The effect of Zn and Y on hot-tearing susceptibility (HTS) of Mg–xZn–2xY (x = 1, 1.67, 2.67) alloys is investigated. It is found that the microstructure of the alloys is mainly composed of α-Mg, long-period stacking-ordered (LPSO) phase and W-phase. Both theoretical and experimental results illustrated that HTS of the investigated alloys is in the following order: Mg–1Zn–2Y > Mg–1.67Zn–3.34Y > Mg–2.67Zn–5.34Y. For Mg–2.67Zn–5.34Y alloy, LPSO phase content reaches at the maximum and its grain size reaches at minimum of 16.4 µm, and the pinning effect of the LPSO phase on grain boundaries is considered to be an important reason for reducing HTS of the alloy.
CaoG, ZhangC, CaoH, Hot-tearing susceptibility of ternary Mg–Al–Sr alloy casting. Metall Mater Trans A. 2010;41A:706–716. doi: 10.1007/s11661-009-0134-5
2.
GundeP, SchifflA, UggowitzerPJ.Influence of yttrium additions on the hot tearing susceptibility of magnesium–zinc alloys. Mater Sci Eng A. 2010;527:7074–7079. doi: 10.1016/j.msea.2010.07.086
3.
ZhouL, HuangYD, MaoPL, Influence of composition on hot tearing in binary Mg–Zn alloys. Int J Cast Met Res. 2011;24:170–176. doi: 10.1179/136404611X13001912813942
4.
WangYS, WangQD, WuGH, Hot-tearing susceptibility of Mg–9Al–xZn alloy. Mater Lett. 2002;57:929–934. doi: 10.1016/S0167-577X(02)00898-4
5.
SongJF, WangZ, HuangYD, Hot tearing characteristics of Mg–2Ca–xZn alloys. J Mater Sci. 2016;51:2687–2704. doi: 10.1007/s10853-015-9583-y
6.
WangZ, HuangYD, SrinivasanA, Experiment and numerical analysis of hot tearing susceptibility for Mg–Y alloys. J Mater Sci. 2014;49:353–362. doi: 10.1007/s10853-013-7712-z
7.
JiDW, LiuCM, ChenZY, Effects of Zn content on microstructures and mechanical properties of as cast Mg–Zn–Y–Zr alloys. Mater Sci Technol. 2013;29:480–486. doi: 10.1179/1743284712Y.0000000165
8.
WangJF, SongPF, GaoS, Influence of Y on the phase composition and mechanical properties of as-extruded Mg–Zn–Y–Zr magnesium alloys. J Mater Sci. 2012;47:2005–2010. doi: 10.1007/s10853-011-5998-2
9.
LiuZ, ZhangSB, MaoPL, Effects of Y on hot tearing formation mechanism of Mg–Zn–Y–Zr alloys. Mater Sci Technol. 2014;30:1214–1222. doi: 10.1179/1743284713Y.0000000437
10.
LvBJ, Pengj, PengY, The effect of LPSO phase on hot deformation behavior and dynamic recrystallization evolution of Mg–2.0Zn–0.3Zr–5.8Y alloy. Mater Sci Eng A. 2013;579:209–216. doi: 10.1016/j.msea.2013.05.022
11.
LeeJY, KimDH, KimHK, Effects of Zn/Y ratio on microsture and mechanical properites of Mg–Zn–Y alloys. Mater Lett. 2005;59:3801–3805. doi: 10.1016/j.matlet.2005.06.052
12.
FengY, MaoPL, LiuZ, Hot tearing susceptibility of MgZn4.5YxZr0.5 alloys and mechanism. China Foundry. 2016;13:159–165. doi: 10.1007/s41230-016-5139-2
13.
ZhangYB, YuSR, ZhuXY, Study on as-cast microstructures and solidification process of Mg–Zn–Y alloys. J Non-Cryst Solids. 2008;354:1564–1568. doi: 10.1016/j.jnoncrysol.2007.08.049
14.
WangZ, LiYZ, WangF, Hot tearing susceptibility of Mg–xZn–2Y alloys. Trans Nonferrous Met Soc China. 2016;26:3115–3122. doi: 10.1016/S1003-6326(16)64443-6
15.
ChenTJ, ZhangDH, WangW, Effects of Y content on microstructures and mechanical properties of as-cast Mg–Zn–Nd alloys. China Foundry. 2015;12:339–348.
16.
WangZ, HuangYD, SrinivasanA, Influences of Y additions on the Hot tearing susceptibility of Mg–1.5wt.%Zn alloys. Mater Sci Forum. 2013;765:306–310. doi: 10.4028/www.scientific.net/MSF.765.306
17.
