The effect of Cr and Ni element segregation on austenite stability and deformation mechanisms of nano/ultrafine-grained 304 stainless steel obtained by cryogenic rolling plus annealing treatment was systematically studied. The results showed that the nano/ultrafine-grained steel had a good combination of strength and ductility (yield strength ∼896 MPa, tensile strength ∼977 MPa, and elongation ∼39.6%). According to the findings, the formation of Cr segregation in the body-centered cubic structure at the intersection of austenite grain boundaries and localised austenite grains with low Ni content reduced the austenite stability of the nano/ultrafine-grained steel and promoted the generation of strain-induced martensite during plastic deformation, resulting in the deformation mechanism dominated by the transformation-induced plasticity effect.
LoKH, ShekCH, LaiJKL.Recent developments in stainless steels. Mat Sci Eng R. 2009;65:39–104. doi:10.1016/j.mser.2009.03.001
2.
ForouzanF, NajafizadehA, KermanpurA, . Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process. Mater Sci Eng A. 2010;527:7334–7339. doi:10.1016/j.msea.2010.08.002
3.
OdnobokovaMV, BelyakovAN, DolzhenkoPD, . On the strengthening mechanisms of high nitrogen austenitic stainless steels. Mater Lett. 2023;331:133502. doi:10.1016/j.matlet.2022.133502
4.
SunGS, DuLX, HuJ, . Ultrahigh strength nano/ultrafine-grained 304 stainless steel through three-stage cold rolling and annealing treatment. Mater Charact. 2015;110:228–235. doi:10.1016/j.matchar.2015.11.001
5.
BarrCJ, XiaK.Grain refinement in low SFE and particle-containing nickel aluminium bronze during severe plastic deformation at elevated temperatures. J Mater Sci Technol. 2021;82:57–68. doi:10.1016/j.jmst.2020.12.016
6.
WangPJ, ZhaoJB, MaLW, . Effect of grain ultra-refinement on microstructure, tensile property, and corrosion behavior of low alloy steel. Mater Charact. 2021;179:111385. doi:10.1016/j.matchar.2021.111385
7.
LvZQ, QianLH, LiuS, . Preparation and mechanical behavior of ultra-high strength low-carbon steel. Materials (Basel). 2020;13:459. doi:10.3390/ma13020459
8.
FukudaY, Oh-ishiK, HoritaZ, . Processing of a low-carbon steel by equal-channel angular pressing. Acta Mater. 2002;50:1359–1368. doi:10.1016/S1359-6454(01)00441-4
9.
ZhengZJ, LiuJW, GaoY.Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing. Mater Sci Eng A. 2017;680:426–432. doi:10.1016/j.msea.2016.11.004
10.
SuLH, LuC, TieuK, . Annealing behavior of accumulative roll bonding processed aluminum composites. Steel Res Int. 2013;84:1241–1245. doi:10.1002/srin.201300032
11.
MiyajimaY, HommaT, TakenakaS, . High strength and low electrical resistivity of Al-0.1 at%Ni alloys produced by accumulative roll bonding. Mater Today Commun. 2022;33:104587. doi:10.1016/j.mtcomm.2022.104587
12.
SongR, PongeD, RaabeD, . Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels. Mater Sci Eng A. 2006;441:1–17. doi:10.1016/j.msea.2006.08.095
13.
Biserova-TahchievaA, ChatterjeeD, van HelvoortATJ, . Effect of the nanostructuring by high-pressure torsion process on the secondary phase precipitation in UNS S32750 Superduplex stainless steel. Mater Charact. 2022;183:111639. doi:10.1016/j.matchar.2021.111639
14.
WangBF, WangXY, LiJ.Formation and microstructure of ultrafine-grained titanium processed by multi-directional forging. J Mater Eng Perform. 2016;25:2521–2527. doi:10.1007/s11665-016-2079-3
15.
KiahosseiniSR, Mohammadi BaygiSJ, KhalajG, . A study on structural, corrosion, and sensitization behavior of ultrafine and coarse grain 316 stainless steel processed by multiaxial forging and heat treatment. J Mater Eng Perform. 2017;27:271–281. doi:10.1007/s11665-017-3095-7
16.
Celada-CaseroC, HuangBM, ArandaMM, . Mechanisms of ultrafine-grained austenite formation under different isochronal conditions in a cold-rolled metastable stainless steel. Mater Charact. 2016;118:129–141. doi:10.1016/j.matchar.2016.05.014
17.
ZhaoMM, WuHY, LuJN, . Effect of grain size on mechanical property and corrosion behavior of a metastable austenitic stainless steel. Mater Charact. 2022;194:112360. doi:10.1016/j.matchar.2022.112360
18.
