With the advancement in the field of nanotechnology, various researchers have reported an improvement in the friction and wear behaviour of different lubricating oils by the addition of different nano additives. However, the stability of these nano additives remains a challenge. In this paper, the dispersion stability of various nano additives in lubricating oils has been studied in detail. The paper aims to summarize various dispersion stability theories and several methods reported in the literature to improve dispersion stability. Apart from this, a special focus has been laid to highlight the various surfactants used to improve the dispersion stability, particularly the tribological properties. The literature suggests that although a number of studies have been carried out to study the effect of surfactant addition on dispersion stability, however, future developments could be focused to improve the dispersion stability of the existing mono and hybrid nano fluids and their underlying mechanisms.
Abbreviations: SWCNH, single-walled carbon nano-horns; PAO, poly alpha olefin; MoS2, molybdenum di sulphide; H, Hamaker constant, MWCNTs, multi-walled carbon nanotubes; GNF, graphene nanoflakes; DLVO, Derjaguin and Landau Verway and Overbeek; DLS, dynamic light scattering; HLB, hydrophobic lyophilic balance; FERTEM, freeze etching replication transmission electron microscope; SDS, sodium dodecyl sulphate; PTFE, polytetrafluoroethylene; FTIR, Fourier-transform infrared spectroscopy; TBAAc, tetra butyl ammonium acetate; THF, tetrahydrofurane; UV–Vis, ultraviolet visible light; SEM, scanning electron microscope; TEM, transmission electron microscope
BabaZU, ShafiWK, HaqMIU, . Towards sustainable automobiles-advancements and challenges. Prog Ind Ecol an Int J. 2019;13:315–331.
2.
JostP.Economic impact of tribology. Proc Mech Fail Prev Gr. 1976: 117–139.
3.
AnandA, HaqMIU, VohraK, . Role of Green tribology in sustainability of mechanical systems: a state of the art survey. Mater Today Proc. 2017;4:3659–3665.
4.
ShafiWK, RainaA, HaqMIU, . Applications of industrial tribology. Int Res J Eng Technol. 2018;5:1285–1289.
5.
ShafiWK, RainaA, HaqMIU, . Interdisciplinary aspects of tribology. Int Res J Eng Technol. Feb 2018;5(2):5–8.
6.
ShafiWK, RainaA, Ul HaqMI.Friction and wear characteristics of vegetable oils using nanoparticles for sustainable lubrication. Tribol Surf Interfaces. 2018;12:27–43.
7.
KerniL, RainaA, HaqMIU.Performance evaluation of aluminium alloys for piston and cylinder applications. Mater Today Proc. 2018;5:18170–18175.
8.
KoshyCP, RajendrakumarPK, ThottackkadMV.Evaluation of the tribological and thermo-physical properties of coconut oil added with MoS2 nanoparticles at elevated temperatures. Wear. 2015;330:288–308.
9.
RainaA, AnandA.Lubrication performance of synthetic oil mixed with diamond nanoparticles: effect of concentration. Mater Today Proc. 2018;5:20588–20594.
10.
HoriY.Hydrodynamic lubrication. Tokyo: Springer Science & Business Media; 2006.
11.
MobarakHM, MohamadEN, MasjukiHH, . The prospects of biolubricants as alternatives in automotive applications. Renew Sustain Energy Rev. 2014;33:34–43.
12.
RainaA, AnandA.Tribological investigation of diamond nanoparticles for steel/steel contacts in boundary lubrication regime. Appl Nanosci. 2017;7:371–388. DOI:10.1007/s13204-017-0590-y.
13.
RainaA, AnandA.Effect of nanodiamond on friction and wear behavior of metal dichalcogenides in synthetic oil. Appl Nanosci. 2018;8:581–591.
ShafiWK, RainaA, HaqMIU.Tribological performance of avocado oil containing copper nanoparticles in mixed and boundary lubrication regime. Ind Lubr Tribol Part A. 2018;426–427.
16.
KerniL, RainaA, HaqMIU.Friction and wear performance of olive oil containing nanoparticles in boundary and mixed lubrication regimes. Wear. 2019;426:819–827.
