Vehicle body structures are increasingly utilising multi-materials designs with advanced high strength steels (AHSS) and aluminium alloys. A robust process for joining aluminium alloys to AHSS based on resistance spot welding (RSW) is essential to widespread application of such bi-metallic structures in fuel-efficient vehicles. In this study, ultrasonic plus RSW was applied to join AA6022 to Zn-coated dual-phase steel DP980. During solid-state ultrasonic spot welding, an interface structure comprising multilayer, Al–Zn and Zn–Fe intermetallics formed due to alloying of aluminium with steel coating. Such structure was subsequently melted into the aluminium nugget, and new Al–Fe intermetallics formed during RSW. Ultrasonic plus resistance spot-welded joints had superior fracture energy than direct resistance spot-welded joints.
MeschutG, JanzenV, OlfermannT.Innovative and highly productive joining technologies for multi-material lightweight car body structures. J Mater Eng Perform. 2014; 23:1515–1523. doi: 10.1007/s11665-014-0962-3
2.
SunX, StephensEV, KhaleelMA, Resistance spot welding of aluminum alloy to steel with transition material – from process to performance – part 1: experimental study. Weld J. 2004; 83:188S–195S.
3.
Mira-AguiarT, GalvãoI, LeitãoC, Analysis of weld defects in similar and dissimilar resistance seam welding of aluminium, zinc and galvanised steel. Sci Technol Weld Join. 2015; 20:409–417. doi: 10.1179/1362171815Y.0000000031
4.
LinJ-Y, NambuS, KosekiT.Evolution of bonding interface during ultrasonic welding between steel and aluminium alloy. Sci Technol Weld Join. 2019; 24:83–91. DOI:10.0.4.56/13621718.2018.1491376
5.
WangT, SidharH, MishraRS, Friction stir scribe welding technique for dissimilar joining of aluminium and galvanised steel. Sci Technol Weld Join. 2018; 23:249–255. DOI:10.0.4.56/13621718.2017.1381460
6.
LiuB, VivekA, PresleyM, Dissimilar impact welding of 6111-T4, 5052-H32 aluminum alloys to 22MnB5, DP980 steels and the structure–property relationship of a strongly bonded interface. Metall Mater Trans A Phys Metall Mater Sci. 2018; 49:899–907. doi: 10.1007/s11661-017-4429-7
7.
OliveiraJP, PonderK, BrizesE, Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels. J Mater Process Technol. 2019; 273:116192. doi: 10.1016/j.jmatprotec.2019.04.018
8.
LiD, ChrysanthouA, PatelI, Self-piercing riveting – a review. Int J Adv Manuf Technol. 2017; 92:1777–1824. doi: 10.1007/s00170-017-0156-x
9.
ChenN, WangM, WangH, Microstructural and mechanical evolution of Al / steel interface with Fe2Al5 growth in resistance spot welding of aluminum to steel. J Manuf Process. 2018; 34:424–434. doi: 10.1016/j.jmapro.2018.06.024
10.
MiyamotoK, NakagawaS, SugiC, Dissimilar joining of aluminum alloy and steel by resistance spot welding. SAE Int J Mater Manuf. 2009; 2:58–67. Available from:http://papers.sae.org/2009-01-0034/ doi: 10.4271/2009-01-0034
11.
ShiL, KangJ, Shalchi-AmirkhizB, Effect of coating type on microstructure and mechanical behavior of resistance spot welds of thin X626 aluminum sheet to low carbon steel. J Mater Process Technol. 2019; 264:438–447. doi: 10.1016/j.jmatprotec.2018.09.025
12.
ZhangW, SunD, HanL, Interfacial microstructure and mechanical property of resistance spot welded joint of high strength steel and aluminium alloy with 4047 AlSi12 interlayer. Mater Des. 2014; 57:186–194. doi: 10.1016/j.matdes.2013.12.045
13.
LuY, MaytonE, SongH, Dissimilar metal joining of aluminum to steel by ultrasonic plus resistance spot welding – microstructure and mechanical properties. Mater Des. 2019; 165. doi: 10.1016/j.matdes.2019.107585
14.
LuY, ZhangK, TranJ, Optimizing ultrasonic plus resistance spot welding for dissimilar metal joining. Weld J. 2019; 98:273S–282S. https://doi.org/10.29391/2019.98.024
15.
MarderAR.The metallurgy of zinc-coated steel. Prog Mater Sci. 2000; 45:119–271. Available from:https://www.taylorfrancis.com/books/E-EPCS doi: 10.1016/S0079-6425(98)00006-1
16.
GunduzI, AndoT, ShattuckE, Enhanced diffusion and phase transformations during ultrasonic welding of zinc and aluminum. Scr Mater. 2005; 52:939–943. Available from:http://linkinghub.elsevier.com/retrieve/pii/S1359646204007067 doi: 10.1016/j.scriptamat.2004.12.015
17.
HaddadiF, Abu-FarhaF.Microstructural and mechanical performance of aluminium to steel high power ultrasonic spot welding. J Mater Process Technol. 2015; 225:262–274. Available from:http://linkinghub.elsevier.com/retrieve/pii/S0924013615300297 doi: 10.1016/j.jmatprotec.2015.06.019
18.
QiuR, IwamotoC, SatonakaS.Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate. J Mater Process Technol. 2009; 209:4186–4193. doi: 10.1016/j.jmatprotec.2008.11.003
19.
ZhangW, SunD, HanL, Characterization of intermetallic compounds in dissimilar material resistance spot welded joint of high strength steel and aluminum alloy. ISIJ Int. 2011; 51:1870–1877. doi: 10.2355/isijinternational.51.1870
20.
WanZ, WangHP, WangM, Numerical simulation of resistance spot welding of Al to zinc-coated steel with improved representation of contact interactions. Int J Heat Mass Transf. 2016; 101:749–763. doi: 10.1016/j.ijheatmasstransfer.2016.05.023
ZhangWH, QiuXM, SunDQ, Effects of resistance spot welding parameters on microstructures and mechanical properties of dissimilar material joints of galvanised high strength steel and aluminium alloy. Sci Technol Weld Join. 2011; 16:153–161. doi: 10.1179/1362171810Y.0000000009
23.
ArghavaniMR, MovahediM, KokabiAH.Role of zinc layer in resistance spot welding of aluminium to steel. Mater Des. 2016; 102:106–114. doi: 10.1016/j.matdes.2016.04.033
