To understand the high strain hardening capability of austenitic steels, dislocation density-based constitutive modelling has been actively employed. Despite the variation in their formulation, all models explain flow stress in terms of the density of dislocations, which are generated and annihilated simultaneously throughout the deformation. Taylor coefficient, shear modulus, twin fraction, and annihilation coefficients, which are key model parameters, are discussed in detail. The model is expected to be applied not only to austenite containing multiphase steels but also to design face-centred cubic-based alloys.
FonsteinN.Advanced high strength sheet steels. Switzerland: Springer International Publishing; 2015.
2.
BouazizO, AllainS, ScottC, et al. High manganese austenitic twinning induced plasticity steels: a review of the microstructure properties relationships. Curr Opin Solid St M Sci. 2011;15(4):141–168. doi: 10.1016/j.cossms.2011.04.002
3.
BouazizO, GueltonN.Modelling of TWIP effect on work-hardening. Mater Sci Eng A. 2001;319–321:246–249. doi: 10.1016/S0921-5093(00)02019-0
4.
TaylorG.The mechanism of plastic deformation of crystals. Part I. Theoretical. Proc Roy Soc Lond A Math Phys Eng Sci. 1934;145(855):362–387. doi: 10.1098/rspa.1934.0106
5.
BouazizO, AllainS, ScottC.Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scr Mater. 2008;58(6):484–487. doi: 10.1016/j.scriptamat.2007.10.050
6.
SoulamiA, ChoiK, ShenY.On deformation twinning in a 17.5% Mn–TWIP steel: a physically based phenomenological model. Mater Sci Eng A. 2011;528(3):1402–1408. doi: 10.1016/j.msea.2010.10.031
7.
HuangM, BouazizO, BarbierD, et al. Modelling the effect of carbon on deformation behaviour of twinning induced plasticity steels. J Mater Sci. 2011;46(23):7410–7414. doi: 10.1007/s10853-011-5703-5
8.
Rivera-Díaz-del CastilloP, HayashiK, Galindo-NavaE.Computational design of nanostructured steels employing irreversible thermodynamics. Mater Sci Tech. 2013;29(10):1206–1211. doi: 10.1179/1743284712Y.0000000179
9.
ShternerV, MolotnikovA, TimokhinaI, et al. A constitutive model of the deformation behaviour of twinning induced plasticity (TWIP) steel at different temperatures. Mater Sci Eng A. 2014;613:224–231. doi: 10.1016/j.msea.2014.06.073
10.
LiuF, DanW, ZhangW.Strain hardening model of twinning induced plasticity steel at different temperatures. Mater Des. 2015;65:737–742. doi: 10.1016/j.matdes.2014.10.008
11.
KangJH, IngendahlT, BleckW.A constitutive model for the tensile behaviour of TWIP steels: composition and temperature dependencies. Mater Des. 2016;90:340–349. doi: 10.1016/j.matdes.2015.10.126
12.
MeckingH, KocksU.Kinetics of flow and strain-hardening. Acta Metal. 1981;29(11):1865–1875. doi: 10.1016/0001-6160(81)90112-7
13.
FullmanR.Measurement of particle sizes in opaque bodies. J Met. 1953;5:447–452.
14.
KimJ, EstrinY, BeladiH, et al. Constitutive modeling of the tensile behavior of Al-TWIP steel. Metal Mater Trans A. 2012;43(2):479–490. doi: 10.1007/s11661-011-0898-2
15.
KimJ, EstrinY, De CoomanB.Application of a dislocation density-based constitutive model to Al-alloyed TWIP steel. Metal Mater Trans A. 2013;44(9):4168–4182. doi: 10.1007/s11661-013-1771-2
16.
LeeS, EstrinY, De CoomanB.Effect of the strain rate on the TRIP-TWIP transition in austenitic Fe-12 pct Mn-0.6 pct C TWIP steel. Metal Mater Trans A. 2014;45(2):717–730. doi: 10.1007/s11661-013-2028-9
17.
