Laser Shock Peening (LSP) was introduced to reduce the residual stress and improve the wear and corrosion resistance of Fe-based 43X coating on worn U71Mn steel by laser cladding technology. The tensile stress decreased with increasing of laser power density and impact times, finally, transferred to compressive stress. The microstructure of the coatings was refined due to LSP treatment. The refined microstructure and existence of retained Austenite phase resulted in significant improvement in microhardness and anti-wear performances. The coatings after LSP process presented better corrosion resistance. However, impact three times with a higher power density has negative effect on improving the corrosion resistance.
XieYKouJYMeiJDevelopment and technical prospect of China railway. High Speed Railw Technol. 2020; 11(01):11–16.
2.
GaoWLQinFJinTAnalysis of fatigue crack initiation and propagation on U71Mn steel rail during service. J Hunan Univ. (Nat Sci). 2017; 44(06):25–29+44.
3.
WenLHLiXTLiXMain crack propagation behavior of U71Mn steel considering secondary crack. Mater Mech Eng. 2017; 41(06):79–83+89.
4.
ZhouYSunDRWangSGEffect of wear threshold on prediction for rolling contact fatigue crack initiation and wear growth effect of wear threshold on prediction for rolling contact fatigue crack initiation and wear growth of rail. J Tongji Univ (Nat Sci). 2020; 48(09):1336–1343.
5.
LiDHWangQ.Improvement of the heat treatment process of U71Mn steel rail-head. Heat Treat Met. 2004; 12:65–68.
6.
LiuLPanJZZhouMYAnalysis on structure and hardness of U71Mn rail steel after shot peening and running. Hot Work Technol. 2016; 45(04):143–145+148.
7.
GaoDQWangRChenWResearch progress of improving material properties by laser cladding. Hot Work Technol. 2017; 46(12):14–18.
8.
ChenJHuBKWuHLStructure and corrosion resistance of laser cladding Fe-based alloys. Mater Prot. 2019; 12:150–153.
9.
ZhuZJ.Effect of carburizing strengthening unit on the fatigue wear of U71Mn steel. Jilin Univ. 2017: 1–76.
10.
YangJXLiuHD.Research on the microstructure and properties of laser cladding Fe-based alloy on U71Mn rail surface. J Railw Eng Soc. 2010; 27(07):34–37+51.
11.
LeiJFQiWJXieYDOptimization of process parameters of laser cladding Ni60-25%WC coating on U71Mn steel. Surf Technol. 2018; 47(03):66–71.
12.
LiYNLiZGWangXXFe-based wear-resistant coating and railroad switch prepared using laser cladding technology and its properties. Chin J Lasers. 2020; 47(04):130–140.
13.
JiaoXWuG.Research on cracking of laser cladding. Sci Technol Inf. 2013; 01:223–224.
14.
WangWSunWLYuJTResearch status on crack control of laser cladding process coatings. Hot Work Technol. 2020; 49(20):1–5.
15.
LiuHQChaoGEWangZWResearch progress on crack control of laser clad composite coating. Heat Treat Met. 2018; 43(08):228–232.
16.
QiYAZhaoJFXieDQUltrasonic impact refining microstructure of FGH95 nickel-based super alloy laser cladding (In Chinese). Trans China Weld Inst. 2015; 36(03):59–62. +4.
17.
LiuFCChengHMYuXBControl of microstructure and mechanical properties of laser solid formed Inconel 718 super alloy by electromagnetic stirring. Opt Laser Technol. 2018; 99:342–350.
18.
ZhangYQiuCJLiuWInfluence of C-H compound and high-frequency micro-forging on microstructure and properties of 304 stainless steel fabricated by laser direct prototyping. Heat Treat Met. 2013; 84(9):870–877.
19.
ZhangDDShiYLiuJResearch on crack control of laser cladding high-hard coating. Appl Laser. 2014; 34(01):1–8.
20.
LiuDHLiLZhouBAn automatic control method based on laser peening to improve residual stress of additive manufacturing parts. Vac. 2020; 57(02):83–87.
21.
GuoZJ.Research and influence analysis of mechanical properties of metal materials based on laser impact. World Nonferrous Met.2020;(01):51–53.
