The effects of deformation temperature on phase transformation and microstructure in nanostructured bainite steel were studied. The results indicate that the deformed austenite with a strain of 0.3 at 300°C presents accelerated kinetics of bainitic transformation. However, the amount of bainite in ausformed austenite then reduces with the increase in deformation temperature. A critical deformation temperature, determining whether the bainitic transformation can be promoted, was found in deformed austenite. In addition, the thickness of bainite plate in deformed austenite reduces with the decrease in ausforming temperature. The adjacent bainite ferrite plates grow up interactively, and the intersection angle is about 60–73°. A lower ausforming temperature contributes to a more serious cross-growth phenomenon of bainite plates.
CaballeroFG, BhadeshiaHKDH, MawellaKJA, Very strong low temperature bainite. Mater Sci Technol. 2002;18:279–284. doi: 10.1179/026708301225000725
2.
CaballeroFG, BhadeshiaHKDH.Very strong bainite. Curr Opin Solid State Mater Sci. 2004;8:251–257. doi: 10.1016/j.cossms.2004.09.005
3.
Garcia-MateoC, CaballeroFG, BhadeshiaHKDH.Development of hard bainite. ISIJ Int. 2003;43:1238–1243. doi: 10.2355/isijinternational.43.1238
4.
Garcia-MateoC, CaballeroFG, BhadeshiaHKDH.Mechanical properties of low-temperature bainite. Mater Sci Forum. 2005;500–501:495–502.
5.
HuHJ, XuG, LiuF, Dynamic observation of twin evolution during austenite grain growth of a Fe-C-Mn-Si alloy. Int J Mater Res. 2014;105:337–341. doi: 10.3139/146.111037
6.
ZhouMX, XuG, HuHJ, Comprehensive analysis on the effects of different stress states on the bainitic transformation. Mater Sci Eng A. 2017;704:427–433. doi: 10.1016/j.msea.2017.08.013
7.
YangZN, LongJY, ZhangFC, Microstructural evolution and performance change of a carburized nanostructured bainitic bearing steel during rolling contact fatigue process. Mater Sci Eng A. 2018. doi:10.1016/j.msea.2018.04.015.
8.
LongXY, ZhangFC, KangJ, Low temperature bainite in low carbon steel. Mater Sci Eng A. 2014;594:344–351. doi: 10.1016/j.msea.2013.11.089
9.
HuHJ, XuG, ZhouMX, Effect of Mo content on microstructure and property of low-carbon bainitic steels. Metals (Basel). 2016;6:173–182. doi: 10.3390/met6080173
10.
ZhouMX, XuG, WangL, Combined effect of the prior deformation and applied stress on the bainite transformation. Met Mater Int. 2016;22:956–961. doi: 10.1007/s12540-016-6293-1
HuF, HodgsonPD, WuKM.Acceleration of the super bainite transformation through a coarse austenite grain size. Mater Lett. 2014;122:240–243. doi: 10.1016/j.matlet.2014.02.051
13.
XuG, LiuF, WangL, A new approach to quantitative analysis of bainitic transformation in a superbainite steel. Scripta Mater. 2013;68:833–836. doi: 10.1016/j.scriptamat.2013.01.033
14.
ShipwayPH, BhadeshiaHKDH.Mechanical stabilization of bainite. Mater Sci Technol. 1995;11:1116–1128. doi: 10.1179/mst.1995.11.11.1116
15.
LarnRH, YangJR.The effect of compressive deformation of austenite on the bainitic ferrite transformation in Fe-Mn-Si-C steels. Mater Sci Eng A. 2000;278:278–291. doi: 10.1016/S0921-5093(99)00597-3
16.
ChiouCS, YangJR, HuangCY.The effect of prior compressive deformation of austenite on the toughness property in an ultra-low carbon bainite steel. Mater Chem Phys. 2001;69:113–124. doi: 10.1016/S0254-0584(00)00379-5
17.
YangJR, HuangCY, HseichWH, Mechanical stabilization of austenite against bainitic reaction in Fe–Mn–Si–C bainitic steel. Mater Trans JIM. 1996;37:579–585. doi: 10.2320/matertrans1989.37.579
18.
DavenportAT.Hot deformation of austenite. New York, ( NY): TMS-AIME; 1977. p. 517–536.
19.
LeeCH, BhadeshiaHKDH, LeeHC.Effect of plastic deformation on the formation of acicular ferrite. Mater Sci Eng A. 2003;360:249–257. doi: 10.1016/S0921-5093(03)00477-5
20.
MakiT.Physical metallurgy of direct-quenched steels. In: TaylorKA, ThompsonSW, FletcherFB, editors. Proceedings of a symposium sponsored by the Ferrous Metallurgy Committee of TMS and the Phase Transformations Committee of ASM International. Warrendale, USA: Minerals, Metals & Materials Society; 1993. p. 3–16.
21.
