Poly(ethylene terephthalate) (PET) powder obtained from post-consumer bottles is deposited on carbon steel by using a hot mechanical pressing method. The PET coated steels are aged in weathering chambers by using a xenon lamp for 400 and 1500 h, and using ultraviolet (UV-B) lamps for 400 h. The aged PET coatings are analysed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and the photodegradation mechanism is discussed. The corrosion evaluation of aged PET coated steels is performed by using the electrochemical impedance spectroscopy in a saline medium. FTIR-ATR analysis of the aged coating indicates that the UV-B test chamber is more aggressive to PET coatings than the WO chamber test. After 400 h of weathering aging, PET coated steels exposed in a chamber with the xenon radiation show a higher corrosion resistance than the PET coated steel aged using the UV-B test.
SilvaEFedelMDeflorianF. Properties of post-consumer polyethylene terephthalate coating mechanically deposited on mild steels. Coatings. 2019; 9: 28.
3.
PourhashemSGhasemyERashidiA. A review on application of carbon nanostructures as nanofiller in corrosion-resistant organic coatings. J Coat Technol Res. 2020; 17: 19–55.
4.
TakeshitaYSawadaTHandaT. Influence of air-cooling time on physical properties of thermoplastic polyester powder coatings. Prog Org Coat2012; 75: 584–589.
5.
DuarteLT ME SilvaPe. Production and characterization of thermally sprayed polyethylene terephthalate coatings. Surf Coat Technol. 2004; 182: 261–267.
AwajaFPavelD.Recycling of PET. Eur Polym J2005; 41: 1453–1477.
9.
MasmoudiFFenouillotFMehriA. Characterization and quality assessment of recycled post-consumption poly(ethylene terephthalate) (PET). Environ Sci Pollut Res. 2018; 25: 23307–23314.
10.
LopezMDPernasAIALopezMJA. Assessing changes on poly (ethylene terephthalate) properties after recycling: mechanical recycling in laboratory versus postconsumer recycled material. Mater Chem Phys. 2014; 147: 884–894.
11.
GokAFagerholmCLFrenchRH. Temporal evolution and pathway models of poly (ethylene-terephthalate) degradation under multi-factor accelerated weathering exposures. PloS ONE. 2019; 12 (5): e0177614.
12.
BlaisPDayMWilesDM.Photochemical degradation of poly(ethylene terephthalate). IV. Surface changes. J Appl Polym Sci. 1973; 17: 1895–1907.
13.
WhiteJrTurnbullA.Weathering of polymers: mechanisms of degradation and stabilization, testing strategies and modelling. J Mater Sci. 1994; 29: 584–613.
14.
FerreiraMMLinsVFC.Failure in automobile headlight lenses. Eng Fail Anal. 2019; 104: 844–855.
15.
GokANgendahimanaDKFagerholmCL. Predictive models of poly (ethylene-terephthalate) film degradation under multi-factor accelerated weathering exposures. PloS ONE. 2017; 12: e0177614.
16.
GokAFagerholmCLGordonDA. presented at 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), New Orleans, United States, 14 June–19 June, 2015, p. 1-6.
17.
GordonDAZhanZBruckmanLS.Characterizing the weathering induced degradation of poly (ethylene-terephthalate) using PARAFAC modeling of fluorescence spectra. Polym Degrad Stab. 2019; 161: 85–94.
18.
FechineGJMRabelloMSMaiorRS. Surface characterization of photodegraded poly (ethylene terephthalate). The effect of ultraviolet absorbers. Polymer (Guildf). 2004; 45: 2303–2308.
19.
HouLBiSZhaoH. Electroless plating Cu-Co-P polyalloy on UV/ozonolysis irradiated polyethylene terephthalate film and its corrosion resistance. Appl Surf Sci. 2017; 403: 248–259.
20.
EdgeMWilesRAllenNS. Characterisation of the species responsible for yellowing in melt degraded aromatic polyesters – I: yellowing of poly(ethyleneterephthalate). Polym Degrad Stab1996; 53: 141–151.
21.
DayMWilesDM.Photochemical degradation of poly (ethylene terephthalate). III. Determination of decomposition products and reaction mechanism. J Appl Polym Sci. 1972; 16: 203–215.
22.
ColeKCGuevremontJAjjiA. Characterization of surface orientation in poly (ethylene terephthalate) by front-surface reflection infrared spectroscopy. Appl Spectrosc. 1994; 48: 1513–1521.
23.
ZhuZKelleyMJ.IR spectroscopic investigation of the effect of deep UV irradiation on PET films. Polymer (Guildf). 2005; 46: 8883–8891.
24.
DubelleyFPlanesEBasC. The hygrothermal degradation of PET in laminated multilayer. Eur Polym J2017; 87: 1–13.
25.
