This work reports the characterisation of cassava biopolymers. Moreover, the effects of processing temperature on the tensile properties and phase morphology of cassava biopolymers were investigated. Eight different temperatures were selected as processing temperatures in sample preparation of the cassava biopolymers. Variance analysis justifies that 165 and 170°C are the optimum processing temperatures in producing maximum tensile properties. The present study reveals that the range of processing temperatures for cassava biopolymer was relatively lower as compared to the majority of the petroleum-based polymer. However, its low processing temperature makes this biopolymer has enormous potential in the development of fully biodegradable composites.
SiregarJP, SapuanS, RahmanM, The effect of alkali treatment on the mechanical properties of short pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. J Food Agric Environ. 2010;8(2):1103–1108.
2.
ZhongJ, LiH, YuJ, Effects of natural fiber surface modification on mechanical properties of poly (lactic acid)(PLA)/sweet sorghum fiber composites. Polym Plast Technol Eng. 2011;50(15):1583–1589. doi: 10.1080/03602559.2011.557817
ASTM. Astm D5488-94de1 standard terminology of environmental labeling of packaging materials and packages (withdrawn 2002). West Conshohocken (PA): ASTM International.
7.
AvérousL.Biodegradable multiphase systems based on plasticized starch: a review. J Macromol Sci C Polym Rev. 2004;44(3):231–274. doi: 10.1081/MC-200029326
GarlottaD.A literature review of poly(lactic acis). J Polym Environ. 2001;9(2):22. doi: 10.1023/A:1020200822435
12.
MartinO, AverousL.Poly (lactic acid): plasticization and properties of biodegradable multiphase systems. Polymer (Guildf). 2001;42(14):6209–6219. doi: 10.1016/S0032-3861(01)00086-6
13.
VinkET, RabagoKR, GlassnerDA, Applications of life cycle assessment to NatureWorks™ polylactide (PLA) production. Polym Degrad Stab. 2003;80(3):403–419. doi: 10.1016/S0141-3910(02)00372-5
14.
ThengD, El MansouriN-E, Arbat PujolràsG, Fiberboards made from corn stalk thermomechanical pulp and kraft lignin as a green adhesive. Bioresources. 2017;12(2):2379–2393. doi: 10.15376/biores.12.2.2379-2393
15.
GeorgeJ, BhagawanS, ThomasS.Thermogravimetric and dynamic mechanical thermal analysis of pineapple fibre reinforced polyethylene composites. J Therm Anal. 1996;47(4):1121–1140. doi: 10.1007/BF01979452
16.
JaafarJ, SiregarJP, OumerAN, Experimental investigation on performance of short pineapple leaf fiber reinforced tapioca biopolymer composites. Bioresources. 2018;13(3):6341–6355.
17.
GeorgeJ, JanardhanR, AnandJ, Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites. Polymer (Guildf). 1996;37(24):5421–5431. doi: 10.1016/S0032-3861(96)00386-2
18.
KhondkerOA, IshiakuUS, NakaiA, Fabrication mechanical properties of unidirectional jute/PP composites using jute yarns by film stacking method. J Polym Environ. 2005;13(2):115–126. doi: 10.1007/s10924-005-2943-y
19.
SuR, WangK, ZhangQ, Effect of melt temperature on the phase morphology, thermal behavior and mechanical properties of injection-molded PP/LLDPE blends. Chin J Polym Sci. 2010;28(2):249–255. doi: 10.1007/s10118-010-9013-1
20.
SiregarJP, SapuanS, RahmanMZA, Thermogravimetric analysis (TGA) and differential scanning calometric (DSC) analysis of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composites. Pertanika J Sci Technol. 2011;19(1):161–170.
21.
ASTM. Astm D 3418-03 standard test method for transition temperatures of polymers by differential scanning calorimet. West Conshohocken (PA): ASTM International.
22.
ShahAUM, SultanMTH, CardonaF, Thermal analysis of bamboo fibre and its composites. Bioresources. 2017;12(2):2394–2406.
23.
DuY, WuT, YanN, Fabrication and characterization of fully biodegradable natural fiber-reinforced poly (lactic acid) composites. Comp B Eng. 2014;56:717–723. doi: 10.1016/j.compositesb.2013.09.012
24.
LiuW, MisraM, AskelandP, ‘Green‘composites from soy based plastic and pineapple leaf fiber: fabrication and properties evaluation. Polymer (Guildf). 2005;46(8):2710–2721. doi: 10.1016/j.polymer.2005.01.027
25.
AribR, SapuanS, AhmadM, Mechanical properties of pineapple leaf fibre reinforced polypropylene composites. Mater Des. 2006;27(5):391–396. doi: 10.1016/j.matdes.2004.11.009
26.
