A novel Mg–Zn–Zr–Y–Cu alloy was fabricated, and its corrosion behaviour was investigated in the present work. The results showed that, compared with Mg–6Zn–0.5Zr (ZK60) alloy, Mg–6Zn–1Y–0.5Cu–0.5Zr (ZWCK6100) alloy exhibited finer recrystallised (DRXed) and unDRXed grains, more homogeneous microstructure, and contained CuMgZn and I phase (Mg3Zn6Y) in addition to α-Mg, Zn2Zr, MgZn2 precipitates. As a result, ZWCK6100 alloy had a lower corrosion rate and higher corrosion resistance, underwent slightly localised corrosion in 3.5 wt-% NaCl solution, implying that the combined addition of Y and Cu was conducive to improving the corrosion resistance of Mg alloys.
SongJFSheJChenDLLatest research advances on magnesium and magnesium alloys worldwide. J Magnes Alloys. 2020;8:1–41.
2.
AbdelGawadMUsmanCAShunmugasamyVCCorrosion behavior of Mg-Zn-Zr-RE alloys under physiological environment – impact on mechanical integrity and biocompatibility. J Magnes Alloys. 2022;10(6):1542–1572.
3.
BakeSMLeeSYKimJCRole of trace additions of Mn and Y in improving the corrosion resistance of Mg–3Al–1Zn alloy. Corros Sci. 2021;178:108998.
4.
OlugbadeTLiuCLuJ.Enhanced passivation layer by Cr diffusion of 301 stainless steel facilitated by SMAT. Adv Eng Mater. 2019;21:1900125.
5.
OlugbadeTLuJ.Enhanced corrosion properties of nanostructured 316 stainless steel in 0.6 M NaCl solution. J Bio Tribo-Corros. 2019;5:38.
6.
SunYHWangRCPengCQMicrostructure and corrosion behavior of as-extruded Mg-xLi-3Al-2Zn-0.2Zr alloys (x = 5, 8, 11 wt.%). Corros Sci. 2020;167:108487.
7.
ChoDHAveyTNamKHIn vitro and in vivo assessment of squeeze-cast Mg-Zn-Ca-Mn alloys for biomedical application. Acta Biomater. 2022;150:442–455.
8.
LiQWangQDLiDQEffect of Nd and Y addition on microstructure and mechanical properties of extruded Mg-Zn-Zr alloy. Mater Sci Forum. 2007;546-549:413–416.
9.
ZhangYZWangXYKuangYFEnhanced mechanical properties and degradation rate of Mg-3Zn-1Y based alloy by Cu addition for degradable fracturing ball applications. Mater Lett. 2017;195:194–197.
10.
Torbati-SarrafSALangdonTG.Properties of a ZK60 magnesium alloy processed by high-pressure torsion. J Alloys Compd. 2014;613:357–363.
11.
RenXWHuangYCZhangXYInfluence of shear deformation during asymmetric rolling on the microstructure, texture and mechanical properties of the AZ31B magnesium alloy sheet. Mater Sci Eng, A. 2021;800:140306.
12.
LiXPLiXHYeYDDeformation mechanisms and recrystallization behavior of Mg-3Al-1Zn and Mg-1Gd alloys deformed by electroplastic-asymmetric rolling. Mater Sci Eng, A. 2019;742:722–733.
13.
GaoMYangKTanLLRole of bimodal-grained structure with random texture on mechanical and corrosion properties of a Mg-Zn-Nd alloy. J Magnes Alloys. 2022;10(8):2147–2157.
14.
OlugbadeTOmiyaleBOjoO.Corrosion, corrosion fatigue, and protection of magnesium alloys: mechanisms, measurements and mitigation. J Mater Eng Perform. 2022;31(3):1707–1727.
15.
OlugbadeTAbioyeTFarayibiPElectrochemical properties of MgZnCa-based thin film metallic glasses fabricated by magnetron sputtering deposition coated on a stainless steel substrate. Anal Lett. 2021;54(10):1588–1602.
16.
BaekSMKimBParkSS.Influence of intermetallic particles on the corrosion properties of extruded ZK60 Mg alloy containing Cu. Metals. 2018;8(323):1–9.
17.
ZhuHMLuoCPLiuJWEffects of Cu addition on microstructure and mechanical properties of as-cast magnesium alloy ZK60. Trans Nonferrous Met Soc China. 2014;24(3):605–610.
18.
ZhuSLuoTZhangTEffects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy. Mater Sci Eng, A. 2017;689:203–211.
19.
WangJLiuRLuoTA high strength and ductility Mg-Zn-Al-Cu-Mn magnesium alloy. Mater Des. 2013;47:746–749.
20.
ZhangJHLiuSJWuRZRecent developments in high-strength Mg-RE-based alloys: focusing on Mg-Gd and Mg-Y systems. J Magnes Alloys. 2018;6(3):277–291.
21.
ChenHLLinLMaoPLPhase stability, electronic, elastic and thermodynamic properties of Al-RE intermetallics in Mg-Al-RE alloy: a first principles study. J Magnes Alloys. 2015;3(3):197–202.
22.
DongJLiuWCSongXInfluence of heat treatment on fatigue behavior of high-strength Mg-10Gd-3Y alloy. Mater Sci Eng, A. 2010;527(21-22):6053–6063.
23.
LuoSQTangATPanFSEffect of mole ratio of Y to Zn on phase constituent of Mg-Zn-Zr-Y alloys. Trans Nonferrous Met Soc China. 2011;21(4):795–800.
24.
KwakTYLimHKKimWJ.Effect of the volume fraction of the icosahedral phase on the microstructures, hot compressive behaviors and processing maps of Mg-Zn-Y alloys. J Alloys Compd. 2017;725:711–723.
25.
JiaHMLiJRLiYJMechanical properties and stress corrosion cracking behavior of a novel Mg-6Zn-1Y-0.5Cu-0.5Zr alloy. J Alloys Compd. 2022;911:164995.
26.
ShiZMLiuMAtrensA.Measurement of the corrosion rate of magnesium alloys using tafel extrapolation. Corros Sci. 2010;52:579–588.
27.
JiaHMFengXHYangYS.Microstructure and corrosion resistance of directionally solidified Mg-2 wt.% Zn alloy. Corros Sci. 2017;120:75–81.
28.
LuoYFDengLQGuanLQEffect of grain size and crystal orientation on the corrosion behavior of as-extruded Mg-6Gd-2Y-0.2Zr alloy. Corros Sci. 2020;164:108338.
29.
LiXJLiuSHDuY.Investigation on the corrosion resistance of the Mg-10Al-xMn alloys based on the thermodynamic calculations. Corros Sci. 2021;189:109631.
30.
ShiFYuYCGuoXFCorrosion behavior of as-cast Mg68Zn28Y4 alloy with I-phase. Trans Nonferrous Met Soc China. 2009;19:1093–1097.
31.
LiuLLiuZLiJBEffect of Y content on corrosion resistance of Mg-Zn-Y alloys. Hot Work Technol. 2017;46:49–52.
32.
WuPPXuFJDengKKEffect of extrusion on corrosion properties of Mg-2Ca-xAl (x = 0, 2, 3, 5) alloys. Corros Sci. 2017;127:280–290.
33.
HagiharaKOkuboMYamasakiMCrystal-orientation-dependent corrosion behavior of single crystals of a pure Mg and Mg-Al and Mg-Cu solid solutions. Corros Sci. 2016;109:68–85.
34.
LiuMQiuDZhaoMCThe effect of crystallographic orientation on the active corrosion of pure magnesium. corrosion science. Scr Mater. 2008;58(5):421–424.
