The corrosion behaviour and characterisation properties of a novel Ni–P coating on anodised aluminium alloys were inspected by utilising a salt spray technique and a polarisation system in artificial sea water. The Ni–P layer on anodised coating progression was achieved on aluminium alloys such as Al2014, Al6061 and Al7075, which are utilised in military industries. The outcomes revealed that the coating layer is contingent on the alloy type and coating settings like current density, temperature and time. Also, film thickness and hardness of aluminium alloys have been considered. The corrosion rate was established to be dependent on the alloying element such as copper. The deterioration rates of Al7075 and Al6061 were diminished by about one order of magnitude; however, for Al2014, it was amplified by an equivalent order of magnitude.
WuYS, LeePT, HsiehWZ, Interfacial reaction and mechanical reliability between Sn-3Ag-0.5Cu alloy and ultrathin-Ni(P)-type Au/Pd(P)/Ni(P)/Cu metallization pad. Surf Coat Technol. 2019;359:374–383. doi: 10.1016/j.surfcoat.2018.12.043
2.
Can-senL, Feng-huaS, Ji-zhaoL.Fabrication of Co−Ni−P film with excellent wear and corrosion resistance by electroplating with supercritical CO2 emulsion. Trans Nonferrous Metals Soc China. 2018;28:2489–2498. doi: 10.1016/S1003-6326(18)64895-2
3.
SknarYE, SavchukOO, SknarIV.Characteristics of electrodeposition of Ni and Ni-P alloys from methanesulfonate electrolytes. Appl Surf Sci. 2017;423:340–348. doi: 10.1016/j.apsusc.2017.06.146
4.
MuruganVK, JiaZ, SyaranamualGJ, An investigation into different nickel and nickel–phosphorus stacked thin coatings for the corrosion protection of electrical contacts. Surf Coat Technol. 2016;300:95–103. doi: 10.1016/j.surfcoat.2016.05.013
5.
Abdel-GawadSA, BarakaAM, MorsiMS, Development of electroless Ni-P-Al2O3 and Ni-P-TiO2 composite coatings from alkaline hypophosphite gluconate baths and their properties. Int J Electrochem Sci. 2013;8:1722–1734.
6.
MatikU.Structural and wear properties of heat-treated electroless Ni-P alloy and Ni-P-Si 3 N 4 composite coatings on iron based PM compacts. Surf Coat Technol. 2016;302:528–534. doi: 10.1016/j.surfcoat.2016.06.054
7.
KocabaşM, ÖrnekC, CurioniM, Nickel fluoride as a surface activation agent for electroless nickel coating of anodized AA1050 aluminum alloy. Surf Coat Technol. 2019;364:231–238. doi: 10.1016/j.surfcoat.2019.03.003
8.
JeongDH, ErbU, AustKT, The relationship between hardness and abrasive wear resistance of electrodeposited nanocrystalline Ni–P coatings. Scripta Mater.2003;48:1067–1072. doi: 10.1016/S1359-6462(02)00633-4
9.
DalyBP, BarryFJ.Electrochemical nickel–phosphorus alloy formation. Int Mater Rev. 2003;48:326–338. doi: 10.1179/095066003225008482
10.
SaxenaV, Uma RaniR, SharmaAK.Studies on ultra high solar absorber black electroless nickel coatings on aluminum alloys for space application. Surf Coat Technol.2006;201:855–862. doi: 10.1016/j.surfcoat.2005.12.050
11.
BahramianA, EyraudM, VacandioF, Improving the corrosion properties of amorphous Ni-P thin films using different additives. Surf Coat Technol. 2018;345:40–52. doi: 10.1016/j.surfcoat.2018.03.075
12.
Abdel-GawadSA, SadikMA, ShoeibMA.Preparation and properties of a novel nano Ni-B-Sn by electroless deposition on 7075-T6 aluminum alloy for aerospace application. J Alloys Compd. 2019;785:1284–1292. doi: 10.1016/j.jallcom.2019.01.245
13.
NarayananTSNS, KrishnaveniK, SeshadriSK.Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance. Mater Chem Phys. 2003;82:771–779. doi: 10.1016/S0254-0584(03)00390-0
14.
StremsdoerferG, OmidvarH, RouxP, Deposition of thin films of Ni–P and Ni–B–P by dynamic chemical plating. J Alloys Compd. 2008;466:391–397. doi: 10.1016/j.jallcom.2007.11.052
15.
Abdel-GawadSA, OsmanWM, FekryAM.Characterization and corrosion behavior of anodized aluminum alloys for military industries applications in artificial seawater. Surfaces Interfaces. 2019;14:314–323. doi: 10.1016/j.surfin.2018.08.001
16.
