CuCr2O4 spinel is a candidate coating material for central receivers in concentrating solar power to protect structural alloys against high temperature oxidation and related degradation. Coating performance and microstructure of dip-coated and sintered coatings is dictated by the initial particle size of the CuCr2O4 and sintering temperature, but can be compromised by particle agglomeration. In this study, sub-micron particles were synthesised through the Pechini and modified Pechini sol–gel methods. Phase composition was confirmed via X-ray diffraction. Particle growth during calcination of the nanoparticles at different temperatures (650°C, 750°C, 850°C) and times (between 1 and 24 h) was measured via laser diffraction and scanning electron microscopy. The modified Pechini method displayed evidence of smaller particle sizes and greater agglomeration. The kinetics of particle growth observed are consistent with a diffusion limited inhibited grain growth model.
HoCK, ChristianJM, RomanoD, . Characterization of particle flow in a free-falling solar particle receiver. ASME J Sol Energy Eng. 2017;139(2):021011, doi:10.1115/1.4035258
2.
HallA, AmbrosiniA, HoC.Solar selective coatings for concentrating solar power central receivers. Adv Mater Processes. 2012;170:28–32. doi:10.31399/asm.amp.2012-01.p028
3.
HarzallahR, LarnicolM, LeclercqC, . Development of high performances solar absorber coatings. AIP Conf Proc. 2019;2126:030026, doi:10.1063/1.5117538
4.
JacksonGS, ImponentiL, AlbrechtKJ, . Inert and reactive oxide particles for high-temperature thermal energy capture and storage for concentrating solar power. ASME J Sol Energy Eng. 2019;141(2):021016), doi:10.1115/1.4042128
5.
RubinEB, ChenY, ChenR.Optical properties and thermal stability of Cu spinel oxide nanoparticle solar absorber coatings. Sol Energy Mater Sol Cells. 2019;195:81–88. doi:10.1016/j.solmat.2019.02.032
PrasadR, SinghP.Applications and preparation methods of copper chromite catalysts: a review. Bull Chem React Eng Catal. 2011;6(2):63–113. doi:10.9767/bcrec.6.2.829.63-113
8.
HabibiMH, FakhriF.Sol–gel combustion synthesis and characterization of nanostructure copper chromite spinel. J Therm Anal Calorim. 2014;115:1329–1333. doi:10.1007/s10973-013-3480-x
9.
MaP, GengQ, LiuG.Photothermal conversion applications of the transition metal (Cu, Mn, Co, Cr, and Fe) oxides with spinel structure. In: SeehraMohindar, editor. Magnetic spinels – synthesis, properties and applications. Rijeka: IntechOpen; 2017. doi:10.5772/67210
10.
HosseiniSG, AbazariR, GaviA.Pure CuCr2O4 nanoparticles: synthesis, characterization and their morphological and size effects on the catalytic thermal decomposition of ammonium perchlorate. Solid State Sci. 2014;37:72–79. doi:10.1016/j.solidstatesciences.2014.08.014
11.
LiW, ChengH.Synthesis and characterization of Cu-Cr-O nanocomposites. J Cent South Univ Technol. 2007;14:291–295. doi:10.1007/s11771-007-0057-5
12.
ShafqatMB, AliM, AtiqS, . Structural, morphological and dielectric investigation of spinel chromite (XCr2O4, X = Zn, Mn, Cu & Fe) nanoparticles. J Mater Sci: Mater Electron. 2019;30; doi:10.1007/s10854-019-02111-4
13.
ChenW-F, MofarahSS, HanaorDAH, . Enhancement of Ce/Cr codopant solubility and chemical homogeneity in TiO2 nanoparticles through sol–gel versus Pechini syntheses. Inorg Chem. 2018;57(12):7279–7289. doi:10.1021/acs.inorgchem.8b00926
14.
KunduraciM, AmatucciGG.The effect of particle size and morphology on the rate capability of 4.7 V LiMn1.5+δNi0.5−δO4 spinel lithium-ion battery cathodes. Electrochim Acta. 2008;53(12):4193–4199. doi:10.1016/j.electacta.2007.12.057
15.
PechiniMP. Method of preparing lead and alkaline earth titanates and niobates and coating method using the same to form a capacitor. United States patent US 3,330,697, 1967 Jul 11.
16.
