In the present study, strength variations across the type 316LN stainless steel weld joints processed by advanced hot wire tungsten inert gas, activated tungsten inert gas, and hybrid laser metal inert gas welding processes were evaluated using automated ball indentation technique. The secondary dendrite arm spacing (SDAS) associated with welding heat input and welding thermal cycles strongly influenced the strength properties across the weld joints. The strength properties were lower at 823 K compared to 298 K because of thermally activated deformations. The hybrid laser metal inert gas welding process exhibited significantly narrower weld and higher strength in the weld and heat-affected zone due to finer SDAS and grain size, respectively, than the other weld joints.
BhaduriAKLahaKGanesanVAdvanced materials for structural components of Indian sodium-cooled fast reactors. Int J Press Vessel Pip. 2016;139–140:123–136. doi:10.1016/j.ijpvp.2016.02.027
2.
XieWYangC.Microstructure, mechanical properties and corrosion behavior of austenitic stainless steel sheet joints welded by gas tungsten arc (GTA) and ultrasonic–wave–assisted gas tungsten pulsed arc (U–GTPA). Arch Civ Mech Eng. 2020;20:43. doi:10.1007/s43452-020-00044-y
3.
TsengKH.Development and application of oxide-based flux powder for tungsten inert gas welding of austenitic stainless steels. Powder Technol. 2013;233:72–79. doi:10.1016/j.powtec.2012.08.038
4.
VasudevanM.Effect of A-TIG welding process on the weld attributes of type 304LN and 316LN stainless steels. J Mater Eng Perform. 2017;26:1325–1336. doi:10.1007/s11665-017-2517-x
5.
SchönmaierHKreinRSchmitz-NiederauMInfluence of the heat input on the dendritic solidification structure and the mechanical properties of 2.25Cr-1Mo-0.25V submerged-arc weld metal. J Mater Eng Perform. 2021. doi:10.1007/s11665-021-05922-x
6.
VasudevanM.Effect of A-TIG welding process on the weld attributes of type 304LN and 316LN stainless steels. J Mater Eng Perform. 2017;26:1325–1336. doi:10.1007/s11665-017-2517-x
7.
RagavendranMKumarJGVasudevanM.Evaluation of tensile properties using uni-axial and ball indentation testing and correlation with microstructure variations across the 316LN stainless steel weld joints. Mater Sci Eng A. 2022;832:142445. doi:10.1016/j.msea.2021.142445
8.
KhoshnawFMHamakhanIA.Determination of the mechanical properties of austenitic stainless steel weldments by using stress strain microprobe. Mater Sci Eng A. 2006;426:1–3. doi:10.1016/j.msea.2006.03.041
9.
WuSXuTSongMMechanical properties characterisation of welded joint of austenitic stainless steel using instrumented indentation technique. Mater High Temp. 2016;33:270–275. doi:10.1080/09603409.2016.1187463
10.
DasGDasMSinhaSCharacterization of cast stainless steel weld pools by using ball indentation technique. Mater Sci Eng A. 2009;513–514:389–393. doi:10.1016/j.msea.2009.02.007
11.
SakthivelTVasudevanMLahaKComparison of creep rupture behaviour of type 316L(N) austenitic stainless steel joints welded by TIG and activated TIG welding processes. Mater Sci Eng A. 2011;528:6971–6980. doi:10.1016/j.msea.2011.05.052
12.
KumarJGVijayanandVDNandagopalMEvaluation of variation of tensile strength across 316LN stainless steel weld joint using automated ball indentation technique. Mater High Temp. 2015;32:619–626. doi:10.1179/1878641315Y.0000000008
American Welding Society. Committee on Mechanical Testing of Welds., American National Standards Institute., American Welding Society. Technical Activities Committee. 2007. Standard methods for mechanical testing of welds. 135.
15.
GaoMMeiSWWangZMCharacterisation of laser welded dissimilar Ti/steel joint using Mg interlayer. Sci Technol Weld Join. 2012;17:269–276. doi:10.1179/1362171812Y.0000000002
16.
AmericanSocietyforTestingandMaterials. ASTM E8/E8M – Standard test methods for tension testing of metallic materials; 2021. doi:10.1520/E0008_E0008M-13A
17.
Australian Standard. AS-2205-3-1, 2003. Methods for destructive testing of welds in metal – Transverse Butt Tensile Tests;Standards Australia; 2003.
18.
PeelMSteuwerAPreussMMicrostructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater. 2003;51:4791–4801. doi:10.1016/S1359-6454(03)00319-7
19.
TurskiMSmithMCBouchardPJSpatially resolved materials property data from a uniaxial cross-weld tensile test. J Press Vessel Technol. 2009;131:061406-1–061406-7. doi:10.1115/1.4000196
20.
SiefertWRuleJAlexandrovBCross weld tensile testing with digital image correlation to determine local strain response. In: Pressure vessels & Piping conference PVP2020-21580. Minneapolis (MN): American Society of Mechanical Engineers; 2020. p. 1–7.
21.
HaggagFM.1989. Field indentation microprobe for structural integrity evaluation (U.S. Patent No. 4,852,397).
22.
OliverWCPharrGM.An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7:1564–1583. doi:10.1557/JMR.1992.1564
23.
Fischer-CrippsA.A review of analysis methods for sub-micron indentation testing. Vacuum. 2000;58:569–585. doi:10.1016/S0042-207X(00)00377-8
24.
MathewMDMurtyKL.Non-destructive studies on tensile and fracture properties of molybdenum at low temperatures (148 to 423 K). J Mater Sci. 1999;34:1497–1503. doi:10.1023/A:1004547709783
25.