BruckmanLSWheelerNRKiddIV. Photovoltaic lifetime and degradation science statistical pathway development: acrylic degradation. In Reliability of Photovoltaic Cells, Modules, components, and Systems VI. Int Soc Opt Photonics. 2013; 8825: 88250D.
26.
HorneFJLiggatJJMcDonaldWA. Photo-oxidation of poly (ethylene terephthalate) films intended for photovoltaic backsheet. J Appl Polym Sci. 2020; 137: 48623.
27.
Al-AzzawiF.Ph.D. Thesis, London Metropolitan University, United Kingdom, 2015.
28.
ChenZHayJNJenkinsMJ.FTIR spectroscopic analysis of poly (ethylene terephthalate) on crystallization. Eur Polym J. 2012; 48: 1586–1610.
29.
LiangCYKrimmS.Infrared spectra of high polymers – Part IX: polyethylene terephthalate. J Mol Spectrosc. 1959; 3: 554–574.
30.
ChaisupakitsinMChairat-UtaiPJarusiripotC.Degradation of polyethylene terephthalate bottles after long sunlight exposure. Songklanakarin J Sci Technol.2019; 41 (2): 259–264.
31.
GardetteJColinATrivisS. Impact of photooxidative degradation on the oxygen permeability of poly(ethyleneterephthalate). Polym Degrad Stab. 2014; 103: 35–41.
32.
SammonCYarwoodJNeilE.An FT–IR study of the effect of hydrolytic degradation on the structure of thin PET films. Polym Degrad Stab. 2000; 67: 149–158.
33.
MassaCACapaccioliSManaritiA. Study of the cold crystallization of poly(ethylene terephthalate) at the air interface by ATR spectroscopy. Eur Polym J. 2014; 60: 286–296.
34.
ScheirsJGardetteJL.Photo-oxidation and photolysis of poly (ethylene naphthalate). Polym Degrad Stab. 1997; 56 (3): 339–350.
35.
TakeshitaYHandaTKudoT.Improvement of weathering resistance for developed thermoplastic polyester powder coating for telecommunication plant. Zairyo-to-Kankyo. 2010; 59 (6): 228–231.
36.
PhilipMAl-AzzawiF.Effects of natural and artificial weathering on the physical properties of recycled poly (ethylene terephthalate). J Polym Environ. 2018; 26 (8): 3139–3148.
37.
AndradyAL.Wavelength sensitivity in polymer photodegradation. In: Pasch H, Andrady AL, Williams RJJ, Narasimhan B, editors. Polymer Analysis Polymer Physics. Berlin, Heidelberg: Springer; 1997. p. 47–94.
38.
KockottD.Natural and artificial weathering of polymers. Polym Degrad Stab. 1989; 25 (2-4): 181–208.
39.
AllenNSEdgeMMohammadianM. Physicochemical aspects of the environmental degradation of poly (ethylene terephthalate). Polym Degrad Stab. 1994; 43 (2): 229–237.
40.
UpasaniPSJainAKSaveN. Chemical recycling of PET flakes into yarn. J Appl Polym Sci. 2012; 123 (1): 520–525.
41.
FellerRL.Accelerated aging: photochemical and thermal aspects – Research in Conservation. Los Angeles (CA): Getty; 1995.
42.
FagerburgD.R.ClaubergH.Photodegradation of poly(ethylene terephthalate) and poly(ethylene/1,4-cyclohexylenedimethylene terephthalate). Scheirs, J, Long TE, editors. Modern Polyesters: chemistry and technology of polyesters and copolyesters. Hoboken, NJ: Wiley; 2004. p. 609–641.
43.
OkuAHuL-CYamadaE.Alkali decomposition of poly(ethylene terephthalate) with sodium hydroxide in nonaqueous ethylene glycol: a study on recycling of terephthalic acid and ethylene glycol. J Appl Polym Sci1997; 63: 595–601.
44.
WanB-ZKaoC-YChengW-H.Kinetics of depolymerization of poly(ethylene terephthalate) in a potassium hydroxide solution. Ind Eng Chem Res. 2001; 40 (2): 509–514.
45.
EdgeMHayesMMohammadianM. Aspects of poly (ethylene terephthalate) degradation for archival life and environmental degradation. Polym Degrad Stab1991; 32: 131–153.
46.
FechineGJMSouto-MaiorRMRabelloMS.Structural changes during photodegradation of poly (ethylene terephthalate). J Mater Sci. 2002; 37: 4979–4984.
47.
PuigaMCabedoaLGraceneaaJJ. Adhesion enhancement of powder coatings on galvanised steel by addition of organo-modified silica particles. Prog Org Coat. 2014; 77: 1309–1315.
48.
IsmailLRameshKMat NorNA. Performance of polyester/epoxy binder coating system – studies on coating resistance, adhesion and differential scanning calorimetry. Pigm Resin Technol. 2016; 45: 158–163.