SongJF, WangZ, HuangYD, Hot tearing susceptibility of Mg–Ca binary alloys. Metall Mater Trans A. 2015;46(12):6003–6017. doi: 10.1007/s11661-015-3165-0
18.
CaoG, HaygoodI, KouS.Onset of hot tearing in ternary Mg–Al–Sr alloy casting. Metall Mater Trans A. 2010;41:2139–2150. doi: 10.1007/s11661-010-0248-9
19.
ClyneTW, DaviesGJ.The influence of compositon on solidification cracking susceptibility in binary alloys. Br Foundryman. 1981;74:65–73.
20.
ZhouL, LiuZ, HuangYD, Prediction of hot tearing susceptibility for Mg–Zn–(Al) alloys. Adv Mater Res. 2012;509:138–146. doi: 10.4028/www.scientific.net/AMR.509.138
21.
WangZ, HuangYD, SrinivasanA, Hot tearing susceptibility of binary Mg–Y alloy castings. Mater Des. 2013;47:90–100. doi: 10.1016/j.matdes.2012.12.044
22.
HuangZH, LiangSM, ChenRS, Solidification pathways and constituent phases of Mg–Zn–Y–Zr alloys. J Alloys Compd. 2009;468:170–178. doi: 10.1016/j.jallcom.2008.01.034
23.
EmadiD, WhitingLV, NafisiS, Applications of thermal analysis in quality control of solidification processes. J Therm Anal Calorim. 2005;81:235–242. doi: 10.1007/s10973-005-0772-9
24.
CruzH, GonzalezC, JuárezA, Quantification of the microconstituents formed during solidification by newton thermal analysis method. J Mater Process Technol. 2006;178:128–134. doi: 10.1016/j.jmatprotec.2006.03.152
25.
MalekanM, ShabestariSG.Computer-aided cooling curve thermal analysis used to predict the quality of aluminium alloys. J Therm Anal Calorim. 2011;103:453–458. doi: 10.1007/s10973-010-1023-2
26.
NadellaR, EskinD, KatgeramanL.Role of grain refining in hot cracking and macrosegregation in direct chill cast AA 7075 billets. Mater Sci Technol. 2007;23:1327–1335. doi: 10.1179/174328407X236580
27.
DjurdjevicMB, SokolowskiJH, OdanovicZ.Determination of dendrite coherency point characteristics using first derivative curve versus temperature. J Therm Anal Calorim. 2012;109:875–882. doi: 10.1007/s10973-012-2490-4
28.
XuDK, TangWN, LiuL, Effect of W-phase on the mechanical properties of as-cast Mg–Zn–Y–Zr alloys. J Alloys Compd. 2008;461:248–252. doi: 10.1016/j.jallcom.2007.07.096
29.
LiuZ, ZhangSB, MaoPL, Effects of Y on hot tearing susceptibility of Mg–Zn–Y–Zr alloys. Trans Nonferrous Metal Soc China. 2014;24:907–914. doi: 10.1016/S1003-6326(14)63142-3
30.
LiM.Z, WangY.Q, LiC, Effects of neodymium rich rare earth elements on microstructure and mechanical properties of as cast AZ31 magnesium alloy. Mater Sci Technol. 2014;27:1138–1142. doi: 10.1179/026708310X12668415533883
31.
XuDK, TangWN, LiuL, Effect of Y concentration on the microstructure and mechanical properties of as-cast Mg–Zn–Y–Zr alloys. J Alloys Compd. 2007;432:129–134. doi: 10.1016/j.jallcom.2006.05.123
32.
OñorbeE, GarcésG, DobesF, High-temperature mechanical behavior of extruded Mg–Y–Zn alloys containing LPSO phases. Metall Mater Trans A. 2013;44:2869–2883. doi: 10.1007/s11661-013-1628-8
33.
WangZ, SongJ, HuangYD, An investigation on hot tearing of Mg–4.5Zn–(0.5Zr) alloys with Y additions. Metall Mater Trans A. 2015;46:2108–2118. doi: 10.1007/s11661-015-2755-1
34.
HagiharaK, KinoshitaA, SuginoY, Effect of long-period stacking ordered phase on mechanical properties of Mg97Zn1Y2 extruded alloy. Acta Mater. 2010;58:6282–6293. doi: 10.1016/j.actamat.2010.07.050
35.
CaoG, KouS.Hot tearing of ternary Mg–Al–Ca alloy castings. Metall Mater Trans A. 2006;37:3647–3663. doi: 10.1007/s11661-006-1059-x
