The interest towards field-assisted sintering techniques has been growing rapidly in the last 20 years, particularly in applications involving hard to sinter materials, such as nanocrystalline, refractory, and metastable materials. These techniques, in fact, allow obtaining the densification in conditions that are considerably milder than in traditional pressureless sintering or in hot-pressing. Despite this success, there is still a poor understanding of the involved basic mechanisms. In this assessment, all the main aspects associated with the use of these technique will be presented and discussed, with particular emphasis on spark plasma sintering.
MunirZA, Anselmi-TamburiniU, OhyanagiM.The effect of electric field and pressure on the synthesis and consolidation of materials: a review of the spark plasma sintering method. J Mater Sci. 2006;41(3):763–777. doi: 10.1007/s10853-006-6555-2
2.
OrrùR, LicheriR, LocciAM, Consolidation/synthesis of materials by electric current activated/assisted sintering. Mater Sci Eng R Rep. 2009;63(4–6):127–287. doi: 10.1016/j.mser.2008.09.003
3.
GrassoS, SakkaY, MaizzaG.Electric current activated/assisted sintering (ECAS): a review of patents 1906–2008. Sci Technol Adv Mater. 2009;10(5):053001. doi: 10.1088/1468-6996/10/5/053001
4.
GarayJE.Current-activated, pressure-assisted densification of materials. Annu Rev Mater Res. 2010;40(1):445–468. doi: 10.1146/annurev-matsci-070909-104433
5.
GuillonO, Gonzalez-JulianJ, DargatzB, Field-assisted sintering technology/spark plasma sintering: mechanisms, materials, and technology developments. Adv Eng Mater. 2014;16(7):830–849. doi: 10.1002/adem.201300409
6.
MunirZA, QuachDV, OhyanagiM.Electric current activation of sintering: a review of the pulsed electric current sintering process. J Am Ceram Soc. 2011;94(1):1–19. doi: 10.1111/j.1551-2916.2010.04210.x
7.
GrozaJR, ZavaliangosA.Sintering activation by external electrical field. Mater Sci Eng A. 2000;287:171–177. doi: 10.1016/S0921-5093(00)00771-1
8.
MagliaF, TrediciIG, Anselmi-TamburiniU.Densification and properties of bulk nanocrystalline functional ceramics with grain size below 50 nm. J Eur Ceram Soc. 2013;33(6):1045–1066. doi: 10.1016/j.jeurceramsoc.2012.12.004
9.
RybakovKI, OlevskyEA, KrikunEV.Microwave sintering: fundamentals and modeling. J Am Ceram Soc. 2013;96(4):1003–1020. doi: 10.1111/jace.12278
10.
ColognaM, RashkovaB, RajR.Flash sintering of nanograin zirconia in <5 s at 850°C. J Am Ceram Soc. 2010;93(11):3556–3559. doi: 10.1111/j.1551-2916.2010.04089.x
11.
GermanR.Sintering theory and practice. New York: Wiley; 1996.
12.
OmoriM.Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS). Mater Sci Eng A. 2000;287:183–188. doi: 10.1016/S0921-5093(00)00773-5
13.
Anselmi TamburiniU, SpinoloG, MagliaF, Field assisted sintering mechanisms. In: CastroR and van BenthemK, editors. Sintering mechanisms of convention nanodensification and field assisted processes. Berlin, Heidelberg: Springer; 2012. p. 159–191.
14.
HoPS, KwokT.Electromigration in metals. Rep Prog Phys. 1989;52(3):301–398. doi: 10.1088/0034-4885/52/3/002
15.
ConradH.Electroplasticity in metals and ceramics. Mater Sci Eng A. 2000;287:276–287. doi: 10.1016/S0921-5093(00)00786-3
BeckerA, AngstS, SchmitzA, The effect of Peltier heat during current activated densification. Appl Phys Lett. 2012;101(1):013113. doi: 10.1063/1.4731272
18.
