Sage Journals: Discover world-class research

Free access

Case report

First published 2016-12

Three-part mould technique for fabrication of hollow thumb prosthesis: A case report

Ajay Jain, Fraser S Walker, Sridevi Ugrappa [...]

Prosthetics and Orthotics International

Retricted access

Research article

First published 2023-1

Aesthetic rehabilitation of amputated phalanx by three part mould technique using silicone elastomer – case report

Manu Rathee, S Divakar, Prachi Jain [...]

The International Journal of Artificial Organs

Retricted access

Research article

First published 2009-3

A brief history of the filling simulation of injection moulding

D Cardozo

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1998-07

3-D Technology in Blow Moulding: A Numerical Simulation

Benoît Debbaut, Thierry Marchal

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2000-7

Influence of thermomechanical conditions on structure development and mechanical properties of polyethylene mouldings produced using different moulding methods

J.S. Godinho, A. Cunha, R.J. Crawford

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 1992-11

New Developments in Low Density Structural RIM *

J.M. Schroeder, P.W. Mackey

Cellular Polymers

Retricted access

Research article

First published 2024

Performance evaluation of developing electrical discharge machining tools through 3D-printed mould using selective laser sintering and expanding its applications in developing free-form tools

Rishi Parvanda, Prateek Kala

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2000-7

Prediction of mechanical properties of polyethylene mouldings based on laminate theory and thermomechanical indices

J.S. Godinho, A. Cunha, R.J. Crawford

Plastics,Rubber and Composites: Macromolecular Engineering

Free access

Research article

First published 2007-2

Fabrication and Characterization of Microparts by Mechanical Micromachining: Precision and Cost Estimation

Hyuk-Jin Kang, Sung-Hoon Ahn

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2024-1

The effect of microstructure on the tensile and impact behaviour of short-glass fibre-reinforced polyamide 6.6 as assessed by micro-computed tomography

N. Rosic, M. Mollo, C. Bernal [...]

Proceedings of the Institution of Mechanical Engineers,Part L: Journal of Materials: Design and Applications

Search results