17.
NunnN, MahboobaZ, IvanovMG, . Tribological properties of polyalphaolefin oil modified with nanocarbon additives. Diam Relat Mater. 2015;54:97–102.
18.
AluyorEO, Ori-JesuM.The use of antioxidants in vegetable oils – a review. African J Biotechnol. 2008;7:27–43.
WanasundaraP, ShahidiF.Antioxidants: science, technology, and applications. Bailey's Ind Oil Fat Prod. 2005;6:1–7.
21.
GulzarM, MasjukiHH, KalamMA, . Tribological performance of nanoparticles as lubricating oil additives. J Nanoparticle Res. 2016;18:1–25. DOI:10.1007/s11051-016-3537-4.
22.
KimJH, MistryKK, MatsumotoN, . Effect of surfactant on tribological performance and tribochemistry of boric acid based colloidal lubricants. Tribol Surf Interfaces. 2012;6:134–141.
23.
GodfreyD.The lubrication mechanism of tricresyl phosphate on steel. ASLE Trans. 1965;64(8):1–11.
24.
AnandR, RainaA, Ul HaqMI, . Synergism of TiO2 and graphene as nano-additives in bio-based cutting fluid-an experimental investigation. Tribol Trans. 2020: 1–21.
25.
RainaA, AnandA.Influence of surface roughness and nanoparticles concentration on the friction and wear characteristics of PAO base oil. Mater Res Express. 2018;5:95018.
26.
ShafiWK, CharooMS.An overall review on the tribological, thermal and rheological properties of nanolubricants. Tribol Surf Interfaces. 2020;15:1–35.
27.
XieH, JiangB, HeJ, . Lubrication performance of MoS2 and SiO2 nanoparticles as lubricant additives in magnesium alloy-steel contacts. Tribol Int. 2016;93:63–70.
28.
AliMKA, XianjunH, ElagouzA, . Minimizing of the boundary friction coefficient in automotive engines using Al2O3 and TiO2 nanoparticles. J Nanopart Res. 2016;18:1–16.
29.
SgroiM, GiliF, MangheriniD, . Friction reduction benefits in valve-train system using IF-MoS2 added engine oil. Tribol Trans. 2015;58:207–214.
30.
LeeK, HwangY, CheongS, . Performance evaluation of nano-lubricants of fullerene nanoparticles in refrigeration mineral oil. Curr Appl Phys. 2009;9:e128–e131.
31.
PadgurskasJ, RukuižaR, KreivaitisR, . Tribologic behaviour and suspension stability of iron and copper nanoparticles in rapeseed and mineral oils. Tribol Surf Interfaces. 2009;3:97–102.
32.
LouJ, ZhangH, WangR.Experimental investigation of graphite nanolubricant used in a domestic refrigerator. Adv Mech Eng. 2015;7. DOI:10.1177/1687814015571011.
33.
FarhanahAN, SyahrullailS.Evaluation of lubrication performance of RBD palm stearin and its formulation under different applied loads. Jurnal Tribologi. 2016;10:1–15.
34.
ChenY, RennerP, LiangH.Dispersion of nanoparticles in lubricating oil: a critical review. Lubricants. 2019;7. DOI:10.3390/lubricants7010007.
35.
DevendiranDK, AmirthamVA.A review on preparation, characterization, properties and applications of nanofluids. Renew Sustain Energy Rev. 2016;60:21–40.
36.
MoslehM, AtnafuND, BelkJH, . Modification of sheet metal forming fluids with dispersed nanoparticles for improved lubrication. Wear. 2009;267:1220–1225.
37.
SrivyasPD, CharooMS.A review on tribological characterization of lubricants with nano additives for automotive applications. Tribol Ind. 2018;40:594–623.
38.
OwunaFJ.Stability of vegetable based oils used in the formulation of ecofriendly lubricants – a review. Egypt J Pet. 2020;29:251–256.
39.
DasPK.A review based on the effect and mechanism of thermal conductivity of normal nanofluids and hybrid nanofluids. J Mol Liq. 2017;240:420–446.