Anselmi-TamburiniU, GarayJE, MunirZA.Fundamental investigations on the spark plasma sintering/synthesis process. III. Current effect on reactivity. Mater Sci Eng A. 2005;407(1–2):24–30. doi: 10.1016/j.msea.2005.06.066
19.
GarayJE, Anselmi-TamburiniU, MunirZA.Enhanced growth of intermetallic phases in the Ni-Ti system by current effects. Acta Mater. 2003;51(15):4487–4495. doi: 10.1016/S1359-6454(03)00284-2
20.
ZhaoJ, GarayJE, Anselmi-TamburiniU, Directional electromigration-enhanced interdiffusion in the Cu-Ni system. J Appl Phys. 2007;102(11):114902/1–114902/7.
21.
ByeonSC, HongKS.Electric field assisted bonding of ceramics. Mater Sci Eng A. 2000;287:159–170. doi: 10.1016/S0921-5093(00)00769-3
22.
TechaumnatB, TakumaT.Calculation of the electric field for lined-up spherical dielectric particles. IEEE Trans Dielectr Electr Insul. 2003;10(4):623–633. doi: 10.1109/TDEI.2003.1219647
23.
HollandTB, Anselmi-TamburiniU, QuachDV, Local field strengths during early stage field assisted sintering (FAST) of dielectric materials. J Eur Ceram Soc. 2012;32(14):3659–3666. doi: 10.1016/j.jeurceramsoc.2012.03.012
24.
YooH-I, LeeJ-H, MartinM, Experimental evidence of the interference between ionic and electronic flows in an oxide with prevailing electronic conduction. Solid State Ion. 1994;67(3–4):317–322. doi: 10.1016/0167-2738(94)90024-8
25.
YooH-I, LeeD-K.Onsager coefficients of mixed ionic electronic conduction in oxides. Solid State Ion. 2008;179(21–26):837–841. doi: 10.1016/j.ssi.2008.01.039
26.
Anselmi-TamburiniU, GennariS, GarayJE, Fundamental investigations on the spark plasma sintering/synthesis process. II: modeling of current and temperature distributions. Mater Sci Eng A. 2005;394(1–2):139–148. doi: 10.1016/j.msea.2004.11.019
27.
SchwesigD, SchierningG, TheissmannR, From nanoparticles to nanocrystalline bulk: percolation effects in field assisted sintering of silicon nanoparticles. Nanotechnology. 2011;22(13):135601. doi: 10.1088/0957-4484/22/13/135601
28.
HulbertDM, AndersA, DudinaDV, The absence of plasma in ‘spark plasma sintering’. J Appl Phys. 2008;104(3):033305/1–033305/7. doi: 10.1063/1.2963701
29.
HitchcockD, LivingstonR, LiebenbergD.Improved understanding of the spark plasma sintering process. J Appl Phys. 2015;117(17):174505. doi: 10.1063/1.4919814
30.
MarderR, EstournèsC, ChevallierG, Spark and plasma in spark plasma sintering of rigid ceramic nanoparticles: a model system of YAG. J Eur Ceram Soc. 2015;35(1):211–218. doi: 10.1016/j.jeurceramsoc.2014.08.001
31.
ShirooyehM, GarayJE, LangdonTG.Characteristics of a Zirconia-Spinel composite processed by a current-activated pressure-assisted densification method. In: Singh D, Salem J, editors. Mechanical Properties and Performance of Engineering Ceramics and Composites IX. London: John Wiley & Sons; 2014. p. 151–159.
32.
WiegAT, KoderaY, WangZ, Thermomechanical properties of rare-earth-doped AlN for laser gain media: the role of grain boundaries and grain size. Acta Mater. 2015;86:148–156. doi: 10.1016/j.actamat.2014.11.045
33.
MagliaF, TrediciIG, SpinoloG, Low temperature proton conduction in bulk nanometric TiO2 prepared by high-pressure field assisted sintering. J Mater Res. 2012;27(15):1975–1981. doi: 10.1557/jmr.2012.158
34.
