In order to ensure structural integrity in such applications of composites materials, it is important to understand the material behaviour under mechanical loadings and predict correctly its responses. In this paper, the authors perform several three-point bending tests on a typical stacking sequences used in composite structures. Inspection techniques involving a digital microscope are used to study the successive failures and the effect of the thickness ratio (l h−1) on nonlinear behaviour. It was found that successive failures depend on the stacking sequence where the orthogonal sequences have a significant effect on the delamination between the plies. To describe the nonlinear behaviour observed, Von-Karman's large deflection theory and classical plate theory (CPT) are employed in the formulation of analytical modelling used in this work. The Riccati equation obtained leads to predict the experimental nonlinear curves with good accuracy. However, a slight dispersion between the experimental and analytical curves less than 11% was observed at large deflection.
GulshanMNA, ChakrabartiA, SheikhAH.Analysis of functionally graded plates using higher order shear deformation theory. Appl Math Model. 2013; 37: 8484–8494.
2.
OrificiAC, HerszbergI, ThomsonRS.Review of methodologies for composite material modelling incorporating failure. Compos Struct. 2008; 86: 194–210.
3.
PinhoST, DavilaCG, CamanhoPP, Failure models and criteria for FRP under in-plane or three-dimensional stress states including shear non-linearity. NASA/TM-2003-213530. 2005.
4.
TranLV, FerreiraAJM, Nguyen-XuanH.Isogeometric analysis of functionallygraded plates using higher-order shear deformation theory. Compos B Eng. 2013; 51: 368–383.
5.
YangJ, LiewKM, KitipornchaiS.Imperfection sensitivity of the post-buckling behavior of higher-order shear deformable functionally graded plates. Int J Solids Struct. 2006; 43 ( 5247 ): 5247–5266.
6.
ThaiHT, KimSE.A review of theories for the modeling and analysis of functionally graded plates and shells. J Compos Struct. 2015; 128: 70–86.
7.
Aklilu1G, Adali1bS, BrightG.Experimental characterization of hybrid and non-hybrid polymer composites at elevated temperatures. Int J Eng Res Africa. 2018; 36: 37–52.
8.
HerráezM, PichlerN, PappasGA, Experiments and numerical modelling on angle-Ply laminates under remote mode II loading. Compos Part A. 2020; 134: 105886.
9.
JiaX, XiaZ, GuB.Numerical analyses of 3D orthogonal woven composite under three-point bending from multi-scale microstructure approach. Comput Mater Sci. 2013; 79: 468–477.
10.
ChowdhuryNT, WangJ, ChiuWK, Predicting matrix failure in composite structures using a hybrid failure criterion. J Compos Struct. 2016; 137: 148–158.
11.
Rahimian KoloorSS, KarimzadehA, YidrisN, An energy-based concept for yielding of multidirectional FRP composite structures using a mesoscale lamina damage model. Polymers. 2020; 12: 157.
12.
EchaabiJ, TrochuF, PhamXT, Theoretical and experimental investigation of failure and damage progression of graphite-epoxy composites in flexural bending test. J Reinf Plast Compos. 1996; 15: 740–755.
13.
DashP, SinghBN.Geometrically nonlinear bending analysis of laminated composite plate. Commun Nonlinear Sci Numer Simul. 2010; 15: 3170–3181.
14.
Huu-TaiT, Dong-HoC.A simple first-order shear deformation theory for laminated composite plates. Compos Struct. 2013; 106: 754–763.
15.
DraicheK, BousahlaAA, TounsiA, Static analysis of laminated reinforced composite plates using a simple first order shear deformation theory. Comput Concrete. 2019; 24: 369–378.
16.
ZhangYX, CheungYK.Geometric nonlinear analysis of thin plates by a refined nonlinear non-conforming triangular plate element. Thin-Walled Struct. 2003; 41: 403–418.
17.
TranLV, LeeJ, Nguyen-VanH, Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory. Int J Non Linear Mech. 2015; 72: 42–52.
18.
Nguyen-VanH, Nguyen-HoaiN, Chau-DinhT, Geometrically nonlinear analysis of composite plates and shells via a quadrilateral element with good coarse-mesh accuracy. Compos Struct. 2014; 112: 327–338.
19.
BenbourasY, MaziriA, MallilE, A nonlinear analytical model for symmetric laminated. Inter J Technol. 2017; 8: 437–447.
20.
BenbourasY, BellahkimM, MaziriA, Nonlinear modeling of the failure of a graphite epoxy under a three-point bending test. Polym Polym Compos. 2020; 28: 119–139.
21.
IrhiraneEH, AbousalehM, EchaabiJ, Modeling and simulation of the rupture and rigidity degradation of a graphite epoxy in three points bending test. ASME. J Eng Mater Technol. 2010; 132: 031013–031013-8.
22.
IrhiraneEH. Modélisation et analyse de l'endommagement et de la résistance des matériaux composites à fibre longues [PhD thesis]. Casablanca: National School of Electricity and Mechanics; 2007.
23.
IrhiraneEH, EchaabiJ, AboussalehM, Matrix and fibre stiffness degradation of a quasi-isotrope graphite epoxy laminate under Flexural Bending test. J Reinf Plast Compos. 2009; 28: 201–223.
24.
Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials 1. ASTM D790, Am. Soc. Test. Mater., 1997.
25.
ABC composites Standard Prepreg Range & Technical data sheets NT-FTP-022 (T700). index 3, 2016.
