In this study, the colour coordinate behaviours according to the surface area of phosphors were investigated to implement the colour coordinate of the desired zone in a random colour coordinate. For this purpose, the mixing ratio and dispensing amount of a green phosphor (Ce:YAG) and three red phosphors (CaAlSiN3:Eu2+) with different specific surface areas were adjusted, and the corresponding colour coordinate behaviour was examined. As a result, the colour coordinate behaviour was found to be considerably influenced by the mixing ratio of red and green phosphors and the surface area of the phosphor powder particles. In conclusion, the colour coordinate of the desired zone can be more efficiently implemented by predicting the characteristics of different types of phosphors and their colour coordinate behaviours. The findings of this study are expected to greatly increase the yield of the light-emitting diode industry.
ShujiN., PeartonS. and FasolG.: ‘The blue laser diode: the complete story’, 1st edn, 1–364; 2000, New York, Springer.
2.
YamadaM., MitaniT., NarukawaY., ShiojiS., NikiI., SonobeS., DeguchiK., SanoM. and MukaiT.: ‘InGaN-based near-ultraviolet and blue-light-emitting diodes with high external quantum efficiency using a patterned sapphire substrate and a mesh electrode’, Jpn. J. Appl. Phys., 2002, 41, L1431–L1433. doi: 10.1143/JJAP.41.L1431
3.
PimputkarS., SpeckJ. S., DenBaarsS. P. and NakamuraS.: ‘Prospects for LED lighting’, Nat. Photonics, 2009, 3, 180–182. doi: 10.1038/nphoton.2009.32
4.
KanjiB., KenshoS., YasunobuN. and YoshinoriS.: ‘Development of high-bright and pure-white LED lamps’, J. Light Vis. Env., 1998, 22, 2–5. doi: 10.2150/jlve.22.1_2
5.
WangL., ZhangH., WangX. J., DierreB., SuehiroT., TakedaT., HirosakiN. and XieR. J.: ‘Europium(ii)-activated oxonitridosilicate yellow phosphor with excellent quantum efficiency and thermal stab ility – a robust spectral conversion material for highly efficient and reliable white LEDs’, Phys. Chem. Chem. Phys., 2015, 17, 15797–15804. doi: 10.1039/C5CP01860A
6.
SubramanianM., SchuurmansF. J. and PashleyM. D.: Industry applications conference, 2002. 37th IAS Annual Meeting, Pittsburgh, PA, USA, 2002, 327–333.
7.
MuthuS. and GainesJ.: Industry applications conference, 2003. 38th IAS Annual Meeting, Salt Lake City, UT, USA, 2003, 515–522.
8.
WangY., WangY., ChiN., YuJ. and ShangH.: ‘Demonstration of 575-Mb/s downlink and 225-Mb/s uplink bi-directional SCM-WDM visible light communication using RGB LED and phosphor-based LED’, Opt. Express, 2013, 21, 1203–1208. doi: 10.1364/OE.21.001203
9.
TangC.-W., HuangB.-J. and YingS.-P.: ‘Illumination and color control in red–green–blue light-emitting diode’, IEEE Trans. Power Electron., 2014, 29, 4921–4937. doi: 10.1109/TPEL.2013.2251428
10.
ZhangX. and GongM.: ‘Single-phased white-light-emitting NaCaBO3:Ce3+,Tb3+,Mn 2+ phosphors for LED applications’, J. Chem. Soc., Dalton Trans., 2014, 43, 2465–2472. doi: 10.1039/C3DT52328D
11.
SeongJ. H. and JeonD. Y.: ‘Yellow-emitting Sr3SiO5:Ce3+,Li+ phosphor for white-light-emitting diodes and yellow-light-emitting diodes’, Appl. Phys. Lett., 2007, 90, 041906–1–041906-3.
12.
YungK. C., LiemH. and ChoyH. S.: ‘Heat dissipation performance of a high-brightness LED package assembly using high-thermal conductivity filler’, Appl. Opt., 2013, 52, 8484–8493. doi: 10.1364/AO.52.008484
13.
YanB. H., YouJ.-P., TranN. T. and ShiF. G.: 2013 IEEE Int. Symp. on ‘Advanced packaging materials’, Piscataway, NJ, USA, 2013, 274–289.
14.
ShaoY., ShihY.-C., KimG. W. and ShiF. G.: ‘Study of optimal filler size for high performance polymer-filler composite optical reflectors’, Opt. Mater. Express, 2015, 5, 423–429. doi: 10.1364/OME.5.000423
15.
LeeK. H. and LeeS. W. R.: EPTC’06. 8th IEEE on ‘Electronics packaging technology conference’, Singapore, 2006, 379–384.
WangW., WidiyastutiW., OgiT., LenggoroI. W. and OkuyamaK.: ‘Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors’, Chem. Mater., 2007, 19, 1723–1730. doi: 10.1021/cm062887p
18.
LiuZ.-Y., LiC., YuB.-H., WangY.-H. and NiuH.-B.: ‘Effects of YAG:Ce phosphor particle size on luminous flux and angular color uniformity of phosphor-converted white LEDs’, J. Display Technol., 2012, 8, 329–335. doi: 10.1109/JDT.2012.2184835
19.
HsuW.-T., WuW.-H. and LuC.-H.: ‘Synthesis and luminescent properties of nano-sized Y3Al5O12:Eu3+ phosphors’, Mater. Sci. Eng. B, 2003, 104, 40–44. doi: 10.1016/S0921-5107(03)00268-X
20.
YooH. S., JangH. S., ImW. B., KangJ. H. and JeonD. Y.: ‘Particle size control of a monodisperse spherical Y2O3:Eu3+ phosphor and its photoluminescence properties’, J. Mater. Res., 2007, 22, 2017–2024. doi: 10.1557/jmr.2007.0257
21.
TranN. T., YouJ. P. and ShiF. G.: ‘Effect of phosphor particle size on luminous efficacy of phosphor-converted white LED’, J. Lightwave Technol., 2009, 27, 5145–5150. doi: 10.1109/JLT.2009.2028087
22.
JungK. Y., LeeC. H. and KangY. C.: ‘Effect of surface area and crystallite size on luminescent intensity of Y2O3:Eu phosphor prepared by spray pyrolysis’, Mater. Lett., 2005, 59, 2451–2456. doi: 10.1016/j.matlet.2005.03.017