40.
AliMKA, XianjunH.Role of bis (2-ethylhexyl) phosphate and Al2O3/TiO2 hybrid nanomaterials in improving the dispersion stability of nanolubricants. Tribol Int. 2021;24:105301.
41.
ZawawiNNM, AzmiWH, RedhwanAAM, . Experimental investigation on thermo-physical properties of metal oxide composite nanolubricants. Int J Refrig. 2018;89:11–21.
42.
GulzarM, MasjukiHH, KalamMA, . Dispersion stability and tribological characteristics of TiO2/SiO2 nanocomposite-enriched biobased lubricant. Tribol Trans. 2017;60:670–680.
FedeleL, CollaL, BobboS, . Experimental stability analysis of different water-based nanofluids. Nanoscale Res Lett. 2011;6:1–8.
45.
KalinM, KogovšekJ, RemškarM.Mechanisms and improvements in the friction and wear behavior using MoS2 nanotubes as potential oil additives. Wear. 2012;280:36–45.
46.
Zareh-DesariB, DavoodiB.Assessing the lubrication performance of vegetable oil-based nano-lubricants for environmentally conscious metal forming processes. J Clean Prod. 2016;135:1198–1209.
47.
ZhangM, ChenB, YangJ, . Mos2/reduced graphene oxide hybrid structure and its tribological properties. Rsc Adv. 2015;5:89682–89688.
48.
HwangY, LeeC, ChoiY, . Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discs. J Mech Sci Technol. 2011;25:2853–2857.
49.
HotzeEM, PhenratT, LowryGV.Nanoparticle aggregation: challenges to understanding transport and reactivity in the environment. J Environ Qual. 2010;39:1909–1924.
50.
VoldMJ.Van der Waals’ attraction between anisometric particles. J Colloid Sci. 1954;9:451–459.
51.
ShafiWK, CharooMS.Effect of temperature, concentration and aggregation on the rheological behavior of ZrO2-avocado Oil nanolubricant. Tribol Ind. 2020;42:407–418.
52.
EvansDF, WennerströmH. (1999). The colloidal domain: where physics, chemistry, biology, and technology meet. New York: Wiley-Vch.
53.
JangS, ChungJ, SeoS, . Enhancement of interfacial adhesion based on nanostructured alumina/aluminum laminates. Compos Part B Eng. 2017;129:204–209.
54.
LiY, ZhangD, HeJ, . Hierarchical porous carbon nanosheet derived from waste engine oil for high-performance supercapacitor application. Sustain Energy Fuels. 2019;3(2):499–507.
Van der HoevenPC, LyklemaJ.Electrostatic stabilization in non-aqueous media. Adv Colloid Interface Sci. 1992;42:205–277.
57.
Rubio-HernandezFJ.Is DLVO theory valid for non-aqueous suspensions?J Non Equilibri Thermodyn. 1999;24:75–79.
58.
IijimaM, KamiyaH.Surface modification for improving the stability of nanoparticles in liquid media. KONA Powder Part J. 2009;27:119–129.
59.
DongJ, CortiDS, FransesEI, . Colloidal dispersion stability of CuPc aqueous dispersions and comparisons to predictions of the DLVO theory for spheres and parallel face-to-face cubes. Langmuir. 2010;26:6995–7006.
60.
ZareeiM, YoozbashizadehH, HosseiniHRM.Investigating the effects of pH, surfactant and ionic strength on the stability of alumina/water nanofluids using DLVO theory. J Therm Anal Calorim. 2019;135:1185–1196.
61.
GerberP, MooreMA.Comments on the theory of steric stabilization. Macromol. 1977;10:476–481.
62.
ZhulinaEB, BorisovOV, PriamitsynVA.Theory of steric stabilization of colloid dispersions by grafted polymers. J Colloid Interface Sci. 1990;137:495–511.
63.
SrivastavaSN, HaydonDA.Estimate of the Hamaker constant for paraffinic hydrocarbons in aqueous suspensions. Trans Faraday Soc. 1964;60:971–978.
