This study was designed to evaluate the effect of different treatments on the zirconia/resin shear bond strength (SBS) using commercial one-bottle universal adhesive. Zirconia discs with different surface treatments (blank control; airborne-particle-abrasion; glazing) were bonded to the bovine enamel surfaces using one-bottle universal adhesive. All specimens were tested for SBS (MPa) before and after 10000 thermocycles. Statistically analysis were conducted by using one-way analysis of variance and multiple-comparison least significant difference tests (α = 0.05). Airborne-particle-abrasion group showed higher SBS (36.19 ± 11.86) than control group (14.98 ± 5.90) and glazing group (10.63 ± 5.39) (p < 0.05). After thermocycling test, the SBS significantly decreased for control group (8.84 ± 2.55) and glazing group (6.18 ± 2.78) while not for airborne-particle-abrasion group (41.5 ± 7.95). One-bottle universal adhesives combined with airborne-particle-abrasion showed quite high SBS of zirconia/resin, which was appropriate for bonding of zirconia restoration.
PiconiC, MaccauroG.Zirconia as a ceramic biomaterial. Biomaterials. 1999;20(1):1–25. doi: 10.1016/S0142-9612(98)00010-6
2.
ThompsonJY, StonerBR, PiascikJR, Adhesion/cementation to zirconia and other non-silicate ceramics: where are we now?Dent Mater. 2011;27(1):71–82. doi: 10.1016/j.dental.2010.10.022
3.
RuyterEI, VajeestonN, KnarvangT, A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements. Acta Biomater Odontol Scand. 2017;3(1):36–46. doi: 10.1080/23337931.2017.1309658
4.
XieHF, LiQ, ZhangFM, Comparison of resin bonding improvements to zirconia between one-bottle universal adhesives and tribochemical silica coating, which is better?Dent Mater. 2016;32(3):403–411. doi: 10.1016/j.dental.2015.12.014
5.
LungCYK, BotelhoMG, HeinonenM, Resin zirconia bonding promotion with some novel coupling agents. Dent Mater. 2012;28(8):863–872. doi: 10.1016/j.dental.2012.04.023
6.
BurkeFJ, FlemingGJ, NathansonD, Are adhesive technologies needed to support ceramics? An assessment of the current evidence. J Adhes Dent. 2002;4(1):7–22.
7.
SuN, YueL, LiaoY, The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin. J Adv Prosthodont. 2015;7(6):214–223. doi: 10.4047/jap.2015.7.3.214
8.
PapiaE, LarssonC, du ToitM, Bonding between oxide ceramics and adhesive cement systems: a systematic review. J Biomed Mater Res B Appl Biomater. 2014;102(2):395–413. doi: 10.1002/jbm.b.33013
9.
InokoshiM, KameyamaA, De MunckJ, Durable bonding to mechanically and/or chemically pre-treated dental zirconia. J Dent. 2013;41(2):170–179. doi: 10.1016/j.jdent.2012.10.017
10.
KumbulogluO, LassilaLVJ, UserA, Bonding of resin composite luting cements to zirconium oxide by two air-particle abrasion methods. Ope Dent. 2006;31(2):248–255. doi: 10.2341/05-22
11.
CasucciA, OsorioE, OsorioR, Influence of different surface treatments on surface zirconia frameworks. J Dent. 2009;37(11):891–897. doi: 10.1016/j.jdent.2009.06.013
12.
AboushelibMN, KleverlaanCJ, FeilzerAJ.Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials. J Prost Dent. 2007;98(5):379–388. doi: 10.1016/S0022-3913(07)60123-1
13.
JevnikarP, KrnelK, KocjanA, The effect of nano-structured alumina coating on resin-bond strength to zirconia ceramics. Dent Mater. 2010;26(7):688–696. doi: 10.1016/j.dental.2010.03.013
14.
