Sage Journals: Discover world-class research

Retricted access

Review article

First published 2006-11

High speed fusion weld bead defects

T. C. Nguyen, D. C. Weckman, D. A. Johnson [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2025-11

Measurement of the welding strength of a two-beads foam

Paolo Iaccarino, Lorenzo Miele, Alessandro Liuzzi [...]

Journal of Cellular Plastics

Free access

Research article

First published 2009-6

Suppression of weld-bead defects and increase in the critical welding speed during high-speed arc welding

C S Wu, Z K Hu, Y M Zhang

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 1996-2

Rule-Based Control of Weld Bead Width in Pulsed Gas Tungsten Arc Welding (GTAW)

C S Wu, Y C Liu

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-3

Investigation on the effects of the joint type on the driven out bead in the welded pipes produced by high-frequency induction welding

M Ghaffarpour, D Akbari, H Moslemi Naeini

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Free access

Research article

First published 2018-6

An integrated evolutionary approach for simultaneous optimization of laser weld bead characteristics

C. Govinda Rajulu, A Gopala Krishna, Thella Babu Rao

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2004-4

Adaptive control of back bead in V groove welding without backing plate

S. Yamane, H. Yamamoto, T. Ishihara [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2025

Bending mechanisms of the weld zone and coined-bead mechanisms applied for springback prevention in the tailor-welded blanks bending process

Rudeemas Jankree, Sutasn Thipprakmas

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2007-10

Predicting onset of high speed gas metal arc weld bead defects using dimensional analysis techniques

T. C. Nguyen, D. C. Weckman, D. A. Johnson

Science and Technology of Welding and Joining

Open access

Research article

First published 2025-7

Optimization of shielded metal arc welding process parameters on weld bead geometry using Jaya algorithm and Firefly algorithm

Pushp Kumar Baghel

Advances in Mechanical Engineering

Search results