22.
WuHFengXAMaoJCEffects of overlapping times on distribution of laser shock residual stress for 40Cr steel. Hot Work. Technol. 2018; 47(2):175–178.
23.
YanSXDongSYXuBSMechanics of removing residual stress of Fe314 cladding layers with laser shock processing. Chin J Lasers. 2013; 40(10):102–107.
24.
HeWFZhangJYangZJFatigue properties research of titanium alloy repaired by laser cladding and laser shock processing. Chin J Lasers. 2015; 42(11):101–107.
25.
ZhangPYWangCXieMYEffect of laser shock processing on microstructure and properties of K403 alloy repaired by laser cladding. Infrared Laser Technol. 2017; 46(09):27–33.
26.
LuJZLuHFXuXHigh-performance integrated additive manufacturing with laser shock peening–induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components. Int J Mach Tool Manu. 2020; 148(1):103475.
27.
PeiSH.Study on composite technology of laser cladding and shock peening on Ni60/MoS2/ graphite coating on reheat double valve stem surface. Jiangsu Univ. 2014: 1–84.
28.
GaoMZongJPZhangJ.Research and development trend on corrosive on railway passenger cars. Railw Locomot Cars. 2017; 37(01):86–90.
29.
HuangGLXueMLZiYZ.Review of research on corrosion and protection mechanism of metal materials. World Nonferrous Met. 2018; 06:217–218.
30.
ZhangLLiZQ.Corrosion and coating protection of steel structure. Compr Corros Control. 2014; 28(11):25–28.
31.
LuoKYZhouYLuJZInfluence of laser shock peening on microstructure and property of cladding layer of 316L stainless steel. Chin J Lasers. 2017; 44(04):67–74.
32.
LuHFWangZCaiJEffects of laser shock peening on the hot corrosion behaviour of the selective laser melted Ti6Al4V titanium alloy. Corros Sci. 2021; 188:109558.
33.
WangCYLuoKYBuXYLaser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel. Corros Sci. 2020; 177:109027.
34.
LiXCZhangYK.Effect of laser shock times on electrochemical performance of AZ31 magnesium alloy. Laser Technol. 2015; 39(04):466–470.
35.
LiYQHeWFWangXDImpact of laser shock times on the wear resistance of 38CrMoAl steel. High Voltage Technol. 2014; 40(07):2090–2094.
36.
LiSXQiaoHCZhaoJB.Research and development of laser shock processing technology. Opto-Electronic Eng. 2017; 44(6):569–576.
37.
StraffeliniGTrabuccoDMolinariA.Oxidative wear of heat-treated steels. Wear. 2001; 250(1):485–491.
38.
ArchardJF.Contact and rubbing of flat surfaces. J Appl Phys. 2003; 24(1):981–988.
39.
SunYZLiuSLiJBEffect of Fe content on microstructure and properties of laser clad layers. Mater Bull. 2017; 31(4):75–78.
40.
BaiWZWeiSZLongREffects of retained austenite on rolling wear properties of high vanadium high speed steel. Lubr Eng. 2007; 32(5):66–69.
41.
GaoHYXieHLChenJWThe penetration of X-rays. Laser Optoelectron Prog. 2001;(11):27–30.
42.
ZanYXJiaWJZhaoHZEffect of laser shock processing on residual stress and microstructure of Ti834 titanium alloy. Rare Metal Mat. Eng. 2019; 48(11):3535–3540.
43.
CaoYPJiangSZShiWDNumerical simulation and experiment micro-dimple array on E690 high-strength steel surface induced by laser shock processing. Chin Surf Eng. 2019; 32(05):69–77.
44.
ZhouWGeMZWangTM.Effect of laser shock peening on surface integrity of GH3039 super alloys. Laser Optoelectron Prog. 2021; 58(03):203–210.
45.
YangXHTangXDXueMQ.Effect of laser shock processing on anti-wear properties of crankshaft. Lubr Eng. 2010; 34(4):47–51.
46.
AyyagariAHasannaeimiVGrewalHCorrosion, erosion and wear behavior of complex concentrated alloys: a review. Metals (Basel). 2018; 8(08):603–643.
