Sage Journals: Discover world-class research

Free access

Research article

First published 2012-2

Investigation of the influence of EDM parameters on the overcut for AISI D3 tool steel

O Belgassim, A Abusaada

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-1

Application of chirp pulse compression technique to a high-temperature EMAT with a large lift-off

Wenze Shi, Weiwei Chen, Chao Lu [...]

International Journal of Applied Electromagnetics and Mechanics

Retricted access

Research article

First published 2023-5

Growth of hard metal films by deep oscillation magnetron sputtering

Y.G. Li, C.L. Chen, W.Y. Liu [...]

Surface Engineering

Retricted access

Research article

First published 2009-11

Influence of CH 3 SO 3 H and AlCl 3 in direct and pulse current electrodeposition of trivalent chromium

S. Mohan, J. Vijayakumar, G. Saravanan

Surface Engineering

Retricted access

Research article

First published 2009-7

Effect of pulse parameter on pulsed electrodeposition of copper on stainless steel

A. Balasubramanian, D. S. Srikumar, G. Raja [...]

Surface Engineering

Free access

Research article

First published 2015-5

Optimization of wire electrical discharge machining process parameters on material removal rate for Al7075/SiC/Al 2 O 3 hybrid composite

Shyam Lal, Sudhir Kumar, Zahid A Khan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2021-4

Wire Electric Discharge Machining Induced Surface Integrity for Ni 55.95 Ti 44.05 Shape Memory Alloy

Himanshu Bisaria, Pragya Shandilya

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Retricted access

Research article

First published 2025

Experimental investigation on effective use of machining parameters in electric discharge machining for machining micro-holes in Ti-6Al-4V

Rex Naveen Anthuvan, Vijayan Krishnaraj, Jinyang Xu [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2013-7

Investigation of machining parameters and surface integrity in wire electric discharge machining of pure titanium

Anish Kumar, Vinod Kumar, Jatinder Kumar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2025-12

Wire EDM machining characteristics of squeeze cast Al-Zn-Mg-Cu/(SiC + Al 2 O 3 ) hybrid composite by TOPSIS approach

M Karthikraja, S Selvaraj, M Uthayakumar [...]

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Search results