YangB, BarloiA, KernM.Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater. 2010;26(1):44–50. doi: 10.1016/j.dental.2009.08.008
15.
AurélioIL, MarchionattiAM, MontagnerAF, Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis. Dent Mater. 2016;32(6):827–845. doi: 10.1016/j.dental.2016.03.021
16.
XibleAA, de Jesus TavarezR, de ArauhoCRP, Effect of silica coating and silanization on flexural and composite-resin bond strengths of zirconia posts: an in vitro study. J Prosthet Dent. 2006;95(3):224–229. doi: 10.1016/j.prosdent.2005.12.010
17.
DerandT, MolinM, KvamK.Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater. 2005;21(12):1158–1162. doi: 10.1016/j.dental.2005.02.005
18.
SariF, SecilmisA, SimsekI, Shear bond strength of indirect composite material to monolithic zirconia. J Adv Prosthodont. 2016;8(4):267–274. doi: 10.4047/jap.2016.8.4.267
19.
ElsakaSE.Influence of surface treatments on the bond strength of resin cements to monolithic zirconia. J Adhes Dent. 2016;18(5):387–395.
20.
PassiaN, MitsiasM, LehmannF, Bond strength of a new generation of universal bonding systems to zirconia ceramic. J Mech Behav Biomed Mater. 2016;62:268–274. doi: 10.1016/j.jmbbm.2016.04.045
21.
ChuangSF, KangLL, LiuYC, Effects of silane- and MDP-based primers application orders on zirconia-resin adhesion-A ToF-SIMS study. Dent Mater. 2017;33(8):923–933. doi: 10.1016/j.dental.2017.04.027
22.
PittaJ, BrancoTC, PortugalJ.Effect of saliva contamination and artificial aging on different primer/cement systems bonded to zirconia. J Prosthet Dent. 2017[Sep 27]. doi: 10.1016/j.prosdent.2017.07.006
23.
ZhangY, LawnBR, RekowED, Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res B Appl Biomater. 2004;71(2):381–386. doi: 10.1002/jbm.b.30097
24.
OzerF, NadenA, TurpV., Effect of thickness and surface modifications on flexural strength of monolithic zirconia. J Prosthet Dent. 2017[Oct 14]. doi: 10.1016/j.prosdent.2017.08.007
25.
KosmacT, OblakC, JevnikarP, The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15(6):426–433. doi: 10.1016/S0109-5641(99)00070-6
26.
ChouguleKJ, WadkarAP.An in vitro comparative evaluation of flexural strength of monolithic zirconia after surface alteration utilising two different techniques. J Clin Diagn Res. 2017;11(8):20–23.
27.
LaiX, SiW, JiangD, Effects of small-grit grinding and glazing on mechanical behaviors and ageing resistance of a super-translucent dental zirconia. J Dent. 2017;66(8):23–31. doi: 10.1016/j.jdent.2017.09.003
28.
CedomirO, AndražK, PeterJ, The effect of mechanical fatigue and accelerated ageing on fracture resistance of glazed monolithic zirconia dental bridges. J Eur Ceram Soc. 2017;37(14):4415–4422. doi: 10.1016/j.jeurceramsoc.2017.04.048
29.
WangG, ZhangS, BianC, Effect of zirconia surface treatment on zirconia/veneer interfacial toughness evaluated by fracture mechanics method. J Dent. 2014;42(7):808–815. doi: 10.1016/j.jdent.2014.04.005
30.
BarraganG, ChasqueiraF, Arantes-OliveiraS, Ceramic repair: influence of chemical and mechanical surface conditioning on adhesion to zirconia. Oral Health Dent Manag. 2014;13(2):155–158.
31.
MoradabadiA, RoudsariSE, YektaBE, Effects of surface treatment on bond strength between dental resin agent and zirconia ceramic. Mater Sci Eng C Mater Biol Appl. 2014;34:311–317. doi: 10.1016/j.msec.2013.09.015
