RETRACTED: Influence of rotation speeds on microstructure and mechanical properties of welded joints of friction stir welded AA2014-T6/AA6061-T6 alloys
Restricted accessRetractionFirst published online October, 2023
RETRACTED: Influence of rotation speeds on microstructure and mechanical properties of welded joints of friction stir welded AA2014-T6/AA6061-T6 alloys
ArivarasuMManikandanMVinothJ, et al.The effect of post-weld heat treatment on microstructure and tensile properties of alloy C-276 welded joints fabricated by pulsed current gas tungsten arc welding. Cienc e Tecnol dos Mater2017; 29: 39–45.
2.
RamachandranKKMuruganNShashi KumarS. Effect of tool axis offset and geometry of tool pin profile on the characteristics of friction stir welded dissimilar joints of aluminum alloy AA5052 and HSLA steel. Mater Sci Eng A2015; 629: 219–233.
3.
AhnB-WKimJ-HHamadK, et al.Microstructure and mechanical properties of a B4C particle-reinforced Cu matrix composite fabricated by friction stir welding. J Alloys Compd2017; 693: 688–691.
4.
DialamiNChiumentiMCerveraM, et al.Enhanced friction model for friction stir welding (FSW) analysis: simulation and experimental validation. Int J Mech Sci2017; 133: 555–567.
5.
DialamiNCerverMChiumentiM, et al.A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces in friction stir welding. Int J Mech Sci2017; 122: 215–227.
6.
Devendranath RamkumarKHarsha MohanTPandeyR, et al.Investigations on the structure – property relationships of PCGTA weld involving inconel 718 and AISI 430. Cienc e Tecnol dos Mater2017; 29: 28–38.
7.
HuZLWangXSPangQP, et al.The effect of post-processing on tensile property and microstructure evolution of friction stir welding aluminum alloy joint. Mater Charact2015; 99: 180–187.
8.
AvalHJ. Microstructure and residual stress distributions in friction stir welding of dissimilar aluminium alloys. Mater Des2015; 87: 405–413.
9.
KalaiselvanKMuruganN. Role of friction stir welding parameters on tensile strength of AA6061–B4C composite joints. Trans Nonferrous Met Soc China2013; 23: 616–624.
10.
KalaiselvanKDinaharanIMuruganN. Characterization of friction stir welded boron carbide particulate reinforced AA6061 aluminum alloy stir cast composite. Mater Des2015; 55: 176–182.
11.
TruebaLTorresMJohannesL, et al.Process optimization in the self-reacting friction stir welding of aluminum 6061-T6. Int J Mater Form2017; 11: 1–12.
12.
MalardBGeuserFDDeschampsA. Microstructure distribution in an AA2050 T3 4 friction stirs weld and its evolution during post-welding heat treatment. Acta Mater2015; 101: 90–100.
13.
PouraliMAbdollah-zadehASaeidT, et al.Influence of welding parameters on intermetallic compounds formation in dissimilar steel/aluminum friction stir welds. J Alloys Compd2017; 715: 1–8.
14.
MartinezNKumarNMishraRS, et al.Microstructural variation due to heat gradient of a thick friction stir welded aluminum 7449 alloy. J Alloys Compd2017; 713: 51–63.
15.
MatthieuDAubertISaintierN, et al.Mechanical behavior of periodical microstructure induced by friction stirs welding on Al–Cu–Li 2050 alloy. Mater Sci Eng A2015; 644: 69–75.
16.
JenarthananMPVarun VarmaCKrishna ManoharV. Impact of friction stir welding (FSW) process parameters on tensile strength during dissimilar welds of AA2014 and AA6061. Mater Today: Proc2018; 5: 14384–14391.
17.
RaturiMGargABhattacharyaA. Tensile strength and failure of dissimilar friction stir welded joints between 6061-T6 and 2014-T6 aluminum alloy. Procedia Struc Inte2019; 17: 495–502.
18.
KumarPSMothukuriSc. Effect of tool pin geometry on FSW dissimilar aluminum alloys - (AA5083 & AA6061). Mater Today: Proc2021; 39: 472–4773.
19.
ShrivasSAgrawalGKNagpalS, et al.Dissimilar aluminum alloy joint strength is effected by heat addition in friction stir welding (FSW). Mater Today: Proc2021; 44: 1472–1477.
20.
JabraeiliRJafarianHRKhajehR, et al.Effect of FSW process parameters on microstructure and mechanical properties of the dissimilar AA2024 Al alloy and 304 stainless steel joints. Mater Sci Eng A2021; 814: 140981.
21.
Ragu NathanSBalasubramanianVMalarvizhiS, et al.An investigation on metallurgical characteristics of tungsten based tool materials used in friction stir welding of naval grade high strength low alloy steels. Int J Refract Hard Met2016; 56: 18–26.
22.
RamkumarTSelvakumarMNarayanasamyN, et al.Studies on the structural property, mechanical relationships and corrosion behaviour of inconel 718 and SS 316L dissimilar joints by TIG welding without using activated flux. J Manuf Process2017; 30: 290–298.
23.
RambabuGBalajiNaikDVenkataRaoCH, et al.Optimization of friction stir welding parameters for improved corrosion resistance of AA2219 aluminum alloy joints. Def Techno2015; 11: 330–337.
24.
SabariSMalarvizhiSBalasubramanianV. Influences of tool traverse speed on tensile properties of air cooled and water cooled friction stir welded AA2519-T87 aluminium alloy joints. J Mater Process Technol2016; 237: 286–300.
25.
YoonSUejiRFujiiH. Effect of initial microstructure on Ti–6Al–4 V joint by friction stir welding. Mater Des2010; 88: 1269–1276.
26.
SarkarRPalTShomeM. Material flow and intermixing during friction stir spot welding of steel. J Mater Process Technol2016; 227: 96–109.
27.
SteuwerAPeel MatthewJWithers PhilipJ. Dissimilar friction stir welds in AA5083–AA6082: the effect of process parameters on residual stress. Mater Sci Eng A2006; 441: 187–196.
28.
MiuraTUejiRFujiiH, et al.Stabilization of austenite in low carbon Cr–Mo steel by high speed deformation during friction stir welding. Mater Des2016; 90: 915–921.
29.
TanYBWangXMMaM, et al.A study on microstructure and mechanical properties of AA 3003 aluminum alloy joints by underwater friction stir welding. Mater Charact2017; 127: 41–52.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
