Without any presupposed mechanism, a unified three-dimensional model is developed to predict the formation of humping bead in high speed gas metal arc welding, which considers the three phase coupling of solid, liquid and gas and the effect of shear stress exerting on weld pool surface caused by arc plasma. A strong backward fluid flow in weld pool is identified as the major factor for bead hump formation. The generation of thin liquid transition zone and its premature solidification are two conditions responsible for the occurrence of humped weld. In case of low inner contact angle between the liquid metal and workpiece surface, the bead hump is still generated. With increasing welding current, the bead hump can be suppressed.
BradstreetB. J.: ‘Effect of surface tension and metal flow on weld bead formation’, Weld. J., 1968, 47, 314s–322s.
2.
ChoiW. H., FarsonD. F. and ChoM. H.: ‘A hybrid laser+GMAW process for control of the bead humping defect’, Weld. J., 2006, 85, 174s–179s.
3.
UeyamaT., OhnawaT., TanakaM., and NakataK.: ‘Effects of torch configuration and welding current on weld bead formation in high speed tandem pulsed gas metal arc welding of steel sheets’, Sci. Technol. Weld. Join., 2006, 10, 750–759. doi: 10.1179/174329305X68750
4.
LiY., WuC. S., WangL. and GaoJ. Q.: ‘Analysis of additional electromagnetic force for mitigating the humping bead in high-speed gas metal arc welding’, J. Mater. Process. Technol., 2016, 229, 207–215. doi: 10.1016/j.jmatprotec.2015.09.014
5.
GratzkeU., KapadiaP. D., KroosJ. and SimonG.: ‘Theoretical approach to the humping phenomenon in welding processes’, J. Phys: Appl. Phys., 1992, 25, 1640–1647.
6.
SchiaffinoS. and SoninA. A.: ‘Formation and stability of liquid and molten beads on a solid surface’, J. Fluid Mech., 1997, 343, 95–110. doi: 10.1017/S0022112097005831
7.
SoderstromE., MendezP.: ‘Humping mechanisms present in high speed welding’, Sci. Technol. Weld. Join., 2006, 11, 572–579. doi: 10.1179/174329306X120787
8.
NguyenT. C., WeckmanD. C., JohsonD. A., and KerrH. W.: ‘The humping phenomenon during high speed gas metal arc welding’, Sci. Technol. Weld. Join., 2005, 10, 447–459. doi: 10.1179/174329305X44134
9.
MendezP. F. and EagarT. W.: ‘Penetration and defect formation in high-current arc welding’, Weld. J., 2003, 82, 296s–306s.
10.
HuZ. K., WuC. S.: ‘Experimental investigation of forming process of humping bead in high speed MAG arc welding’, Acta Metall. Sin., 2008, 44, 1445–1449.
11.
ChenJ., WuC. S.: ‘Numerical analysis of forming mechanism of hump bead in high speed GMAW’, Weld. World, 2010, 54, R286–R291. doi: 10.1007/BF03266741
SavageW. F., NippleE. F. and AgusaK.: ‘Effect of arc force on defect formation in GTA welding’, Weld. J., 1979, 58, 212s–224s.
14.
KumarA. and DebroyT.: ‘Toward a unified model to prevent humping defects in gas tungsten arc welding’, Weld. J., 2006, 85, 292s–304s.
15.
ChoM. H. and FarsonD. F.: ‘Simulation study of a hybrid process for prevention of weld bead hump formation’, Weld. J., 2007, 86, 253s–262s.
16.
ChoM. H. and FarsonD. F.: ‘Understanding bead hump formation in gas metal arc welding using a numerical simulation’, Metall. Mater. Trans. B, 2007, 38, 305–319. doi: 10.1007/s11663-007-9034-5
17.
XuG., HuJ. and TsaiH. L.: ‘Three-dimensional modeling of arc plasma and metal transfer in gas metal arc welding’, Int. J. Heat Mass Transf., 2009, 52, 1709–1724. doi: 10.1016/j.ijheatmasstransfer.2008.09.018
18.
HuJ. and TsaiH. L.: ‘Heat and mass transfer in gas metal arc welding. Part I: The arc’, Int. J. Heat Mass Transf., 2007, 50, 833–846. doi: 10.1016/j.ijheatmasstransfer.2006.08.025
19.
WuC. S.: ‘Welding thermal processes and weld pool behaviors’, 1st edn, 110–145; 2011, Boca Raton, CRC Press, Taylor & Francis Company Inc.
20.
ZhaoT., WuC. S. and FengY. H.: ‘Numerical analysis of heat transfer and fluid flow in keyhole plasma arc welding’, Numer. Heat Transf., Part A: Appl., 2011, 60, 685–698. doi: 10.1080/10407782.2011.616851
21.
KimC. H., ZhangW. and DebRoyT.: ‘Modeling of temperature field and solidified surface profile during gas–metal arc fillet welding’, J. Appl. Phys., 2003, 94, 2667–2679. doi: 10.1063/1.1592012
22.
XuG. X., ZhangW. W., LiuP., DuB. S.: ‘Numerical analysis of fluid flow in laser+GMAW hybrid welding’, Acta Metall. Sin., 2015, 51, 713–723.
23.
ChoW. I., NaS. J., ChoM. H. and LeeJ. S.: ‘Numerical study of alloying element distribution in CO2 laser–GMA hybrid welding’, Comput. Mater. Sci., 2010, 49, 792–800. doi: 10.1016/j.commatsci.2010.06.025
24.
SubramaniamS. and WhiteD. R.: ‘Effect of shield gas composition on surface tension of steel droplets in a gas-metal-arc welding arc’, Metall. Mater. Trans. B, 2001, 32, 313–318. doi: 10.1007/s11663-001-0054-2
25.
MurphyA. B. and ArundelliC. J.: ‘Transport coefficients of argon, nitrogen, oxygen, argon-nitrogen, and argon-oxygen plasmas’, Plasma Chem. Plasma Process., 1994, 14, 451–490. doi: 10.1007/BF01570207
26.
KumarA. and DebRoyT.: ‘Heat transfer and fluid flow during gas-metal-arc fillet welding for various joint configurations and welding positions’, Metall. Mater. Trans. A, 2007, 38, 506–519. doi: 10.1007/s11661-006-9083-4
