Numerical simulation of polymer processing, or computational rheology, is a challenging conversion of complex material properties and operating conditions into mathematical models and numerical solvers. In this contribution, the author presents a quick overview of a reasonable methodology with appropriate suggestions for performing a process simulation with chances of success.
BogerD. V. and WaltersK.: ‘Rheological phenomena in focus’; 1993, Amsterdam, Elsevier.
2.
LarsonR. G.: ‘Constitutive equations for polymer melts and solutions’; 1988, Boston, MA, Butterworths.
3.
TadmorZ. and GogosC. G.: ‘Principle of polymer processing’; 1979, New York, John Wiley & Sons.
4.
RöthemeyerF.: Kunststo,ff, 1969, 59, 333–338.
5.
DebbautB., HagströmB. and KarlssonH.: Proc. XVIII Ann. Meet. Polymer Processing Society, (ed. CovasJ. A.), paper-Id 221;2002, Minho, University de Minho.
6.
WaltersK.: ‘Rheometry’; 1975, London, Chapman and Hall.
7.
MacoskoC. W.: ‘Rheology: principles, measurements, applica-tions’; 1994, New York, J. Wiley & Sons.
8.
DebbautB. and ThomasK.: J. Non-Newt. Fluid Mech., 2004, 124, 77–91.
9.
DickJ. S. and PawlowskiH. A.: Rubber World Mag., 1992, 206, 35–40.
10.
MackleyM. R., MarshallR. T. J. and SmeuldersJ. B. A. F.: J. Rheol., 1995, 39, 1291–1305.
11.
MeissnerJ.: Rhea Acta, 1971, 10, 230–242.
12.
PetrieC. J. S.: ‘Elongational flows’; 1979, London, Pittman.
13.
MeissnerJ. and HostettlerJ.: Rheol. Acta, 1994, 33, 1–21.
14.
FranckA.: ‘The ARES-EVF: option for measuring extensional viscosity of polymer melts’, Technical note APN002, TA Instruments, Germany, 2005.
15.
SentmanatM., WangB. N. and McKinleyG. H.: J. Rheol., 2005, 49, 585–606.
16.
TirtaatmadjaV. and SridharT.: J. Rheol., 1993, 37, 1081–1102.
17.
WagnerM. H. and BernnatA.: J. Rheol., 1998, 42, 919–928.
18.
WinterH. H., MacoskoC. W. and BennettK. E.: Rheol. Acta, 1979, 18, 323–334.
19.
FrankF. C., KellerA. and MackleyM. R.: Polymer, 1971, 12, 467–473.
20.
DebbautB. and BurhinH.: J. Rheol., 2002, 46, 1155–1176.
NeidhöferT., WilhlemM. and DebbautB.: J. Rheol., 2003, 47, 1351–1371.
23.
CoxW. F. and MerzE. H.: J. Polym. Sci., 1958, 28, 619–622.
24.
LaunH. M.: J. Rheol., 1986, 30, 459–501.
25.
GleissleW.: Kegel-Platte-Rheometer für sehr zähe viskoelas-tische Flässigkeiten bei hohen Schergeschwindigkeiten; Untersuchung des FlieBverhaltens von hochmolekularem Siliconi51 und Polyisobutylen’, PhD thesis, Karlsruhe University, Germany, 1978.
26.
DebbautB., MarchalJ. M. and CrochetM. J.: Z. Angew. Math. Phys., 1995, 46, S679—S698.
27.
BirdR. B., ArmstrongR. C. and HassagerO.: ‘Dynamics of polymeric liquids’, 2nd edn; 1987, New York, John Wiley & Sons.
28.
OldroydJ. G.: Proc. Roy. Soc. A, 1958, 245A, 278–297.
29.
JohnsonM. W.Jr and SegalmanD.: J. Non-Newt. Fluid Mech., 1977, 2, 255–270.
30.
ThienN. P.: J. Rheol., 1978, 22, 259–283.
31.
