Effect of Y2O3 addition and cooling rate on mechanical properties of Fe-24Cr-20Ni-2Mn steels by powder metallurgy route. Compos Commun. 2018; 10:116–121.
41.
KumarSSChandrasekharSKarakSK.Development of nano-oxide dispersed 304L steels by mechanical milling and conventional sintering. Mater Res. 2016; 19:175–182.
42.
WangMSunHZouLStructural evolution of oxide dispersion strengthened austenitic powders during mechanical alloying and subsequent consolidation. Powder Technol. 2015; 272:309–315.
43.
LiYWeiHZanLEffect of magnesium on the morphology of carbides and on M7C3→ M23C6 carbides transformation in the 21-4N heat-resistant steel. Ironmak Steelmak. 2020; 47:51–58.
44.
FangZZWangHKumarV.Coarsening, densification, and grain growth during sintering of nano-sized powders—a perspective. Int J Refract Met Hard Mater. 2017; 62:110–117.
45.
MiaoYMoKZhouZOn the microstructure and strengthening mechanism in oxide dispersion-strengthened 316 steel: a coordinated electron microscopy, atom probe tomography and in situ synchrotron tensile investigation. Mater Sci Eng A. 2015; 639:585–596.
46.
WangMZhouZSunHMicrostructural observation and tensile properties of ODS-304 austenitic steel. Mater Sci Eng A. 2013; 559:287–292.
47.
GaneshSKarthikPSRamakrishnaMUltra-high strength oxide dispersion strengthened austenitic steel. Mater Sci Eng A. 2021; 814:141192.
48.
BalázsiCZineHRBFurkoMMicrostructural and magnetic characteristics of ceramic dispersion strengthened sintered stainless steels after thermal ageing. Fusion Eng Des. 2019; 145:46–53.
49.
MoriAMamiyaHOhnumaMManufacturing and characterization of Ni-free N-containing ODS austenitic alloy. J Nucl Mater. 2018; 501:72–81.
50.
KumarPKSaiNVKrishnaAG.Effect of Y2O3 and ZrO2 on the microstructure and mechanical properties of nano-ODS 21Cr-9Mn-6Ni steels. Mater Technol. 2018; 52:493–497.
51.
ZhangXYangSLiJTransformation of oxide inclusions in stainless steel containing yttrium during isothermal heating at 1473 K. Metals (Basel). 2019; 9:961.