JungIC, De CoomanB.Temperature dependence of the flow stress of Fe-18Mn-0.6C-xAl twinning-induced plasticity steel. Acta Mater. 2013;61(18):6724–6735. doi: 10.1016/j.actamat.2013.07.042
18.
KimJK, EstrinY, De CoomanBC.Constitutive modeling of the stacking fault energy-dependent deformation behavior of Fe-Mn-C-(Al) TWIP steels. Metal Mater Trans A. 2018;49(12):5919–5924. doi: 10.1007/s11661-018-4910-y
19.
EstrinY, KubinL.Local strain hardening and nonuniformity of plastic deformation. Acta Metal. 1986;34(12):2455–2464. doi: 10.1016/0001-6160(86)90148-3
20.
KubinL, EstrinY.Evolution of dislocation densities and the critical conditions for the Portevin-Le Châtelier effect. Acta Metallurgica et Mater. 1990;38(5):697–708. doi: 10.1016/0956-7151(90)90021-8
21.
SteinmetzD, JäpelT, WietbrockB, Revealing the strain-hardening behavior of twinning-induced plasticity steels: theory, simulations, experiments. Acta Mater. 2013;61(2):494–510. doi: 10.1016/j.actamat.2012.09.064
22.
RotersF, RaabeD, GottsteinG.Work hardening in heterogeneous alloys-a microstructural approach based on three internal state variables. Acta Mater. 2000;48(17):4181–4189. doi: 10.1016/S1359-6454(00)00289-5
23.
RemyL.Kinetics of F.C.C. deformation twinning and its relationship to stress-strain behaviour. Acta Metal. 1978;26(3):443–451. doi: 10.1016/0001-6160(78)90170-0
24.
BambachM, HeppnerS, SteinmetzD, Assessing and ensuring parameter identifiability for a physically-based strain hardening model for twinning-induced plasticity. Mech Mater. 2015;84:127–139. doi: 10.1016/j.mechmat.2015.01.019
25.
Kuhlmann-WilsdorfD.Theory of plastic deformation: properties of low energy dislocation structures. Mater Sci Eng A. 1989;113:1–41. doi: 10.1016/0921-5093(89)90290-6
26.
Gutierrez-UrrutiaI, RaabeD.Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced fe–mn–al–c steel. Acta Mater. 2012;60(16):5791–5802. doi: 10.1016/j.actamat.2012.07.018
27.
AllainS.Caractérisation et modélisation thermomécaniques multi-échelles des mécanismes de déformation et d'écrouissage d'aciers austénitiques á haute teneur en manganése – Application á l'effet TWIP [dissertation]. Institut National Polytechnique de Lorraine; 2004.
28.
DumayA, ChateauJP, AllainS, et al. Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel. Mater Sci Engin A. 2008;483–484:184–187. doi: 10.1016/j.msea.2006.12.170
OlsonG, CohenM.Kinetics of strain-induced martensitic nucleation. Metal Trans A. 1975;6(4):791–795. doi: 10.1007/BF02672301
31.
JeongJ, KooY, JeongI, et al. Micro-structural study of high-mn twip steels using diffraction profile analysis. Mater Sci Eng A. 2011;530:128–134. doi: 10.1016/j.msea.2011.09.060
32.
RenardK, JacquesP.On the relationship between work hardening and twinning rate in TWIP steels. Mater Sci Eng A. 2012;542:8–14. doi: 10.1016/j.msea.2012.01.123
33.
ByunT.On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels. Acta Mater. 2003;51(11):3063–3071. doi: 10.1016/S1359-6454(03)00117-4
34.
SeoEJ, ChoL, EstrinY.Microstructure-mechanical properties relationships for quenching and partitioning (Q&P) processed steel. Acta Mater. 2016;113:124–139. doi: 10.1016/j.actamat.2016.04.048