NanthayaK, TaweechaiA.A new approach to ‘greening’ plastic composites using pineapple leaf waste for performance and cost effectiveness. Mater Des. 2014;55:292–299. doi: 10.1016/j.matdes.2013.10.005
27.
SiregarJP.Effect of selected treatment on properties of pineapple leaf fibre reinforced high impact polystyrene composites [thesis]. Doctor of Philosophy(Universiti Putra Malaysia); 2011.
28.
ASTM. Astm D 638–03 standard test method for tensile properties of plastics. West Conshohocken (PA): ASTM International.
29.
JumaidinR, SapuanSM, JawaidM, Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm starch/agar hybrid composites. Int J Biol Macromol. 2017;97:606–615. doi: 10.1016/j.ijbiomac.2017.01.079
30.
Lomelí-RamírezMG, Barrios-GuzmánAJ, García-EnriquezS, Chemical and mechanical evaluation of bio-composites based on thermoplastic starch and wood particles prepared by thermal compression. Bioresources. 2014;9(2):2960–2974. doi: 10.15376/biores.9.2.2960-2974
31.
NadleneR, SapuanS, JawaidM, The effects of chemical treatment on the structural and thermal, physical, and mechanical and morphological properties of roselle fiber-reinforced vinyl ester composites. Polym Compos. 2016;39(1):274–287. doi: 10.1002/pc.23927
32.
MutungiC, PassauerL, OnyangoC, Debranched cassava starch crystallinity determination by Raman spectroscopy: correlation of features in Raman spectra with X-ray diffraction and 13 C CP/MAS NMR spectroscopy. Carbohydr Polym. 2012;87(1):598–606. doi: 10.1016/j.carbpol.2011.08.032
33.
PengP, SheD.Isolation, structural characterization, and potential applications of hemicelluloses from bamboo: a review. Carbohydr Polym. 2014;112:701–720. doi: 10.1016/j.carbpol.2014.06.068
34.
JumaidinR, SapuanSM, JawaidM, Effect of seaweed on mechanical, thermal, and biodegradation properties of thermoplastic sugar palm starch/agar composites. Int J Biol Macromol. 2017;99:265–273. doi: 10.1016/j.ijbiomac.2017.02.092
LimMH, WuH, ReidDS.The effect of starch gelatinization and solute concentrations on Tg? of starch model system. J Sci Food Agric. 2000;80(12):1757–1762. doi: 10.1002/1097-0010(20000915)80:12<1757::AID-JSFA703>3.0.CO;2-Y
38.
BijarimiM, PiahM, SahrimA, Mechanical, thermal and morphological properties of PLA/PP melt blends. 2012.
CallisterWDJr, RethwischDG.Fundamentals of materials science and engineering: an integrated approach. Hoboken (New Jersey) United State: John Wiley & Sons; 2012.
MengelogluF, KarakusK.Thermal degradation, mechanical properties and morphology of wheat straw flour filled recycled thermoplastic composites. Sensors. 2008;8(1):500–519. doi: 10.3390/s8010500
45.
StagnaroP, ManciniG, PiccininiA, Novel ethylene/norbornene copolymers as nonreleasing antioxidants for food-contact polyolefinic materials. J Polym Sci B Polym Phys. 2013;51(13):1007–1016. doi: 10.1002/polb.23304
46.
JamiluddinJ, SiregarJP, SulaimanA, Study on properties of tapioca resin polymer. Int J Automot Mech Eng. 2016;13(1):3178–3189. doi: 10.15282/ijame.13.1.2016.5.0265
47.
KuH, WangH, PattarachaiyakoopN, A review on the tensile properties of natural fiber reinforced polymer composites. Compos B Eng. 2011;42(4):856–873. doi: 10.1016/j.compositesb.2011.01.010
MolitorisH, MossS, De KoningG, Scanning electron microscopy of polyhydroxyalkanoate degradation by bacteria. Appl Microbiol Biotechnol. 1996;46(5):570–579. doi: 10.1007/s002530050863
50.
GilbertM, HybartF.Effect of chemical structure on crystallization rates and melting of polymers: part 1. aromatic polyesters. Polymer (Guildf). 1972;13(7):327–332. doi: 10.1016/0032-3861(72)90099-7
51.
BroutmanL, McGarryF.Fracture surface work measurements on glassy polymers by a cleavage technique. I. Effects of temperature. J Appl Polym Sci. 1965;9(2):589–608. doi: 10.1002/app.1965.070090221
52.
ŻuchowskaD, StellerR, MeissnerW.Structure and properties of degradable polyolefin-starch blends. Polym Degrad Stab. 1998;60(2–3):471–480. doi: 10.1016/S0141-3910(97)00110-9
