In this paper, we examined glass transition, a very important parameter that determines the properties and applications of epoxy resins by the innovative approach of kinetic study. The effect of thermoplastic filler Polyethylene Glycol-1000 (PEG-1000) on the kinetics of glass transition temperature of epoxy was analysed by varying the filler loadings and the heating rates. The differential scanning calorimetry curves were plotted at heating rates of 5, 10, 15 and 20°C, respectively and the kinetics of glass transition by varying the heat rates was investigated. Kissinger and Moynihan methods were employed to analyse the glass transition kinetics. The changes in glass transition have been interpreted remarkably with the constrained polymer region of the systems. The improvement in toughness of about ≈ 213% was obtained compared to the neat epoxy with an addition of about 1 wt-% of PEG loading. The toughening mechanisms were elucidated by analysing the scanning electron microscopic images of fractured samples.
MirmohseniA, ZavarehS.Modeling and optimization of a new impact-toughened epoxy nanocomposite using response surface methodology. J Polym Res. 2011; 18 ( 4 ): 509–517. doi: 10.1007/s10965-010-9443-z
DaelemansL, Van PaepegemW, D'hoogeDR, Excellent nanofiber adhesion for hybrid polymer materials with high toughness based on matrix interdiffusion during chemical conversion. Adv Funct Mater. 2019; 29 ( 8 ): 1807434. doi: 10.1002/adfm.201970051
5.
GuH, MaC, LiangC, A low loading of grafted thermoplastic polystyrene strengthens and toughens transparent epoxy composites. J Mater Chem C. 2017; 5 ( 17 ): 4275–4285. doi: 10.1039/C7TC00437K
6.
ThomasR, YumeiD, YuelongH, Miscibility, morphology, thermal, and mechanical properties of a DGEBA based epoxy resin toughened with a liquid rubber. Polymer (Guildf). 2008; 49 ( 1 ): 278–294. doi: 10.1016/j.polymer.2007.11.030
7.
DeanJM, GrubbsRB, SaadW, Mechanical properties of block copolymer vesicle and micelle modified epoxies. J Polym Sci Part B Polym Phys. 2003; 41 ( 20 ): 2444–2456. doi: 10.1002/polb.10595
8.
YangG, ZhengB, YangJ, Preparation and cryogenic mechanical properties of epoxy resins modified by poly (ethersulfone). J Polym Sci Part A Polym Chem. 2008; 46 ( 2 ): 612–624. doi: 10.1002/pola.22409
9.
WangX, ZongL, HanJ, Toughening and reinforcing of benzoxazine resins using a new hyperbranched polyether epoxy as a non-phase-separation modifier. Polymer (Guildf). 2017; 121: 217–227. doi: 10.1016/j.polymer.2017.05.069
10.
ZavarehS, SamandariG.Polyethylene glycol as an epoxy modifier with extremely high toughening effect: Formation of nanoblend morphology. Polym Eng Sci. 2014; 54 ( 8 ): 1833–1838. doi: 10.1002/pen.23733
11.
GuzelG, DeveciH.Physico-mechanical, thermal, and coating properties of composite materials prepared with epoxy resin/steel slag. Polym Compos. 2015; 38 ( 9 ): 1974–1981. doi: 10.1002/pc.23768.
12.
FengQ, YangJ, LiuY, Simultaneously enhanced cryogenic tensile strength, ductility and impact resistance of epoxy resins by polyethylene glycol. J Mater Sci Technol. 2014; 30 ( 1 ): 90–96. doi: 10.1016/j.jmst.2013.08.016
13.
QinC, ShenJ, HuY, Miscibility, crystallization behavior and specific intermolecular interactions in thermosetting polymer blends of novolac epoxy resin and polyethylene glycol. Polym Eng Sci. 2008; 48 ( 3 ): 556–563. doi: 10.1002/pen.20966
14.
ZhangB, ZhangH, YouY, Application of a series of novel chain-extended ureas as latent-curing agents and toughening modifiers for epoxy resin. J Appl Polym Sci. 1998; 69 ( 2 ): 339–347. doi: 10.1002/(SICI)1097-4628(19980711)69:2<339::AID-APP15>3.0.CO;2-R
MoynihanCT, EastealAJ, WilderJ, Dependence of the glass transition temperature on heating and cooling rate. J Phys Chem. 1974; 78 ( 26 ): 2673–2677. doi: 10.1021/j100619a008
20.
PatelAT, PratapA.Study of glass transition kinetics for Co66Si12B16Fe4Mo2 metallic glass. In: International Journal of Modern Physics: Conference Series. World Scientific; 2013. p. 321–326.
21.
KhaskovMA.Extension of the time–temperature–transformation diagram taking into account thermal properties of components for optimizing the curing of polymer matrix composites. Russ J Appl Chem. 2016; 89 ( 4 ): 622–630. doi: 10.1134/S1070427216040169
22.
GuptaN, DalviA, BhardwajS, Crystallization and glass transition kinetics in Cu+ ion substituted Cux–Ag1–xI–Ag2O–V2O5 superionic glasses. J Non Cryst Solids. 2011; 357 ( 7 ): 1811–1815. doi: 10.1016/j.jnoncrysol.2011.02.021
BlaineRL, KissingerHE.Homer Kissinger and the Kissinger equation. Thermochim Acta. 2012; 540: 1–6. doi: 10.1016/j.tca.2012.04.008
25.
MoynihanCT, EastealAJ, De BOLTMA, Dependence of the fictive temperature of glass on cooling rate. J Am Ceram Soc. 1976; 59 ( 1–2 ): 12–16. doi: 10.1111/j.1151-2916.1976.tb09376.x
26.
MoynihanCT, MacedoPB, MontroseCJ, Structural relaxation in vitreous materials. Ann N Y Acad Sci. 1976; 279 ( 1 ): 15–35. doi: 10.1111/j.1749-6632.1976.tb39688.x