LinC, LeeC, ChenF, Structural evolution and internal stress of nickel-phosphorus electrodeposits. J Electrochem Soc.2005;152:370–375. doi: 10.1149/1.1901064
17.
Bookrags Staff. (2005). Faraday's Law [online]. [cited 2010 Nov 6]. Available from: http://www.bookrags.com/ research/faradays-laws-woc/.
18.
Vautrin-UlC, TalebA, StafiejJ, Reprint of “Mesoscopic modelling of corrosion phenomena: coupling between electrochemical and mechanical processes, analysis of the deviation from the Faraday law”. Electrochim Acta. 2007;52:7802–7810. doi: 10.1016/j.electacta.2007.08.011
19.
BarbatoS, PonceJ, MarceloJ, Study of the effect of temperature on the hardness, grain size, and yield in electrodeposition of chromium on 1045 steel. Chemistry Soc.2008;53:1440–1443.
20.
WuY, SubramanianK, BartonSC, Electrochemical studies of Pd-doped Cu and Pd-doped Cu-Al intermetallics for understanding corrosion behavior in wire-bonding packages. Microelectron Reliab. 2017;78:355–361. doi: 10.1016/j.microrel.2017.09.024
21.
ZhangY, XiaoZ, ZhaoY, Effect of thermo-mechanical treatments on corrosion behavior of Cu-15Ni-8Sn alloy in 3.5 wt% NaCl solution. Mater Chem Phys. 2017;199:54–66. doi: 10.1016/j.matchemphys.2017.06.041
22.
JiangJ, XuD, XiT, Effects of aging time on intergranular and pitting corrosion behavior of Cu-bearing 304L stainless steel in comparison with 304L stainless steel. Corros Sci. 2016;113:46–56. doi: 10.1016/j.corsci.2016.10.003
23.
DurkinB.Evolution of electroless nickel plating: what's next for EN technology? (PLATING/ANODIZING). Products Finishing; Dec 2015.
24.
HusseinMS, FekryAM.Effect of fumed silica/chitosan/poly(vinylpyrrolidone) composite coating on the electrochemical corrosion resistance of Ti–6Al–4V alloy in artificial saliva solution. ACS Omega. 2019;4:73–78. doi: 10.1021/acsomega.8b02365
25.
FekryAM, GhoneimAA, AmeerMA.Electrochemical impedance spectroscopy of chitosan coated magnesium alloys in a synthetic sweat medium. Surf Coat Technol. 2014;283:126–132. doi: 10.1016/j.surfcoat.2013.10.058
26.
AhmedRA, FekryAM, FarghaliRA.A study of calcium carbonate/multiwalled-carbon nanotubes/chitosan composite coatings on Ti–6Al–4V alloy for orthopedic implants. Appl Surf Sci. 2013;285:309–316. doi: 10.1016/j.apsusc.2013.08.056
27.
ShehataM, AmeerMA, Abdel hamidZ, The impact of cationic surfactants on the electrodeposition of nickel/graphene nano-sheet composite coatings on brass. Egypt J Chem. 2019;62:201–214.
28.
AhmedRA, FekryAM.Preparation and characterization of nanoparticles modified chitosan sensor and its application for the determination of heavy metals from different aqueous media. Int J Electrochem Sci. 2013;8:6692–6708.
29.
Abdel-GawadSA, SadikMA, ShoeibMA.Enhancing corrosion resistance of galvanized steel by phosphating and silicate post – sealing. Int J Electrochem Sci. 2018;13:2688–2704. doi: 10.20964/2018.03.18
30.
EssaK.A new algorithm for gravity or self-potential data interpretation. J Geophys Eng. 2011;8:434–446. doi: 10.1088/1742-2132/8/3/004
31.
EssaK, MehaneeS, SmithP.A new inversion algorithm for estimating the best fitting parameters of some geometrically simple body to measured self-potential anomalies. Explor Geophys. 2008;39:155–163. doi: 10.1071/EG08017
32.
Abdel-GawadSA, ShoeibMA.Corrosion studies and microstructure of Mg−Zn−Ca alloys for biomedical applications. Surfaces Interfaces. 2019;14:108–116. doi: 10.1016/j.surfin.2018.11.011
33.
González-GutiérrezaAG, Pech-CanulbMA, Chan-RosadobG, Studies on the physical and electrochemical properties of Ni-P coating on commercial aluminum as bipolar plate in PEMFC. Fuel. 2019;235:1361–1367. doi: 10.1016/j.fuel.2018.08.104