ChatterjeeSPanwarSMadhusoodananK.Measurement of mechanical properties of a reactor operated Zr–2.5Nb pressure tube using an in situ cyclic ball indentation system. Nucl Eng Des. 2015;288:19–26. doi:10.1016/j.nucengdes.2015.03.015
26.
HoriKKusanoKMyogaT.Development of hot wire TIG welding methods using pulsed current to heat filler wire – research on pulse heated hot wire TIG welding processes. Weld Int. 2004;18:456–468. doi:10.1533/wint.2004.3281
27.
FangCXinJDaiWDeep penetration laser welding of austenitic stainless steel thick-plates using a 20 kW fiber laser. J Laser Appl. 2020;32:012009. doi:10.2351/1.5094176
28.
WangXNZhangSHZhouJEffect of heat input on microstructure and properties of hybrid fiber laser-arc weld joints of the 800 MPa hot-rolled Nb-Ti-Mo microalloyed steels. Opt Lasers Eng. 2017;91:86–96. doi:10.1016/j.optlaseng.2016.11.010
29.
YanJGaoMZengX.Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding. Opt Lasers Eng. 2010;48:512–517. doi:10.1016/j.optlaseng.2009.08.009
30.
MoorePLHowseDSWallachER.Microstructures and properties of laser/arc hybrid welds and autogenous laser welds in pipeline steels. Sci Technol Weld Join. 2004;9:314–322. doi:10.1179/136217104225021652
31.
SubashiniLPrabhakarKVPGundakaramRCSingle pass laser-arc hybrid welding of maraging steel thick sections. Mater Manuf Process. 2016;31:2186–2198. doi:10.1080/10426914.2016.1221099
32.
UeguriSTabataYShimizuTControl of deposition rates in hot wire TIG welding. Weld Int. 1987;1:736–742. doi:10.1080/09507118709451085
33.
PavanARChandrasekarNArivazhaganBStudy of arc characteristics using varying shielding gas and optimization of activated-tig welding technique for thick AISI 316L(N) plates. CIRP J Manuf Sci Technol. 2021;35:675–690. doi:10.1016/j.cirpj.2021.08.013
34.
2021. BPVC Section IX-Welding, Brazing, and Fusing Qualifications. ASME.
35.
Tamil SelvanCPDinaharanIPalanivelRPredicting the tensile strength and deducing the role of processing conditions of hot wire gas tungsten arc welded pure nickel tubes using an empirical relationship. Int J Press Vessel Pip. 2020;188:104220. doi:10.1016/j.ijpvp.2020.104220
36.
Ganesh KumarJGanesanVLahaK.High temperature tensile properties of 316LN stainless steel investigated using automated ball indentation technique. Mater High Temp. 2019;36:48–57. doi:10.1080/09603409.2018.1456039
37.
LippoldJCKoteckiDJ.Welding metallurgy and weldability of stainless steels. Hoboken (NJ): Wiley; 2005.
38.
ChenMHChouCP.Effect of thermal cycles on ferrite content of austenitic stainless steel. Sci Technol Weld Join. 1999;4:58–62. doi:10.1179/stw.1999.4.1.58
39.
OlsonDL.Prediction of austenitic weld metal microstructure and properties. Weld J (Miami, FL). 1985;64:281s–295s.
40.
WuCLiSZhangCMicrostructural evolution in 316LN austenitic stainless steel during solidification process under different cooling rates. J Mater Sci. 2016;51:2529–2539. doi:10.1007/s10853-015-9565-0
41.
KumarSShahiAS.Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Mater Des. 2011;32:3617–3623. doi:10.1016/j.matdes.2011.02.017
42.
KrishnanKNPrasad RaoK.Effect of microstructure on stress corrosion cracking behaviour of austenitic stainless steel weld metals. Mater Sci Eng A. 1991;142:79–85. doi:10.1016/0921-5093(91)90756-D
43.
SetiaPVenkateswaranTTharianKTInfluence of Si content on the microstructure and mechanical properties of silicon stainless steel. Mater Sci Eng A. 2022;829:142141. doi:10.1016/j.msea.2021.142141
44.
CalcagnottoMPongeDDemirEOrientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD. Mater Sci Eng A. 2010;527:2738–2746. doi:10.1016/j.msea.2010.01.004
45.
GanesanVLahaKNandagopalMEffect of nitrogen content on dynamic strain ageing behaviour of type 316LN austenitic stainless steel during tensile deformation. Mater High Temp. 2014;31:162–170. doi:10.1179/1878641314Y.0000000009
46.
MurtyKLMiragliaPQMathewMDCharacterization of gradients in mechanical properties of SA-533B steel welds using ball indentation. Int J Press Vessel Pip. 1999;76:361–369. doi:10.1016/S0308-0161(99)00006-X
47.
KumarSSamantarayDAashranthBDependency of rate sensitive DRX behaviour on interstitial content of a Fe-Cr-Ni-Mo alloy. Mater Sci Eng A. 2019;743:148–158. doi:10.1016/j.msea.2018.11.062
48.
WangHJingHZhaoLDislocation structure evolution in 304L stainless steel and weld joint during cyclic plastic deformation. Mater Sci Eng A. 2017;690:16–31. doi:10.1016/j.msea.2017.02.090
49.
ZhangJYuLMaZCharacterization of microstructure and stress corrosion cracking susceptibility in a multi-pass austenitic stainless steel weld joint by narrow-gap TIG. Metall Mater Trans A. 2020;51:4549–4562. doi:10.1007/s11661-020-05871-5
