Functionally graded components are usually preferred for severe and critical service conditions, thanks to the possibility of achieving different complementary material properties within the same structure. Wire + Arc Additive Manufacturing is an emerging technology which lends itself well to the production of sound graded structures. In this study, an integral structure of two functional gradients, namely tantalum to molybdenum, and molybdenum to tungsten, was successfully deposited. A linear gradient was observed in both composition and hardness. Microstructure, elemental composition and hardness were characterised as a function of position, and discussed. The study demonstrates that WAAM has the potential to successfully deposit functionally graded structures of refractory metals, obtaining controlled properties.
ReddyJN.Analysis of functionally graded plates. Int J Numer Methods Eng. 2000; 47:663–684. doi: 10.1002/(SICI)1097-0207(20000110/30)47:1/3<663::AID-NME787>3.0.CO;2-8
2.
KawasakiA, WatanabeR.Concept and P/M fabrication of functionally gradient materials. Ceram Int. 1997; 23:73–83. doi: 10.1016/0272-8842(95)00143-3
PareigeP, RussellKF, StollerRE, Influence of long-term thermal aging on the microstructural evolution of nuclear reactor pressure vessel materials: an atom probe study. J Nucl Mater. 1997; 250:176–183. doi: 10.1016/S0022-3115(97)00264-X
6.
BernsteinA, BowdenNS, MisnerA, Monitoring the thermal power of nuclear reactors with a prototype cubic meter antineutrino detector. J Appl Phys. 2008; 103. doi: 10.1063/1.2899178
7.
BohidarSK, SharmaR, MishraPR.Functionally graded materials: A critical review. Int J Sci Footprints. 2014: 8–29.
8.
SobczakJJ, DrenchevL.Metallic functionally graded materials: A specific class of advanced Composites. J Mater Sci Technol.[Internet].2013; 29:297–316. doi:10.1016/j.jmst.2013.02.006.
9.
NiendorfBT, LeudersS, RiemerA, Functionally graded alloys obtained by additive manufacturing. Adv Eng Mater. 2014; 16:857–861. doi: 10.1002/adem.201300579
10.
PopovichVA, BorisovVE, PopovichAA, Functionally graded Inconel 718 processed by additive manufacturing: crystallographic texture, anisotropy of microstructure and mechanical properties. Mater Des. 2017; 114:441–449. doi: 10.1016/j.matdes.2016.10.075
11.
LiBS, ZhaoS, HouW, Functionally graded Ti-6Al-4 V Meshes with high strength and energy absorption. Adv Eng Mater. 2016; 8:34–38. doi: 10.1002/adem.201500086
12.
NaebeM, ShirvanimoghaddamK.Functionally graded materials: a review of fabrication and properties. Appl Mater Today[Internet]. 2016; 5:223–245. Available from: doi: 10.1016/j.apmt.2016.10.001
DomackMS, BaughmanJM.Development of nickel-titanium graded composition components. Rapid Prototyp J. 2005; 11:41–51. doi: 10.1108/13552540510573383
15.
ShenC, PanZ, CuiuriD, Fabrication of Fe-FeAl functionally graded material using the wire-Arc additive manufacturing process. Metall Mater Trans B. 2016; 47:763–772. doi: 10.1007/s11663-015-0509-5
16.
BobbioLD, OtisRA, PaulJ, Additive manufacturing of a functionally graded material from Ti-6Al-4 V to Invar: experimental characterization and thermodynamic calculations. Acta Mater.[Internet]. 2017; 127:133–142. doi:10.1016/j.actamat.2016.12.070.
17.
CarrollBE, OtisRA, PaulJ, Functionally graded material of 304L stainless steel and inconel 625 fabricated by directed energy deposition: characterization and thermodynamic modeling. Acta Mater.[Internet]. 2016; 108:46–54. doi:10.1016/j.actamat.2016.02.019.
18.