64.
DeissJL, AnizanP, El HadiguiS, . Steric stability of TiO2 nanoparticles in aqueous dispersions. Colloids Surf A. 1996;106:59–62.
KatabyG, CojocaruM, ProzorovR, . Coating carboxylic acids on amorphous iron nanoparticles. Langmuir. 1999;15:1703–1708.
67.
JiangZ, ZhangY, YangG, . Synthesis of oil-soluble WS2 nanosheets under mild condition and study of their effect on tribological properties of poly-alpha olefin under evaluated temperatures. Tribol Int. 2019;138:68–78.
68.
LiC-C, ChangM-H.Colloidal stability of CuO nanoparticles in alkanes via oleate modifications. Mater Lett. 2004;58:3903–3907.
69.
SuiT, DingM, JiC, . Dispersibility and rheological behavior of functionalized silica nanoparticles as lubricant additives. Ceram Int. 2018;44:18438–18443.
70.
SuiT, SongB, WenY, . Bifunctional hairy silica nanoparticles as high-performance additives for lubricant. Sci Rep. 2016;6:1–9.
71.
NakayamaN, HayashiT.Preparation of TiO2 nanoparticles surface-modified by both carboxylic acid and amine: dispersibility and stabilization in organic solvents. Colloids Surf A. 2008;317:543–550.
72.
MuratM, GrestGS.Structure of a grafted polymer brush: a molecular dynamics simulation. Macromolecules. 1989;22:4054–4059.
73.
YinJ, XiaX, XiangL, . Conductivity and polarization of carbonaceous nanotubes derived from polyaniline nanotubes and their electrorheology when dispersed in silicone oil. Carbon N Y. 2010;48:2958–2967.
74.
MoshkovithA, PerfilievV, VerdyanA, . Sedimentation of IF-WS2 aggregates and a reproducibility of the tribological data. Tribol Int. 2007;40:117–124.
75.
BaharuddinMF, ZakariaIH, AhmadMH, . Effect of surfactant on breakdown strength performance of transformer oil-based nanofluids. J Electr Eng Technol. 2019;14:395–405.
76.
SilambarasanM, ManikandanS, RajanKS.Viscosity and thermal conductivity of dispersions of sub-micron TiO2 particles in water prepared by stirred bead milling and ultrasonication. Int J Heat Mass Transf. 2012;55:7991–8002.
77.
ChangH, LiZY, KaoMJ, . Tribological property of TiO2 nanolubricant on piston and cylinder surfaces. J Alloys Compd. 2010;495:481–484.
78.
WeiB, ZouC, LiX.Experimental investigation on stability and thermal conductivity of diathermic oil based TiO2 nanofluids. Int J Heat Mass Transf. 2017;104:537–543.
79.
AtiyaEG, MansourD-EA, KhattabRM, . Dispersion behavior and breakdown strength of transformer oil filled with TiO2 nanoparticles. IEEE Trans Dielectr Electr Insul. 2015;22:2463–2472.
80.
LuoT, WeiX, HuangX, . Tribological properties of Al2O3 nanoparticles as lubricating oil additives. Ceram Int. 2014;40:7143–7149.
81.
LuoT, WeiX, ZhaoH, . Tribology properties of Al2O3/TiO2 nanocomposites as lubricant additives. Ceram Int. 2014;40:10103–10109.
82.
CremaschiL, BigiAAM, WongT, . Thermodynamic properties of Al2O3 nanolubricants: part 1—effects on the two-phase pressure drop. Sci Technol Built Environ. 2015;21:607–620.
83.
KotiaA, GhoshSK.Experimental analysis for rheological properties of aluminium oxide (Al2O3)/gear oil (SAE EP-90) nanolubricant used in HEMM. Ind Lubr Tribol. 2015;67(6).
84.
KaszubaM, McKnightD, ConnahMT, . Measuring sub nanometre sizes using dynamic light scattering. J Nanoparticle Res. 2008;10:823–829.
85.
