The poly(ethylene terephthalate) waste was depolymerized using 1,4-butanediol, and diethylene glycol and the glycolyzed products were used in the preparation of the unsaturated polyester. The composition of the glycolyzed products and the prepared polyester (unsaturated polyester) were investigated in view of their infrared and 1H NMR spectra. Different samples of unsaturated polyester/nanocomposites containing various amounts (1, 3, and 5 wt%) of different nanofillers, namely Nanofil 116, Cloisite 30B, and Laponite RD, were also prepared. The effect of the nanofiller type and content on the morphological structure of the fractured surfaces, thermal, mechanical, and electrical properties was investigated.
SinhaVPatelMRPatelJV. PET waste management by chemical recycling: a review. J Polym Environ2010; 18: 8–25.
2.
FrancescoLM. Handbook of plastics recycling. Shropshire: Rapra Technology, 2002.
3.
IkladiousNE. Recycling of PET. Identification of glycolysis products. J Elastom Plast2000; 32: 140–151.
4.
Abd-El-MessiehSLMansourSHEl-NasharD. Evaluation of polyester resin as a new compatibilizer for SBR/PVC blends. Can J Chem Eng2004; 82: 358–370.
5.
MansourSHIkladiousNE. Depolymerisation of poly(ethylene terephthalate) wastes using 1,4-butanediol and triethylene glycol. Polym Test2002; 21: 497–505.
6.
MansourSHAbd-El-MessiehSLIkladiousNE. Utilization of some oligomers based on poly(ethylene terephthalate) wastes as modifiers for polyvinyl chloride. J Appl Polym Sci2002; 85: 2501–2509.
7.
AttaAM. Epoxy resin based on poly(ethylene terephthalate) waste: synthesis and characterization. Progr Rubber Plast Recycl Tech2003; 19: 17–40.
8.
AttaAMElnagdySIAbdel-RaoufME. Compressive properties and curing behaviour of unsaturated polyester resins in the presence of vinyl ester resins derived from recycled poly(ethylene terephthalate). J Polym Res2005; 12: 373–383.
9.
AttaAMAbdel-RaoufMEElsaeedSM. Curable resins based on recycled poly(ethylene terephthalate) for coating applications. Prog Org Coat2006; 55: 50–59.
10.
AchilliasDSKarayannidisGP. The chemical recycling of PET in the framework of sustainable development. Water Air Soil Pollut Focus2004; 4: 385–396.
11.
RaheemABUyigueL. The conversion of post-consumer polyethylene terephthalate (PET) into a thermosetting polyester resin. Arch Appl Sci Res2010; 2: 240–254.
NiklesDEFarahatMS. New motivation for the depolymerization products derived from poly(ethylene terephthalate) (PET) waste: a review. Macromol Mater Eng2005; 290: 13–30.
14.
SaravariOVessabutrBPimpanV. Synthesis of urethane oils from waste poly(ethylene terephthalate) bottles. J Appl Polym Sci2004; 92: 3040–3045.
15.
KatochSKunduPP. Thermal and mechanical behavior of unsaturated polyester (derived from poly(ethylene terephthalate) waste) and montmorillonite-filled nanocomposites synthesized by in situ polymerization. J Appl Polym Sci2011; 122: 2731–2740.
16.
RaySSOkamotoM. Polymer/layered silicate nano-composites: a review from preparation and processing. Prog Polym Sci2003; 28: 1539–1641.
17.
ThanhTDMaoNDNganNTK. Study structure and properties of nanocomposite material based on unsaturated polyester with clay modified by poly(ethylene oxide). J Nanomater2012; 2012: 841813 (5 pp.).
18.
KaffashiBHonarvarFM. The effect of nanoclay and MWNT on fire-retardancy and mechanical properties of unsaturated polyester resins. J Appl Polym Sci2012; 124: 1154–1159.
19.
AlexandreMDuboisP. Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R Rep2000; 28: 1–63.
20.
XuLLeeLJ. Kinetic analysis and mechanical properties of nanoclay reinforced unsaturated polyester (UP) resins cured at low temperatures. Polym Eng Sci2005; 45: 496–509.
21.
BoikoVPGrishchenkoVK. Determination of hydroxyl groups in polymers. Review. Acta Polym1985; 36: 459–472.
22.
Abd-El-MessiehSLAbd-El-NourKN. Effect of curing time and sulfur content on the dielectric relaxation of styrene butadiene rubber. J Appl Polym Sci2003; 88: 1613–1621.
23.
MandhakiniMChandramohanAVengatesanMR. Synthesis and characterization of linseed vinyl ester fatty amide-modified epoxy layered silicate nanocomposites. High Perform Polym2011; 23: 403–412.
24.
Morote-MartínezVTorregrosa-CoqueRMartín-MartíneJM. Addition of unmodified nanoclay to improve the performance of unsaturated polyester resin coating on natural stone. Int J Adhes Adhes2011; 31: 154–163.
25.
KonwarUDasGKarakN. Mesua ferrea L. seed oil based highly branched polyester/epoxy blends and their nanocomposites. J Appl Polym Sci2011; 121: 1076–1085.