WuYZ, LuoKG, ZhangY, . Microstructures and mechanical properties of a CoCrFeNiMn high-entropy alloy obtained by 223 K cryorolling and subsequent annealing. J Alloy Compd. 2022;921:166166. doi:10.1016/j.jallcom.2022.166166
19.
LuoKG, XiongHQ, ZhangY, . AA1050 metal matrix composites reinforced by high-entropy alloy particles via stir casting and subsequent rolling. J Alloy Compd. 2022;893:162370. doi:10.1016/j.jallcom.2021.162370
20.
MisraRDK, NayakS, MaliSA, . On the significance of nature of strain-induced martensite on phase-reversion-induced nanograined/ultrafine-grained austenitic stainless steel. Metall Mater Trans A. 2009;41:3–12. doi:10.1007/s11661-009-0072-2
21.
SunGS, DuLX, HuJ, . On the influence of deformation mechanism during cold and warm rolling on annealing behavior of a 304 stainless steel. Mater Sci Eng A. 2019;746:341–355. doi:10.1016/j.msea.2019.01.020
22.
TomimuraK, TakakiS, TanimotoS, . Optimal chemical composition in Fe-Cr-Ni alloys for ultra grain refining by reversion from deformation induced martensite. ISIJ Int. 1991;31:721–727. doi:10.2355/isijinternational.31.721
23.
TomimuraK, TakakiS, TokunagaY.Reversion mechanism from deformation induced martensite to austenite in metastable austenitic stainless steels. ISIJ Int. 1991;31:1431–1437. doi:10.2355/isijinternational.31.1431
24.
KaufmanL, CloughertyEV, WeissRJ.The lattice stability of metals–III. iron. Acta Metall. 1963;11:323–335. doi:10.1016/0001-6160(63)90157-3
25.
ChallaVSA, WanXL, SomaniMC, . Significance of interplay between austenite stability and deformation mechanisms in governing three-stage work hardening behavior of phase-reversion induced nanograined/ultrafine-grained (NG/UFG) stainless steels with high strength-high ductility combination. Scripta Mater. 2014;86:60–63. doi:10.1016/j.scriptamat.2014.05.010
26.
SunGS, DuLX, HuJ, . Low temperature superplastic-like deformation and fracture behavior of nano/ultrafine-grained metastable austenitic stainless steel. Mater. Design. 2017;117:223–231. doi:10.1016/j.matdes.2016.12.086
27.
LuJN, ZhaoMM, WuHY, . Effect of warm deformation on mechanical properties and deformation mechanism of nano/ultrafine-grained 304 stainless steel. Steel Res Int. 2022;93:2200198. doi:10.1002/srin.202200198
28.
ZhaoMM, WuHY, ZhangB, . Effect of Cr-rich carbide precipitates on austenite stability and consequent corrosion behavior of ultrafine-grained 304 stainless steel produced by cryogenic rolling and annealing treatment. Mater Charact. 2023;195:112553. doi:10.1016/j.matchar.2022.112553
29.
KimJ-M, JinH-H, KwonJ, . Effects of cellular segregation for high strength and ductility of additively manufactured 304L stainless steel. Mater Charact. 2022;194:112364. doi:10.1016/j.matchar.2022.112364
30.
BabichevaRI, DmitrievSV, BaiL, . Effect of grain boundary segregation on the deformation mechanisms and mechanical properties of nanocrystalline binary aluminum alloys. Comp Mater Sci. 2016;117:445–454. doi:10.1016/j.commatsci.2016.02.013
31.
ZuoJ, NakataT, XuC, . Effect of grain boundary segregation on microstructure and mechanical properties of ultra-fine grained Mg–Al–Ca–Mn alloy wires. Mater Sci Eng A. 2022;848:143423. doi:10.1016/j.msea.2022.143423
32.
GhoshS, SangwanS, MandalS, . Room temperature giant magneto-caloric effect in Ni45Mn44Sn11-XInX (X=1, 3) disordered Heusler alloy: the role of martensite transition. J Magn Magn Mater2022;562:169797. doi:10.1016/j.jmmm.2022.169797
33.
LiJB, LiY, ZhangYY, . Effect of heat treatment in dual-phase region on microstructure and property of 430 ferritic stainless steel hot rolled sheet. J Iron Steel Res. 2017;29:62–66. doi:10.13228/j.boyuan.issn1001-0963.20160192
34.
FuXQ, JiYC, ChengXQ, . Effect of grain size and its uniformity on corrosion resistance of rolled 316L stainless steel by EBSD and TEM. Mater Today Commun. 2020;25:101429. doi:10.1016/j.mtcomm.2020.101429
35.
ChowdhurySG, DattaS, KumarBR, . Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel. Mater Sci Eng A. 2007;443:114–119. doi:10.1016/j.msea.2006.09.059
36.
SunGS, DuLX, HuJ, . Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing. Mater Sci Eng A. 2018;709:254–264. doi:10.1016/j.msea.2017.10.054
37.