AnkiMMT, BenoitL.Optical constants of various chromites as determined by Kramers–Kronig analysis. Appl Opt. 1996;35(9):1399–1403. doi:10.1364/AO.35.001399
GhoshS, DivyaD, RemaniKC, . Growth of monodisperse nanocrystals of cerium oxide during synthesis and annealing. J Nanopart Res. 2010;12:1905–1911. doi:10.1007/s11051-009-9753-4
19.
TelekiA, WengelerR, WengelerL, . Distinguishing between aggregates and agglomerates of flame-made TiO2 by high-pressure dispersion. Powder Technol. 2008;181(3):292–300. doi:10.1016/j.powtec.2007.05.016
LiuZ, WangG, LiuX, . Preparation of CuCrO2 and the photocatalytic properties of its composites. J Fuel Chem Technol. 2013;41(12):1473–1480. doi:10.1016/S1872-5813(14)60007-4
22.
AliRF, GatesBD.Synthesis of lithium niobate nanocrystals with size focusing through an Ostwald ripening process. Chem Mater. 2018;30(6):2028–2035. doi:10.1021/acs.chemmater.7b05282
23.
MucheDNF, MarpleMAT, SenS, . Grain boundary energy, disordering energy and grain growth kinetics in nanocrystalline MgAl2O4 spinel. Acta Mater. 2018;149:302–311. doi:10.1016/j.actamat.2018.02.052
24.
KapadiaCM, LeipoldMH. The mechanism of grain growth in ceramics. Legacy CDMS. 1972. Document ID 19730023692.
25.
LiJ, GuoC, MaY, . Effect of initial particle size distribution on the dynamics of transient Ostwald ripening: a phase field study. Acta Mater. 2015;90:10–26. doi:10.1016/j.actamat.2015.02.030
26.
TingJM, LinRY.Effect of particle size distribution on sintering. J Mater Sci. 1995;30:2382–2389. doi:10.1007/BF01184590
27.
HuH, RathBB.On the time exponent in isothermal grain growth. Metall Mater Trans B. 1970;1:3181–3184. doi:10.1007/BF03038435
28.
LopezHF, MendozaH.Temperature effects on the crystallization and coarsening of nano-CeO2 powders. Int Sch Res Notices. 2013;2013: 1–7. Article ID 208614. doi:10.1155/2013/208614
29.
WangS, LiD, YangC, . A novel method for the synthesize of nanostructured MgFe2O4 photocatalysts. J Sol-Gel Sci Technol. 2017;84:169–179. doi:10.1007/s10971-017-4471-3
30.
DanksAE, HallSR, SchneppZ.The evolution of ‘sol–gel’ chemistry as a technique for materials synthesis. Mater Horiz. 2016;3:91–112. doi:10.1039/C5MH00260E
31.
CarstensS, SplithC, EnkeD.Sol-gel synthesis of α-Al2O3 with enhanced porosity via dicarboxylic acid templating. Sci Rep. 2019;9:19982, doi:10.1038/s41598-019-56294-1
32.
TikkanenH, SuciuC, WærnhusI, . Dip-coating of 8YSZ nanopowder for SOFC applications. Ceram Int. 2011;37(7):2869–2877. doi:10.1016/j.ceramint.2011.05.006
33.
Schorne-PintoJ, ChartrandP, BarnabéA, . Thermodynamic and structural properties of CuCrO2 and CuCr2O4: experimental investigation and phase equilibria modeling of the Cu–Cr–O system. J Phys Chem C. 2021;125(27):15069–15084. doi:10.1021/acs.jpcc.1c04179
34.
BenreguiaN, AbdiA, MahrouaO, . Semiconducting and photoelectrochemical characterizations of CuCrO2 powder synthesized by sol-gel method. J Solid State Electrochem. 2018;22:2499–2506. doi:10.1007/s10008-018-3967-2
35.
KrauseM, SonnenbergJ, MunnikF, . Formation, structure, and optical properties of copper chromite thin films for high-temperature solar absorbers. Materialia. 2021;18:101156, doi:10.1016/j.mtla.2021.101156
36.
SathiskumarPS, ThomasCR, MadrasG.Solution combustion synthesis of nanosized copper chromite and its use as a burn rate modifier in solid propellants. Ind Eng Chem Res. 2012;51(30):10108–10116. doi:10.1021/ie301435r
