The work aims to assess the influence of tool electrode material while surface modification of Ti-alloy through the micro-electrical discharge coating (μEDC) process. Brass and tungsten micro-tool (800 μm)are chosen based on their mechanical, thermal, and electrical properties to conduct the experiments at different coating criteria such as duty cycle, voltage, and powder (tungsten disulphide) concentration. Various performance indexes i.e., micro-hardness, surface roughness, and recast surface height, are evaluated. Energy-dispersive X-ray spectroscopy (EDX) recognizes the elemental presence on the recast zone formed over Ti-alloy. A comparative analysis of the surfaces generated using both thetools is carried out for their performance measurement. The modified samples’ hardness improved by twice the base material due to the formation of hard phases of tungsten and titanium, as affirmed by the EDX study. The results indicate that both the micro-tool electrodes’ mechanical, electrical, and thermal properties significantly affect the process parameters for surface alteration of Ti-alloy.
TiwaryAP, PradhanBB, BhattacharyyaB.Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V. Mater Manuf Processes. 2019;34(10):1103–1119.
2.
JoYJ, JoYH, SeongJG, Rapid recrystallisation and surface modification of titanium by electro discharge. Surf Engg. 2015;31(12):885–991.
3.
Umar FarooqM, Pervez MughalM, AhmedN, On the investigation of surface integrity of Ti6Al4V ELI using Si-mixed electric discharge machining. Materials. 2020;13(7):1549.
4.
MohantyS, BhushanB, DasAK, Production of hard and lubricating surfaces on miniature components through micro-EDM process. Int J Adv Manuf Tech. 2019;105(5–6):1983–2000.
5.
LiuJ, SunW, HuangY.Effect of carbon nanotubes content on microstructure and properties of WC/Ni laser cladding coatings. Surf Engg. 2020. doi:10.1080/02670844.2020.1812481.
6.
JalluriTD, SomashekarS, DeyA, Characterization of thermal sprayed Si on sintered SiC for space optical applications. Surf Engg. 2020. doi:10.1080/02670844.2020.1803718.
7.
TayeD, MohantyS, DasAK, Electroless Ni–Al 2 O 3–WS 2 composite coating on aluminum substrate. Trans Indian Inst Met. 2019;72(9):2281–2292.
8.
IlangoMS, RamaseshaSK.Patterning of nanopillars-based CdS/CdTe thin films for photonic applications. Surf Engg. 2018;34(12):906–913.
9.
GodwinG, JaisinghSJ, PriyanMS, Wear and corrosion behaviour of Ti-based coating on biomedical implants. Surf Engg. 2020. doi:10.1080/02670844.2020.1730058.
10.
ZhangY, ZhuX, LiuY.Fabrication of durable superhydrophobic surface through silica-dissolution-assisted etching template approach. Surf Engg. 2020. doi:10.1080/02670844.2020.1787726.
11.
MaZ, LiuR, ZhaoY, Study on the antibacterial mechanism of Cu-bearing titanium alloy in the view of materials science. Mater Tech. 2020;35(1):11–20.
12.
MazarbhuiyaRM, DuttaH, DebnathK, Surface modification of CFRP composite using reverse-EDM method. Surf Interfaces. 2020. doi:10.1016/j.surfin.2020.100457.
13.
YapCY, LiewP, WangJ.Surface modification of tungsten carbide cobalt by electrical discharge coating with quarry dust powder: An optimisation study. Mater Res Express. 2020. doi:10.1088/2053-1591/abc09f.
14.
TyagiR, MahtoNK, DasAK, Preparation of MoS2+ Cu coating through the EDC process and its analysis. Surf Engg. 2020;36(1):86–93.
MussadaEK, PatowariPK.Characterisation of layer deposited by electric discharge coating process. Surf Engg. 2015;31(10):796–802.
17.
MohantyS, KumarV, DasAK, Surface modification of Ti-alloy by micro-electrical discharge process using tungsten disulphide powder suspension. J Manuf Processes. 2019;37:28–41.
18.
MuthuramalingamT, MohanB.Influence of discharge current pulse on machinability in electrical discharge machining. Mater Manuf Processes. 2013;28(4):375–380.
19.
KumariS, DattaS, MasantaM, Electro-discharge machining of Inconel 825 super alloy: effects of tool material and dielectric flushing. Silicon. 2018;10(5):2079–2099.
20.