MasoumiM, EcheverriEAA, SilvaCC, . Effect of different thermomechanical processes on the microstructure, texture, and mechanical properties of API 5L X70 steel. J Mater Eng Perform. 2018;27:1694–1705. doi:10.1007/s11665-018-3276-z
38.
WrońskiM, WierzbanowskiK, WojtasD, . Microstructure, texture and mechanical properties of titanium grade 2 processed by ECAP (route C). Met Mater Int. 2018;24:802–814. doi:10.1007/s12540-018-0096-5
39.
SunGS, LiuJZ, ZhuYT.Heterostructure alleviates Lüders deformation of ultrafine-grained stainless steels. Mater Sci Eng A. 2022;848:143393. doi:10.1016/j.msea.2022.143393
40.
SunGS, ZhaoMM, DuLX, . Significant effects of grain size on mechanical response characteristics and deformation mechanisms of metastable austenitic stainless steel. Mater Charact. 2022;184:111674. doi:10.1016/j.matchar.2021.111674
41.
KiskoA, MisraRDK, TalonenJ, . The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr–9Mn–Ni–Cu stainless steel. Mater Sci Eng A. 2013;578:408–416. doi:10.1016/j.msea.2013.04.107
42.
JinJ-E, LeeY-K.Strain hardening behavior of a Fe–18Mn–0.6C–1.5Al TWIP steel. Mater Sci Eng A. 2009;527:157–161. doi:10.1016/j.msea.2009.08.028
43.
ChallaVSA, WanXL, SomaniMC, . Strain hardening behavior of phase reversion-induced nanograined/ultrafine-grained (NG/UFG) austenitic stainless steel and relationship with grain size and deformation mechanism. Mater Sci Eng A. 2014;613:60–70. doi:10.1016/j.msea.2014.06.065
44.
ChallaVSA, MisraRDK, SomaniMC, . Strain hardening behavior of nanograined/ultrafine-grained (NG/UFG) austenitic 16Cr–10Ni stainless steel and its relationship to austenite stability and deformation behavior. Mater Sci Eng A. 2016;649:153–157. doi:10.1016/j.msea.2015.09.112
45.
MisraRDK, KumarBR, SomaniM, . Deformation processes during tensile straining of ultrafine/nanograined structures formed by reversion in metastable austenitic steels. Scripta Mater. 2008;59:79–82. doi:10.1016/j.scriptamat.2008.02.028
46.
MisraRDK, ZhangZ, JiaZ, . Probing deformation processes in near-defect free volume in high strength–high ductility nanograined/ultrafine-grained (NG/UFG) metastable austenitic stainless steels. Scripta Mater. 2010;63:1057–1060. doi:10.1016/j.scriptamat.2010.07.041
47.
HeYM, WangYH, GuoK, . Effect of carbide precipitation on strain-hardening behavior and deformation mechanism of metastable austenitic stainless steel after repetitive cold rolling and reversion annealing. Mater Sci Eng A. 2017;708:248–253. doi:10.1016/j.msea.2017.09.103
48.
ZhengZJ, GaoY, LiuJW, . A hybrid refining mechanism of microstructure of 304 stainless steel subjected to ECAP at 500°C. Mater Sci Eng A. 2015;639:615–625. doi:10.1016/j.msea.2015.05.085
49.
SunGS, HuJ, ZhangB, . The significant role of heating rate on reverse transformation and coordinated straining behavior in a cold-rolled austenitic stainless steel. Mater Sci Eng A. 2018;732:350–358. doi:10.1016/j.msea.2018.07.024
50.
KaoumiD, LiuJL.Deformation induced martensitic transformation in 304 austenitic stainless steel: In-situ vs. ex-situ transmission electron microscopy characterization. Mater Sci Eng A. 2018;715:73–82. doi:10.1016/j.msea.2017.12.036
51.
NoharaK, OnoY, OhashiN.Strain-induced martensitic transformation in metastable austenitic stainless steels in multi-stage tensile deformation at various temperatures, new aspects of martensitic transformations. Japan Institute of Met. Tokyo. 1976;1976:315–320.
52.
MukaratiTW, MostertRJ, SiyasiyaCW.Modeling of the kinetics of strain-induced martensite transformation and the transformation-induced plasticity effect in a lean-alloyed metastable austenitic stainless steel. Steel Res Int. 2021;93:2100459. doi:10.1002/srin.202100459
53.
SchrammRE, ReedRP.Stacking fault energies of seven commercial austenitic stainless steels. Metall Trans A. 1975;6:1345. doi:10.1007/BF02641927
54.
DasA.Revisiting stacking fault energy of steels. Metall Mater Trans A. 2016;47:748–768. doi:10.1007/s11661-015-3266-9
