Dissimilar friction stir welding was conducted on the combination of pure Ti and carbon fibre reinforced plastic. The weld interface microstructure and mechanical properties of the obtained joints were systematically investigated. Before welding, a surface treatment was performed on the Ti surface using a silane coupling agent. As a result, the silane coupling agent treatment helped to fabricate the sound dissimilar Ti/CFRP joint. The dissimilar Ti/CFRP joints obtained at the interface temperature between the melting point of the CFRP and thermal decomposition point of the CFRP showed superior tensile-shear strength due to the formation of the sufficient reaction between the surface-modified Ti and CFRP and the suppression of welding defect formation in the CFRP near the weld interface.
LiuFC, LiaoJ, NakataK.Joining of metal to plastic using friction lap welding. Mater Des. 2014; 54:236–244. doi: 10.1016/j.matdes.2013.08.056
2.
JungKW, KawahitoY, KatayamaS.Laser direct joining of carbon fibre reinforced plastic to stainless steel. Sci Technol Weld Joining. 2011; 16:676–680. doi: 10.1179/1362171811Y.0000000060
3.
JungKW, KawahitoY, TakahashiM, Laser direct joining of carbon fiber reinforced plastic to zinc-coated steel. Mater Des. 2013; 47:179–188. doi: 10.1016/j.matdes.2012.12.015
4.
KonchakovaN, BalleF, BarthFJ, Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints. Comput Mater Sci. 2010; 50:184–190. doi: 10.1016/j.commatsci.2010.07.024
5.
BalleF, WagnerG, EiflerD.Ultrasonic metal welding of aluminum sheets to carbon fibre reinforced thermoplastic composites. Adv Eng Mater. 2009; 11:35–39. doi: 10.1002/adem.200800271
6.
Amancio-FilhoST, BuenoC, dos SantosJF, On the feasibility of friction spot joining in magnesium/fiber-reinforced polymer composite hybrid structures. Mater Sci Eng A. 2011; 528:3841–3848. doi: 10.1016/j.msea.2011.01.085
7.
YusofF, MiyashitaY, SeoN, Utilising friction spot joining for dissimilar joint between aluminium alloy (A5052) and polyethylene terephthalate. Sci Technol Weld Joining. 2011; 17:544–549. doi: 10.1179/136217112x13408696326530
8.
KashaevN, VentzkeV, RiekehrS, Assessment of alternative joining techniques for Ti–6Al–4V/CFRP hybrid joints regarding tensile and fatigue strength. Mater Des. 2015; 81:73–81. doi: 10.1016/j.matdes.2015.04.051
9.
NagatsukaK, YoshidaS, TsuchiyaA, Direct joining of carbon-fiber-reinforced plastic to an aluminum alloy using friction lap joining. Compos Part B. 2015; 73:82–88. doi: 10.1016/j.compositesb.2014.12.029
10.
NagatsukaK, KitagawaD, YamaokaH, Friction lap joining of thermoplastic materials to carbon steel. ISIJ Int. 2016; 56:1226–1231. 181–186. doi: 10.2355/isijinternational.ISIJINT-2016-042
11.
PalaniS, HackT, DeconinckJ, Validation of predictive model for galvanic corrosion under thin electrolyte layers: an application to aluminium 2024-CFRP material combination. Corros Sci. 2014; 78:89–100. doi: 10.1016/j.corsci.2013.09.003
12.
MaterneT.Organosilane technology in coating applications: review and perspectives, Form No. 26-1402A-01. Midland (MI): Dow Corning Corporation; 2012; p. 1–16.
13.
XieY, HillCAS, XiaoZ, Silane coupling agents used for natural fiber/polymer composites: a review. Compos Part A. 2010; 41:806–819. doi: 10.1016/j.compositesa.2010.03.005
14.
WangK, YoungB, SmithST.Mechanical properties of pultruded carbon fibre-reinforced polymer (CFRP) plates at elevated temperatures. Eng Struct. 2011; 33:2154–2161. doi: 10.1016/j.engstruct.2011.03.006
15.
WangYC, WongPMH, KodurV.An experimental study of the mechanical properties of fibre reinforced polymer (FRP) and steel reinforcing bars at elevated temperatures. Compos Struct. 2007; 80:131–140. doi: 10.1016/j.compstruct.2006.04.069
16.
TanX, ZhangJ, ShanJ, Characteristics and formation mechanism of porosities in CFRP during laser joining of CFRP and steel. Compos Part B. 2015; 70:35–43. doi: 10.1016/j.compositesb.2014.10.023
17.
XuM, LiuB, ZhaoY, Direct joining of thermoplastic ABS to aluminum alloy 6061-T6 using friction lap welding. Sci Technol Weld Joining. 2020; 25:391–397. doi: 10.1080/13621718.2020.1719304