DaoM, GuP, MaewalA, A Micromechanical study of residual stresses in functionally graded materials. Acta Mater. 1996; 45:3265–3276. doi: 10.1016/S1359-6454(96)00405-3
19.
CannilloV, MontorsiM, SiligardiC, Microscale computational simulation and experimental measurement of thermal residual stresses in glass-alumina functionally graded materials. J Eur Ceram Soc. 2006; 26:1411–1419. doi: 10.1016/j.jeurceramsoc.2005.02.012
20.
SoodiM, MasoodSH, BrandtM.Thermal expansion of functionally graded and wafer-layered structures produced by laser direct metal deposition. Int J Adv Manuf Technol. 2013; 69:2011–2018. doi: 10.1007/s00170-013-5157-9
21.
RizakhanovRN, PolyanskiiMN, Barminaa, Functional materials for the piping of nuclear propulsion systems. Inorg Mater Appl Res.[Internet]. 2014; 5:124–128. Available from: http://link.springer.com/10.1134/S2075113314020178.
22.
KhripunovBI, KoidanVS, RyazanovAI, Study of tungsten as a plasma-facing material for a fusion reactor. Phys Procedia[Internet]. 2015; 71:63–67. Available from: doi:10.1016/j.phpro.2015.08.313.
23.
GumbschP.Brittle fracture and the brittle-to-ductile transition of tungsten. J Nucl Mater2003; 323:304–312. doi: 10.1016/j.jnucmat.2003.08.009
24.
WeberT, AktaaJ.Numerical assessment of functionally graded tungsten/steel joints for divertor applications. Fusion Eng Des[Internet]. 2011; 86:220–226. Available from: doi:10.1016/j.fusengdes.2010.12.084.
SegerstarkA, AnderssonJ, SvenssonLE.Investigation of laser metal deposited alloy 718 onto an EN 1.4401 stainless steel substrate. Opt Laser Technol.[Internet].2017; 97:144–153. doi:10.1016/j.optlastec.2017.05.038.
27.
CarrollBE, PalmerTA, BeeseAM.Anisotropic tensile behavior of Ti-6Al-4 V components fabricated with directed energy deposition additive manufacturing. Acta Mater.[Internet].2015; 87:309–320. doi:10.1016/j.actamat.2014.12.054.
28.
BaufeldB, BiestOVd, GaultR.Additive manufacturing of Ti-6Al-4 V components by shaped metal deposition: microstructure and mechanical properties. Mater Des.[Internet.2010; 31:S106–S111. doi:10.1016/j.matdes.2009.11.032.
29.
VilaroT, ColinC, BartoutJD, Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy. Mater Sci Eng A[Internet. 2012; 534:446–451. doi:10.1016/j.msea.2011.11.092.
30.
ThijsL, Montero SistiagaML, WauthleR, Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum. Acta Mater[Internet]. 2013; 61:4657–4668. doi:10.1016/j.actamat.2013.04.036.
31.
ReichardtA, DillonRP, BorgnoniaJP, Development and characterization of Ti-6Al-4 V to 304L stainless steel gradient components fabricated with laser deposition additive manufacturing. Mater Des.[Internet]. 2016; 104:404–413. doi:10.1016/j.matdes.2016.05.016.
32.
ChenSR, GrayGT.Constitutive behavior of tantalum and tantalum-tungsten alloys. Metall Mater Trans A. 1996; 27:2994–3006. doi: 10.1007/BF02663849
33.
DingJ, ColegroveP, MehnenJ, Thermo-mechanical analysis of wire and Arc additive layer manufacturing process on large multi-layer parts. Comput Mater Sci.[Internet. 2011; 50:3315–3322. doi:10.1016/j.commatsci.2011.06.023.
34.
SzostBA, TerziS, MartinaF, A comparative study of additive manufacturing techniques: residual stress and microstructural analysis of CLAD and WAAM printed Ti-6Al-4 V components. Mater Des. 2016; 89:559–567. doi: 10.1016/j.matdes.2015.09.115