PraveenL, KrishnaPG, VenugopalL, Effects of pulse ON and OFF time and electrode types on the material removal rate and tool wear rate of the Ti-6Al-4V alloy using EDM machining with reverse polarity. In IOP Conf Ser Mater Sci Eng. 2018;330:012083.
21.
SahuAK, ChatterjeeS, NayakPK, Study on effect of tool electrodes on surface finish during electrical discharge machining of nitinol. In IOP Conf Ser Mater Sci Eng. 2018;338:012033.
22.
AhmedN, IshfaqK, MoiduddinK, Machinability of titanium alloy through electric discharge machining. Mater Manuf Processes. 2019;34(1):93–102.
23.
AhmedN, AnwarS, IshfaqK, The potentiality of sinking EDM for micro-impressions on Ti-6Al-4V: keeping the geometrical errors (axial and radial) and other machining measures (tool erosion and work roughness) at minimum. Sci Rep. 2019;9(1):1–8.
24.
MuthuramalingamT, MohanB.Influence of tool electrode properties on machinability in spark erosion machining. Mater Manuf Processes. 2013;28(8):939–943.
25.
BhaumikM, MaityK.Effect of electrode materials on different EDM aspects of titanium alloy. Silicon. 2019;11(1):187–196.
26.
DewanganS, BiswasCK, GangopadhyayS.Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Mater Manuf Processes. 2014;29(11-12):1387–1394.
27.
BeigmoradiS, GhoreishiM, VahdatiM.Optimum design of vibratory electrode in micro-EDM process. Int J Adv Manuf Tech. 2018;95(9-12):3731–3744.
28.
SinghJ, SharmaRK.Multi-objective optimization of green powder-mixed electrical discharge machining of tungsten carbide alloy. Proc Inst Mech Eng C. 2018;232(16):2774–2786.
29.
KumarA, MandalA, DixitAR, Quantitative analysis of bubble size and electrodes gap at different dielectric conditions in powder mixed EDM process. Int J Adv Manuf Tech. 2020. doi:10.1007/s00170-020-05189-x.
30.
WuZZ, WuXY, XuB, Reverse-polarity PMEDM using self-welding bundled 3D-laminated microelectrodes. J Mater Process Tech. 2019;273:116261.
31.
BahgatMM, ShashAY, Abd-RabouM, Influence of process parameters in electrical discharge machining on H13 die steel. Heliyon. 2019;5(6):e01813.
32.
JahanMP, AlaviF.A study on the surface composition and migration of materials and their effect on surface microhardness during micro-EDM of Ti-6Al-4V. J Mater Engg Perf. 2019;28(6):3517–3530.
33.
BhaumikM, MaityK.Effect of different tool materials during EDM performance of titanium grade 6 alloy. Eng Sci Technol. 2018;21(3):507–516.
34.
MohantyS, DasAK, DixitAR.Surface integrity and residual stress analysis of μEDM coated Ti-alloy miniature components. Mater Manuf Processes. 2020. doi:10.1080/10426914.2020.1813894.
35.
PhilipJT, KumarD, JoshiSN, Monitoring of EDM parameters to develop tribo-adaptive Ti6Al4V surfaces through accretion of alloyed matrix. Ind Lubr Tribol. 2019;72(3):291–297.
36.
ÖpözTT, YaşarH, EkmekciN, Particle migration and surface modification on Ti6Al4V in SiC powder mixed electrical discharge machining. J Manuf Processes. 2018;31:744–758.
MolinettiA, AmorimFL, SoaresPC, Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process. Int J Adv Manuf Tech. 2016;83(5–8):1057–1068.
39.
DuC, ZhangJ, ZhangL, Acceleration effects of rare earths on salt bath nitriding: diffusion kinetics and first-principles calculations. Surf Engg. 2020. doi:10.1080/02670844.2020.1802545.
40.
LiSP, DengJX, ZhangGD, Dry cutting performance of tools deposited with TiSiN–WS2/Ti–WS2 coatings. Surf Engg. 2015;31(12):949–956.
41.
DominicJ, PerumalG, GrewalHS, Facile fabrication of superhydrophobic brass surface for excellent corrosion resistance. Surf Engg. 2020;36(6):660–664.
42.
ElagouzA, AliMK, XianjunH, Frictional performance evaluation of sliding surfaces lubricated by zinc-oxide nano-additives. Surf Engg. 2020;36(2):144–157.
