Sage Journals: Discover world-class research

Retricted access

Research article

First published 2010-12

Effects of processing parameters on rapid manufacturing 90W–7Ni–3Fe parts via selective laser melting

R. D. Li, J. H. Liu, Y. S. Shi [...]

Powder Metallurgy

Free access

Research article

First published 2016-2

Stability-based selection of cutting parameters to increase material removal rate in high-speed machining process

Hongrui Cao, Kai Zhou, Xuefeng Chen

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2020-2

Effect of process parameters on residual stress in selective laser melting of AlSi10Mg

Xiaohui Jiang, Tong Ye, Yihong Zhu

Materials Science and Technology

Free access

Research article

First published 2010-10

Selection of Process Parameters for Optimizing the Weld Strength in Laser Transmission Welding of Acrylics

B Acherjee, A S Kuar, S Mitra [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Open access

Research article

First published 2014

Mathematical Model for the Selection of Processing Parameters in Selective Laser Sintering of Polymer Products

Ana Pilipović, Igor Drstvenšek, Mladen Šercer

Advances in Mechanical Engineering

Retricted access

Research article

First published 2015-6

Processing AlSi10Mg by selective laser melting: Parameter optimisation and material characterisation

K. Kempen, L. Thijs, J. Van Humbeeck [...]

Materials Science and Technology

Open access

Research article

First published 2013

A Cutting Parameters Selection Method in Milling Aero-Engine Parts Based on Process Condition Matching

Yongfeng Hou, Dinghua Zhang, Ming Luo [...]

Advances in Mechanical Engineering

Free access

Research article

First published 2000-9

A hybrid approach for selection of optimal process parameters in abrasive water jet cutting

Sitarama P Chakravarthy, Ramesh N Babu

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2020-06

The Influence of Selected Selective Laser Sintering Technology Process Parameters on Stress Relaxation,Mass of Models,and Their Surface Texture Quality

Tomasz Kozior

3D Printing and Additive Manufacturing

Retricted access

Research article

First published 2023-10

Optimization of Selective Laser Sintering Process Parameters Based on PA12 Powders for Bone Tissue Scaffolds

Ran Yan, Changjiang Xie, Ze Zhao [...]

3D Printing and Additive Manufacturing

Search results