FreiwilligR, KudrmanJ, ChraskaP.Bainite transformation in deformed austenite. Metal Trans A. 1976;7A:1091–1097. doi: 10.1007/BF02656591
22.
JinXJ, MinN, ZhengKY, The effect of austenite deformation on bainite formation in an alloyed eutectoid steel. Mater Sci Eng A. 2006;438–440:170–172. doi: 10.1016/j.msea.2006.02.115
23.
EdwardsRH, KennonNF.The morphology and mechanical properties of bainite formed from deformed austenite. Metal Trans A. 1978;9A:1801–1809. doi: 10.1007/BF02663411
24.
BhadeshiaHKDH.The bainite transformation: unresolved issues. Mater Sci Eng A. 1999;273–275:58–66.
25.
SinghSB, BhadeshiaHKDH.Quantitative evidence for mechanical stabilisation of bainite. Mater Sci Technol. 1996;12:610–612. doi: 10.1179/mst.1996.12.7.610
26.
GongW, TomotaY, KooMS, Effect of ausforming on nanobainite steel. Scripta Mater. 2010;63:819–822. doi: 10.1016/j.scriptamat.2010.06.024
27.
GongW, TomotaY, AdachiY, Effects of ausforming temperature on bainite transformation, microstructure and variant selection in nanobainite steel. Acta Mater. 2013;61:4142–4154. doi: 10.1016/j.actamat.2013.03.041
28.
HeJG, ZhaoAM, ZhiC, Acceleration of nanobainite transformation by multi-step ausforming process. Scripta Mater. 2015;107:71–74. doi: 10.1016/j.scriptamat.2015.05.023
29.
HeJG, ZhaoAM, HuangY, Acceleration of bainite transformation at low temperature by warm rolling process. Mater Today. 2015;P2:S289–S294. doi: 10.1016/j.matpr.2015.05.040
30.
HuHJ, ZurobHS, XuG, New insights to the effects of ausforming on the bainitic transformation. Mater Sci Eng A. 2015;626:34–40. doi: 10.1016/j.msea.2014.12.043
31.
HuHJ, XuG, ZhouMX, New insights to the promoted bainitic transformation in prior deformed austenite in a Fe-C-Mn-Si alloy. Met Mater Int. 2017;23:233–238. doi: 10.1007/s12540-017-6407-4
32.
HuHJ, XuG, WangL, Effects of strain and deformation temperature on bainitic transformation in a Fe-C-Mn-Si alloy. Steel Res Int. 2017. doi:10.1002/srin.201600170.
33.
BhadeshiaHKDH.Bainite in steels. London: Institute of Materials; 1992. p. 1–450.
34.
WangCY, ShiJ, CaoWQ, Characterization of microstructure obtained by quenching and partitioning process in low alloy martensitic steel. Mater Sci Eng A. 2010;527:3442–3449. doi: 10.1016/j.msea.2010.02.020
35.
Navarro-LópezA, HidalgoJ, SietsmaJ, Characterization of bainitic /martensitic structures formed in isothermal treatments below the Ms temperature. Mater Charact. 2017;128:248–256. doi: 10.1016/j.matchar.2017.04.007
36.
TianJY, XuG, ZhouMX, Refined bainite microstructure and mechanical properties of a high-strength low-carbon bainitic steel treated by austempering below and above Ms. Steel Res Int. 2018. doi:10.1002/srin.201700469.
37.
ZhouMX, XuG, WangL, Comprehensive analysis on dilation of bainitic transformation under stress. Met Mater Int. 2015;21:985–990. doi: 10.1007/s12540-015-2348-y
38.
BhadeshiaHKDH, WaughAR.Bainite: An atom-probe study of the incomplete reaction phenomenon. Acta Metall. 1982;30:775–784. doi: 10.1016/0001-6160(82)90075-X
39.
CaballeroFG, MillerMK, Garcia-MateoC, New experimental evidence of the diffusionless transformation nature of bainite. J Alloy Compd. 2013;577:S626–S630. doi: 10.1016/j.jallcom.2012.02.130
40.
SinghSB, BhadeshiaHKDH.Estimation of bainite plate-thickness in low-alloy steels. Mater Sci Eng A. 1998;245:72–79. doi: 10.1016/S0921-5093(97)00701-6
41.
ChatterjeeS, WangHS, YangJR, Mater Sci Technol. 2006;22:641–644. doi: 10.1179/174328406X86128
42.
AvramiM.Granulation, phase change, and microstructure kinetics of phase change. III. J Chem Phys. 1941;9:177–184. doi: 10.1063/1.1750872
43.
LiuCC, JuDY, YaoKF, Bainitic transformation kinetics and stress assisted transformation. Mater Sci Technol. 2001;17:1229–1237. doi: 10.1179/026708301101509304
44.
SucciS, BenziR, CalíA, The lattice Boltzmann equation: theory and application. Phys Rep. 1992;222:187–203.
