This research presents an advanced characterization of Balsa wood waste to evaluate its potential use as raw material for Oriented Strand Board (OSB) panel. For that, chemical, thermal and microstructural characterization of the Balsa wood particles were performed followed by the production and characterization of OSB agglomerated with castor oil polyurethane resin (Pu-Castor oil). The results indicated that the lignin content of the Balsa wood waste was lower than the content found in Pinus spp. wood, used in the industrial production of OSB panels, demonstrating the need for higher resin contents to ensure a perfect agglomeration of the particles. Microstructural analysis indicated that the Balsa wood presented characteristics to be used as a constituent raw material of OSB with Pu-Castor oil. The physical-mechanical characterization indicated that the material can be classified as OSB type 1 in accordance with the EN 300:2006 guidelines and is suitable for application in internal environments.
AkazawaM, KojimaY, KatoY.2016. Effect of pyrolysis temperature on the pyrolytic degradation mechanism of β-aryl ether linkages. J Anal Appl Pyrolysis. 118: 164–174.
2.
BarbiratoGHA, FiorelliJ, JuniorWEL.2018a. Avaliação da resistência ao arrancamento de parafuso em painéis OSB de madeira Balsa residual. In: Encontro Brasileiro em Madeiras e em Estruturas de Madeiras. São Carlos, p. 1–11.
BarbosaV, RamiresEC, RazeraIAT, FrolliniE.2010. Biobased composites from tannin-phenolic polymers reinforced with coir fibers. Ind Crops Prod. 32(3):305–312.
5.
BöhmM.2009. The influence of moisture content on thickness swelling and modulus of elasticity in oriented strand board bending. Wood Res. 54:79–90.
6.
BonduelleGM, IwakiriS, ChiesD, MartinsD.2006. Fatores que influenciam no rendimento em laminação de Pinus spp. Floresta e Ambient. 12(2):35–41.
7.
Bortoletto JúniorG, GarciaJN.2004. Propriedades de resistência e rigidez à flexão estática de painéis osb e compensados. Árvore [Online]. 28(4):563–570. Available from: http://www.scielo.br/pdf/rarv/v28n4/22605.pdf.
8.
ChangHT, YehTF, ChangST.2002. Comparisons of chemical characteristic variations for photodegraded softwood and hardwood with/without polyurethane clear coatings. Polym Degrad Stab. 77:129–135.
9.
ChatelG, RogersRD.2014. Review: oxidation of lignin using ionic liquids – an innovative strategy to produce renewable chemicals. ACS Sustain Chem. Eng. 2:322–339.
10.
ChoiJ-H, ChoM.2013. Computational IR spectroscopy of water: OH stretch frequencies, transition dipoles, and intermolecular vibrational coupling constants. J Chem Phys. 138:174108.
11.
ClaramuntJ, ArdanuyM, García-HortalJA.2010. Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood fibres for reinforcement of cementitious composites. Carbohydr Polym. 79:200–205.
12.
Da SilvaAJP.2006. Aplicação de partículas longas e orientadas de bagaço de cana-de-açúcar na produção de painel particulado similar ao OSB [PhD thesis]. Universidade de São Paulo.
13.
European Committee for Standardization. 1993. European Standard - EN 317: particleboards and fibreboards: determination of swelling in thickness after immersion in water. Bruxelas.
14.
European Committee for Standardization. 1993. European Standard – EN 310: wood-based panels: determination of modulus of elasticity in bending and of bending strength. Bruxelas.
15.
European Committee for Standardization. 2002. European Standard – EN 300: oriented strand boards (OSB): definitions, classification and specifications. Portugal.
16.
FanM, FuF.2017. Advanced high strength natural fibre composites in construction. 1st ed. London: Woodhead Publishing.
17.
FingerZ, LogsdonNB, RochaKJ.2012. da: Descrição dendrológica e caracterização física da madeira de pau-de-balsa procedente de Terra Nova do Norte, MT. In: EBRAMEM. pp. 1–10, Vitória.
18.
FinottiAR, SchneiderVE, WanderPR, HilligÉ, SilvaMD'A.2006. Uso energético de resíduos de madeira na cadeia produtiva de madeira/móveis e possibilidades de geração de créditos de carbono. In: SchneiderVE, NehmeMC, editors. Pólo Moveleiro da Serra – Sistemas de gerenciamento ambiental na indústria moveleira. Serra Gaúcha-RS. Ben F. Orgs. Educs; p. 191–230.
19.
FiorelliJ, GomideCA, LahrFAR, NascimentoMdd, SartoriDdL, Mejia BallesterosJE.2014. Physico-chemical and anatomical characterization of residual lignocellulosic fibers. Cellulose. 21:3269–3277.
20.
FrenchAD.2014. Idealized powder diffraction patterns for cellulose polymorphs. Cellulose. 21(2):885–896.
21.
GuH, WangS, NeimsuwanT, WangS.2005. Comparison study of thickness swell performance of commercial oriented strandboard flooring products. For Prod J. 55:239–245.
22.
HatakeyamaT, NakamuraK, HatakeyamaH.1982. Studies on heat capacity of cellulose and lignin by differential scanning calorimetry. Polymer. 23(12):1801–1804.
23.
IwakiriS.2005. Painéis de madeira reconstituída. Curitiba, 247 p.
24.
IwakiriS, MendesLM, SaldanhaLK, SantosJC.2004. Utilização da madeira de eucalipto na produção de chapas de partículas orientadas – osb. Cerne. 10:46–52.
25.
JanssensDP.1998. The increasing recognition of Oriented Strand Board (OSB) as a preferred structural panel. In Viçosa: Seminário internacional sobre produtos sólidos de madeira de alta tecnologia – encontro sobre tecnologia da madeira de eucalipto.
26.
JonesD, OrmondroydGO, CurlingSF, PopescuCM, PopescuMC.2017. Chemical compositions of natural fibres. Adv High Strength Nat Fibre Compos Constr. 1: 23–58.
27.
MantanisGI, AthanassiadouET, BarbuMC, WijnendaeleK.2018. Adhesive systems used in the European particleboard, MDF and OSB industries . Wood Mater Sci Eng. 13(2):104–116.
28.
MuzelSD, de LimaLR, GavaM, GarciaJN, BarbosaJC, FerreiraBS.2014. Multilayer medium density particleboard using castor oil-based polyurethane resin and Hevea brasiliensis wood. Adv Mater Res. 1025–1026:559–563.
29.
PaviaDL, LampmanGM, KrizGS.1996. Introduction to spectroscopy. 2nd ed. Andover.
Sandler S, Karo W. 1992. Polymer synthesis. 2nd ed. Academic Press, 512 p.
32.
SilvaMC, LopesOR, ColodetteJL, PortoAO, RieumontJ, ChaussyD.2008. Characterization of three non-product materials from a bleached eucalyptus kraft pulp mill, in view of valorising them as a source of cellulose fibres. Ind Crops Prod. 27(3):288–295.
33.
SilversteinR.M., WebsterF.X., KiemleD.J.2005. Spectrometric identification of organic compounds. 550 p.
34.
Van SoestPJ.1994. Nutritional ecology of the ruminant. New York, 476 p.
35.
VitalBR.1973. Effects of species and panel densities on properties of hardwood particleboard. (M.S.). Madison: University of Wisconsin, 111p.
36.
YangH, YanR, ChenH, LeeDH, ZhengC.2007. Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel. 86:1781–1788.