ThienN. P. and TannerR. I.: J. Non-Newt Fluid Mech., 1977, 2, 353–365.
32.
GiesekusH.: J. Non-Newt. Fluid Mech., 1982, 11, 69–102.
33.
DebbautB. and DooleyJ.: J. Rheol., 1999, 43, 1525–1545.
34.
LeonovA. I.: Rheol. Acta, 1976, 15, 85–98.
35.
McLeishT. C. B. and LarsonR. G.: J. Rheol., 1998, 42, 82–112.
36.
InksonN. J., McLeishT. C. B., HarlenO. G. and GrovesD. J.: J. Rhea, 1999, 43, 873–896.
37.
ClemeurN., RutgersR. P. G. and DebbautB.: Rhea Acta, 2003, 42, 217–231.
38.
ClemeurN.: ‘Simulation, validation and application of a novel melt flow model for highly entangled linear and long chain branched polymers’, PhD thesis, University of Queensland, Brisbane, Australia, 2004.
39.
DaviesA. R.: J. Non-Newt. Fluid Mech., 1988, 29, 269–293.
40.
CrochetM. J., DaviesA. T. and WaltersK.: ‘Numerical simulation of non-Newtonian flow’; 1984, Amsterdam, Elsevier.
41.
OwensR. G. and PhillipsT. N.: ‘Computational rheology’; 2002, London, Imperial College Press.
42.
KeuningsR.: J. Non-Newt. Fluid Mech., 1986, 20, 209–226.
43.
TsaiT. P. and MalkusD. S.: Rheol. Acta, 2000, 39, 62–70.
44.
DupretF., MarchalJ. M. and CrochetM. J.: J. Non-Newt. Fluid Mech., 1985, 18, 173–186.
45.
DebbautB. and CrochetM. J.: J. Non-Newt. Fluid Mech., 1986, 20, 173–185.
46.
MarchalJ. M. and CrochetM. J.: J. Non-Newt. Fluid Mech., 1987, 26, 77–114.
47.
PereraM. W. N. and WaltersK.: J. Non-Newt. Fluid Mech., 1977, 2, 49–81.
48.
GuénetteR. and FortinM.: J. Non-Newt. Fluid Mech., 1995, 60, 27–52.
49.
CrochetM. J., DebbautB., KeuningsR. and MarchalJ. M.: in ‘Applications of CAE in extrusion and other continuous processes’, (ed. O'BrienK. T.), 25-50; 1992, München, Carl Hanser Verlag.
50.
‘POLYFLOW User's manual’, version3.11, Ansys Inc, Canonsburg, PA, USA, 2007.
51.
DebbautB.: Proc. Conf. on ‘Computational fluid dynamics ‘92’, (ed. HirchCh. and CordullaW.), Vol. 2, 1027–1034; 1992, Amsterdam, Elsevier.
52.
LangoucheF. and DebbautB.: Rheol. Acta, 1999, 38, 48–64.
53.
ClemeurN., RutgersR. P. G. and DebbautB.: J. Non-Newt. Fluid Mech., 2004, 117, 193–209.
54.
BéraudoC., FortinA., CoupezT., DemeyY., VergnesB. and AgassantJ. F.: J. Non-Newt. Fluid Mech., 1998, 79, 1–23.
55.
AgassantJ. F., BaaijensF., BastianH., BernnatA., CoupezT., DebbautB., GavrusA. L., GoublommeA., van GurpM., KoopmansR. J., LaunH. M., LeeK., NouatinO. H., MackleyM. R., PetersG. W. M., RekersG., VerbeetenW. M. H., VergnesB., WagnerM. H., WassnerE. and ZoeteliefW. F.: Int. Polym. Proc., 2002, XVII/1, 3-10.
56.
HonerkampJ. and WeeseJ.: Rheol. Acta, 1993, 35, 65–73.
57.
BaumgärtelM. and WinterH. H.: Rheol. Acta, 1989, 28, 511–519.