TrediciIG, MagliaF, DapiaggiM, Synthesis of bulk tetragonal zirconia without stabilizer: the role of precursor nanopowders. J Eur Ceram Soc. 2012;32(2):343–352. doi: 10.1016/j.jeurceramsoc.2011.09.022
35.
SalamonD, ShenZ.Pressure-less spark plasma sintering of alumina. Mater Sci Eng A. 2008;475(1–2):105–107. doi: 10.1016/j.msea.2007.01.162
36.
BradburyWL, OlevskyEA.Production of SiC–C composites by free-pressureless spark plasma sintering (FPSPS). Scr Mater. 2010;63(1):77–80. doi: 10.1016/j.scriptamat.2010.03.009
37.
LiD, ShenZ.Sintering by intense thermal radiation (SITR): a study of temperature distribution by simulation and experiments. J Eur Ceram Soc. 2015;35(12):3303–3309. doi: 10.1016/j.jeurceramsoc.2015.03.021
38.
FreiJM, Anselmi-TamburiniU, MunirZA.Current effects on neck growth in the sintering of copper spheres to copper plates by the pulsed electric current method. J Appl Phys. 2007;101(11):114914/1–114914/8. doi: 10.1063/1.2743885
39.
GuS, ZhangX, WangL, Direct indication of a higher central temperature achieved during spark plasma sintering process of a zeolite. J Eur Ceram Soc. 2015;35(5):1599–1603. doi: 10.1016/j.jeurceramsoc.2014.11.012
40.
MuñozS, Anselmi-TamburiniU.Temperature and stress fields evolution during spark plasma sintering processes. J Mater Sci. 2010;45(23):6528–6539. doi: 10.1007/s10853-010-4742-7
41.
MuñozS, Anselmi-TamburiniU.Parametric investigation of temperature distribution in field activated sintering apparatus. Int J Adv Manuf Technol. 2013;65:127–140. doi: 10.1007/s00170-012-4155-7
42.
ZavaliangosA, ZhangJ, KrammerM, Temperature evolution during field activated sintering. Mater Sci Eng A. 2004;379(12):218–228. doi: 10.1016/j.msea.2004.01.052
43.
VanmeenselK, LaptevA, HennickeJ, Modelling of the temperature distribution during field assisted sintering. Acta Mater. 2005;53(16):4379–4388. doi: 10.1016/j.actamat.2005.05.042
44.
GiuntiniD, RaethelJ, HerrmannM, Advancement of tooling for spark plasma sintering. J Am Ceram Soc. 2015;98(11):3529–3537. doi: 10.1111/jace.13528
45.
VoisinT, DurandL, KarnatakN, Temperature control during spark plasma sintering and application to up-scaling and complex shaping. J Mater Process Technol. 2013;213(2):269–278. doi: 10.1016/j.jmatprotec.2012.09.023
46.
VanherckT, JeanG, GononM, Spark plasma sintering: homogenization of the compact temperature field for non conductive materials. Int J Appl Ceram Technol. 2015;12:E1–E12. doi: 10.1111/ijac.12187
47.
HulbertDM, JiangD, Anselmi-TamburiniU, Continuous functionally graded boron carbide-aluminum nanocomposites by spark plasma sintering. Mater Sci Eng A. 2008;493(1–2):251–255. doi: 10.1016/j.msea.2007.05.124
OlevskyEA, FroyenL.Impact of thermal diffusion on densification during SPS. J Am Ceram Soc. 2009;92(S1):S122–S132. doi: 10.1111/j.1551-2916.2008.02705.x
50.
HollandTB, Anselmi-TamburiniU, QuachDV, Effects of local Joule heating during the field assisted sintering of ionic ceramics. J Eur Ceram Soc. 2012;32(14):3667–3674. doi: 10.1016/j.jeurceramsoc.2012.02.033
51.
Kuz'movAV, OlevskiEA, AleksandrovaEV.Effect of micrononuniform heating of powder in field-assisted sintering on shrinkage kinetics. Powder Metall Met Ceram. 2013;51(11–12):657–665. doi: 10.1007/s11106-013-9481-2
52.
