The pinning of austenite grain boundaries by manganese sulphide particles is examined experimentally as a function of the shape and size of the inclusions in a free-machining steel. With the same volume fraction, large and extremely long MnS particles are found to be more effective at hindering the motion of austenite grain boundaries than those that approximate spherical shape, even when the latter are smaller and have a higher number density.
MerchantM. and ZlatinN.: ‘Basic reasons for good machinability of free machining steels’, Trans. Am. Soc. Metals, 1949, 41, 647–677.
2.
YaguchiH.: ‘Scanning electron microscopy and electron microprobe analysis of built-up edges in low carbon resulfurized free-machining steel’, Mater. Sci. Eng., 1986, 80, L27–L30. doi: 10.1016/0025-5416(86)90208-9
3.
SmithC. S.: ‘Grains, phases, and interfaces: an interpretation of microstructure’, Trans. Am. Inst. Mining Metall. Petroleum Eng., 1948, 175, 15.
4.
HillertM.: ‘Zener's pinning effect: role of dispersed particle on grain size’, Tech. Rep. TRITA-MAC-0369, Royal Institute of Technology, Stockholm, Sweden, 1988.
5.
ManoharP., FerryM. and ChandraT.: ‘Five decades of the zener equation’, ISIJ Int., 1998, 38, 913–924. doi: 10.2355/isijinternational.38.913
6.
KimB.-N. and KishiT.: ‘Finite element simulation of zener pinning behavior’, Acta Mater., 1999, 47, 2293–2301. doi: 10.1016/S1359-6454(99)00069-5
7.
GottsteinG. and ShvindlermanL. S.: ‘On the retardation of grain boundary motion by small particles’, Scr. Mater., 2010, 63, 1089–1091. doi: 10.1016/j.scriptamat.2010.08.005
8.
NesE., RyumN. and HunderiO.: ‘On the zener drag’, Acta Metall., 1985, 33, 11–22. doi: 10.1016/0001-6160(85)90214-7
9.
LiW.-B. and EasterlingK. E.: ‘The influence of particle shape on Zener drag’, Acta Metall. Mater., 1990, 38, 1045–1052. doi: 10.1016/0956-7151(90)90177-I
10.
RingerS. P., LiW. B. and EasterlingK. E.: ‘On the interaction and pinning of grain boundaries by cubic shaped precipitate particles’, Acta Metall., 1989, 37, 831–841. doi: 10.1016/0001-6160(89)90010-2
11.
ChangK., FengW. and ChenL.-Q.: ‘Effect of second-phase particle morphology on grain growth kinetics’, Acta Mater., 2009, 57, 5229–5236. doi: 10.1016/j.actamat.2009.07.025
12.
ChangK. and ChenL.-Q.: ‘Quantitative evaluation of particle pinning force on a grain boundary using the phase-field method’, Model. Simulation Mater. Sci. Eng., 2012, 20, 055004.
13.
ChenJ., BhadeshiaH. K. D. H., HaslerS., RoelofsH. and UlrauU.: ‘Complete calculation of steel microstructure for strong alloys’ in ‘New Developments on Metallurgy and Applications of High Strength Steels, Buenos Aires’, (ed. T. Pérez), 749–759; 2008, Materials Park, OH, USA, TMS-AIME.
14.
RoelofsH., HaslerS., ChabbiL., UrlauU., ChenJ. and BhadeshiaH. K. D. H.: ‘Multiphase structures in case hardening steels following continuous cooling’, in ‘New Developments on Metallurgy and Applications of High Strength Steels’, (ed. T. Perez), 761–768; 2008, Materials Park, OH, USA, TMS-AIME.
15.
GuoL., RoelofsH., LembkeM. and BhadeshiaH.: ‘Modelling of transition from upper to lower bainite in multi-component system’, Mater. Sci. Technol., 1–8. doi:10.1080/02670836.2016.1221495.
16.
Pous-RomeroH., LonardelliI., CogswellD. and BhadeshiaH. K. D. H.: ‘Austenite grain growth in a nuclear pressure vessel steel’, Mater. Sci. Eng. A, 2013, 567, 72–79. doi: 10.1016/j.msea.2013.01.005
17.
KozeschnikE. and BuchmayrB.: ‘Matcalc – a simulation tool for multicomponent thermodynamics, diffusion and phase transformations’, in ‘Fifth International Seminar on the Numerical Analysis of Weldability’, 349–361; 1999.
18.
GladmanT. and PickeringF. B.: ‘Grain coarsening of austenite’, J. Iron Steel Inst., 1967, 205, 653–664.
19.
MilitzerM., GiumelliA., HawboltE. B. and MeadowcroftT. R.: ‘Austenite grain growth kinetics in Al-killed plain carbon steels’, Metall. Mater. Trans. A, 1996, 27A, 3399–3409. doi: 10.1007/BF02595433
20.
ZhaoB., GottsteinG. and ShvindlermanL. S.: ‘Triple junction effects in solids’, Acta Mater., 2011, 59, (9), 3510–3518. doi: 10.1016/j.actamat.2011.02.024
