In high speed gas metal arc welding, the higher momentum of backward flowing molten jet in a weld pool contributes to the occurrence of humping bead. In this study, the external magnetic field is exerted to control the fluid flow and its velocity distribution inside the weld pool to suppress the humping bead. The effects of the external magnetic field on the weld pool flow dynamics, arc column and the metal transfer are experimentally investigated. The required excitation current levels to suppress humping bead under different welding conditions are obtained. It is found that the deflection of arc column and liquid metal stream at wire tip can be offset by a suitable backward inclination angle of torch. With appropriate combination of external magnetic flux density and backward inclination angle of torch, a good quality weld bead without humping and spatter can be obtained in high speed GMAW.
NguyenT. C., WeckmanD. C., JohnsonD. A. and KerrH. W.: ‘The humping phenomenon during high speed gas metal arc welding’, Sci. Technol. Weld. Join., 2005, 10, 447–459. doi: 10.1179/174329305X44134
4.
WuC. S., HuZ. K. and ZhangY. M.: ‘Suppression of weld-bead defects and increase in the critical welding speed during high-speed arc welding’, P.I. Mech. Eng. B-J. Eng., 2009, 223, 751–757.
5.
NguyenT. C., WeckmanD. C. and JohnsonD. A.: ‘Predicting onset of high speed gas metal arc weld bead defects using dimensional analysis techniques’, Sci. Technol. Weld. Join., 2007, 12, 634–648. doi: 10.1179/174329307X236797
6.
ChenJ. and WuC. S.: ‘Numerical analysis of forming mechanism of hump bead in high speed GMAW’, Weld. World, 2010, 54, R286–R291. doi: 10.1007/BF03266741
7.
WuC. S., ZhongL. M. and GaoJ. Q.: ‘Visualization of hump formation in high speed gas metal arc welding’, Meas. Sci. Technol., 2009, 20, (11), 115702. doi: 10.1088/0957-0233/20/11/115702
8.
RosadoT., AlmeidaP., PiresI., MirandaR. and QuintinoL.: ‘Innovations in arc welding’, 5th Congresso Luso-Moçambicano de Engenharia, Maputo, Mozambique, September; 2008.
9.
KiranD. V., BasuB., ShahA. K., MishraS. and DeA.: ‘Probing influence of welding current on weld quality in two wire tandem submerged arc welding of HSLA steel’, Sci. Technol. Weld. Join., 2011, 15, 111–116. doi: 10.1179/136217109X12518083193432
10.
MichieK., BlackmanS. and OgunbiyiT. E. B.: ‘Twin-wire GMAW: process characteristics and applications’, Weld. J., 1999, 78, (5), 31–34.
11.
LiK. H., ChenJ. S. and ZhangY. M.: ‘Double-electrode GMAW process and control’, Weld. J., 2007, 86, 231s–237s.
12.
WuC. S., HuZ. H. and ZhongL. M.: ‘Prevention of humping bead associated with high welding speed by double-electrode gas metal arc welding’, Int. J. Adv. Manuf. Technol., 2012, 63, 573–581. doi: 10.1007/s00170-012-3944-3
MengX., QinG., ZhangY., FuB. and ZouZ.: ‘High speed TIG-MAG hybrid arc welding of mild steel plate’, J. Mater. Process. Technol., 2014, 214, 2417–2424. doi: 10.1016/j.jmatprotec.2014.05.020
15.
ChoiH. W., FarsonD. F. and ChoM. H.: ‘Using a hybrid laser plus GMAW process for controlling the bead humping defect’, Weld. J., 2006, 85, 174–179.
16.
JiangS. Y., ChenH. M. and LiuZ. L.: ‘Application and progress of magnetic control technology in welding’, China Mech. Eng., 2002, 13, 1876–1879.
17.
LiY. B., ShenQ., LinZ. Q. and HuS. J.: ‘Quality improvement in resistance spot weld of advanced high strength steel using external magnetic field’, Sci. Technol. Weld. Join., 2011, 16, 465–469. doi: 10.1179/1362171811Y.0000000002
18.
NomuraK., OginoY. and HirataY.: ‘Shape control of TIG arc plasma by cusp-type magnetic field with permanent magnet’, Weld. Int., 2012, 26, 759–764. doi: 10.1080/09507116.2011.592691
19.
GatzenM., TangZ. and VollertsenF.: ‘Effect of electromagnetic stirring on the element distribution in laser beam welding of aluminium with filler wire’, Phys. Procedia, 2011, 12, 56–65. doi: 10.1016/j.phpro.2011.03.008
20.
ShoichiM., YukioM., KokiT., YasushiT., YukinoriM. and YusukeM.: ‘Study on the application for electromagnetic controlled molten pool welding process in overhead and flat position welding’, Sci. Technol. Weld. Join., 2013, 18, 38–44. doi: 10.1179/1362171812Y.0000000070
21.
AvilovV. V., GumenyukiA., LammersM. and RethmierM.: ‘PA potion full penetration high power laser beam welding of up to 30 mm thick AlMg3 plates using electromagnetic weld pool support’, Sci. Technol. Weld. Join., 2013, 17, 128–133. doi: 10.1179/1362171811Y.0000000085
22.
BachmannM., AvilovV., GumenyukA. and RethmeierM.: ‘Numerical simulation of full-penetration laser beam welding of thick aluminium plates with inductive support’, J. Phys. D: Appl. Phys., 2012, 45, (3), 035201. doi: 10.1088/0022-3727/45/3/035201
23.
BachmannM., AvilovV., GumenyukA. and RethmeierM.: ‘About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts’, Int. J. Heat Mass Transfer, 2013, 60, 309–321. doi: 10.1016/j.ijheatmasstransfer.2013.01.015
24.
KernM., BergerP. and HugelH.: ‘Magneto-Fluid Dynamic Control of Seam Quality in CO2 Laser Beam Welding’, Weld. J., 2000, 79, (3), 72s–78s.
25.
AmbrosyG., BergerP., HuegelH. and LindenauD.: ‘The use of electromagnetic body forces to enhance the quality of laser welds’, Proc. XIV International Symposium on Gas Flow, Chemical Lasers, and High-Power Lasers, Bellingham, USA, November 2003, International Society for Optics and Photonics596–600.
26.
WuC. S., YangF. Z. and GaoJ. Q.: ‘Effect of external magnetic field on weld pool flow conditions in high-speed gas metal arc welding’, P.I. Mech. Eng. B-J. Eng., 2014, doi:10.1177/0954405414555591.
27.
ChenJ. and WuC. S.: ‘Effect of welding current and speed on occurrence of humping bead in high-speed GMAW’, China Weld., 2009, 18, (2), 35–40.
28.
YuY. and LiB. K.: ‘Calculation of electromagnetic force in electromagnetic stirring during continuous casting of steel’, Acta Metall. Sin., 2006, 42, 540–544.