SainiV, BijweJ, SethS, . Role of base oils in developing extreme pressure lubricants by exploring nano-PTFE particles. Tribol Int. 2020;143:106071.
86.
GuptaMK, BijweJ.A complex interdependence of dispersant in nano-suspensions with varying amount of graphite particles on its stability and tribological performance. Tribol Int. 2020;142:105968.
87.
TomalaA, RipollMR, GablerC, . Interactions between MoS2 nanotubes and conventional additives in model oils. Tribol Int. 2017;110:140–150.
AdiwibowoMT, IbadurrohmanM.Synthesis of Zno nanoparticles and their nanofluid stability in the presence of a palm oil-based primary alkyl sulphate surfactant for detergent application. Int J Technol. 2018;9:307–316.
90.
JendrzejS, GökceB, BarcikowskiS.Colloidal stability of metal nanoparticles in engine oil under thermal and mechanical load. Chem Eng Technol. 2017;40:1569–1576.
91.
WuP, ChenX, ZhangC, . Modified graphene as novel lubricating additive with high dispersion stability in oil. Friction. 2020: 143–144.
92.
AlazemiAA, DysartAD, PhuahXL, . Mos2 nanolayer coated carbon spheres as an oil additive for enhanced tribological performance. Carbon N Y. 2016;110:367–377.
93.
RainaA, AnandA.Tribological investigation of diamond nanoparticles for steel/steel contacts in boundary lubrication regime. Appl Nanosci. 2017;7:371–388.
94.
WanQ, JinY, SunP, . Tribological behaviour of a lubricant oil containing boron nitride nanoparticles. Procedia Eng. 2015;102:1038–1045.
95.
GuoD, XieG, LuoJ.Mechanical properties of nanoparticles: basics and applications. J Phys D Appl Phys. 2013;47:13001.
96.
AsadauskasS, BražinskieneD, BikulčiusG, . Surfactant influence on stability and lubrication properties of metal nanoparticle suspensions in oil. Surf Tribl. 2014;4:151–182.
RabasoP, VilleF, DassenoyF, . Boundary lubrication: influence of the size and structure of inorganic fullerene-like MoS2 nanoparticles on friction and wear reduction. Wear. 2014;320:161–178.
KissaE.Fluorinated surfactants and repellents. Vol. 97. Florida: CRC Press; 2001.
102.
KoleM, DeyTK.Effect of aggregation on the viscosity of copper oxide–gear oil nanofluids. Int J Therm Sci. 2011;50:1741–1747.
103.
ChoiY, HwangY, ParkM, . Investigation of anti-wear and extreme pressure properties of nano-lubricant using graphite and Ag nanoparticles. J Nanosci Nanotechnol. 2011;11:560–565.
104.
GuptaRN, HarshaAP.Antiwear and extreme pressure performance of castor oil with nano-additives. Proc Inst Mech Eng Part J J Eng Tribol. 2018;232:1055–1067.
105.
Sánchez-LópezJC, AbadMD, KolodziejczykL, . Surface-modified Pd and Au nanoparticles for anti-wear applications. Tribol Int. 2011;44:720–726.
106.
YangK, PengH, WenY, . Re-examination of characteristic FTIR spectrum of secondary layer in bilayer oleic acid-coated Fe3O4 nanoparticles. Appl Surf Sci. 2010;256:3093–3097.
107.
ZhangL, FuH, ZhuY.Efficient TiO2 photocatalysts from surface hybridization of TiO2 particles with graphite-like carbon. Adv Funct Mater. 2008;18:2180–2189.
108.
SongX, ZhengS, ZhangJ, . Synthesis of monodispersed ZnAl2O4 nanoparticles and their tribology properties as lubricant additives. Mater Res Bull. 2012;47:4305–4310.
109.
MaS, ZhengS, CaoD, . Anti-wear and friction performance of ZrO2 nanoparticles as lubricant additive. Particuology. 2010;8:468–472.
110.
YuL, ZhangL, YeF, . Preparation and tribological properties of surface-modified nano-Y2O3 as additive in liquid paraffin. Appl Surf Sci. 2012;263:655–659.