JohnsonDL.Comment on ‘temperature-gradient-driven diffusion in rapid-rate sintering’. J Am Ceram Soc. 1990;73(8):2576–2578. doi: 10.1111/j.1151-2916.1990.tb07642.x
53.
ShenZ, JohnssonM, ZhaoZ, Spark plasma sintering of alumina. J Am Ceram Soc. 2002;85(8):1921–1927. doi: 10.1111/j.1151-2916.2002.tb00381.x
54.
ZhouY, HiraoK, YamauchiY, Densification and grain growth in pulse electric current sintering of alumina. J Eur Ceram Soc. 2004;24(12):3465–3470. doi: 10.1016/j.jeurceramsoc.2003.10.013
55.
WangX, CasolcoSR, XuG, Finite element modeling of electric current-activated sintering: the effect of coupled electrical potential, temperature and stress. Acta Mater. 2007;55(10):3611–3622. doi: 10.1016/j.actamat.2007.02.022
56.
HelleAS, EasterlingKE, AshbyMF.Hot-isostatic pressing diagrams: new developments. Acta Metall. 1985;33(12):2163–2174. doi: 10.1016/0001-6160(85)90177-4
57.
ArztE, AshbyMF, EasterlingKE.Practical applications of hotisostatic pressing diagrams: four case studies. Metall Trans A. 1983;14(1):211–221. doi: 10.1007/BF02651618
58.
ChaimR, MargulisM.Densification maps for spark plasma sintering of nanocrystalline MgO ceramics. Mater Sci Eng A. 2005;407(1–2):180–187. doi: 10.1016/j.msea.2005.07.024
59.
OlevskyE, FroyenL.Constitutive modeling of spark-plasma sintering of conductive materials. Scr Mater. 2006;55(12):1175–1178. doi: 10.1016/j.scriptamat.2006.07.009
60.
OlevskyEA, BradburyWL, HainesCD, Fundamental aspects of spark plasma sintering: I. Experimental analysis of scalability. J Am Ceram Soc. 2012;95:2406–2413. doi: 10.1111/j.1551-2916.2012.05203.x
61.
OlevskyEA, Garcia-CardonaC, BradburyWL, Fundamental aspects of spark plasma sintering: II. Finite element analysis of scalability. J Am Ceram Soc. 2012;95:2414–2422. doi: 10.1111/j.1551-2916.2012.05096.x
62.
WangL, PouchlyV, MacaK, Intensive particle rearrangement in the early stage of spark plasma sintering process. J Asian Ceram Soc. 2015;3(2):183–187. doi: 10.1016/j.jascer.2015.02.004
63.
OlevskyE, KhaleghiE, GarciaC, Fundamentals of spark-plasma sintering: applications to net-shaping of high strength temperature resistant components. Mater Sci Forum. 2010;654–656:412–415.
64.
JiangD, HulbertDM, KuntzJD, Spark plasma sintering: a high strain rate low temperature forming tool for ceramics. Mater Sci Eng A. 2007;463(1–2):89–93. doi: 10.1016/j.msea.2006.07.163
65.
HanY-H, MukherjeeAK.Nanostructured bulk ceramics (part II. Superplasticity and high strain rate superplasticity). J Korean Ceram Soc. 2009;46(4):345–349. doi: 10.4191/KCERS.2009.46.4.345
66.
KesselHU.Sintered materials on the way to production by means of modern SPS technologies. CfiBerickte DKG. 2009;86(10):E145–E152.
67.
WilliamsJ, HitchcockD, HeJ.Spark plasma sintering: a brief survey of recent patents. Recent Pat Mater Sci. 2012;5:191–198. doi: 10.2174/1874464811205030191
KesselHU.Short-time sintering for cost-efficient production and material development. CfiBerickte DKG. 2010;87(10):E23–E26.
70.
KimCK, LeeHS, ShinSY, Microstructure and mechanical properties of Cu-based bulk amorphous alloy billets fabricated by spark plasma sintering. Mater Sci Eng A. 2005;406(1–2):293–299. doi: 10.1016/j.msea.2005.06.043
