Sage Journals: Discover world-class research

Retricted access

Research article

First published 2019-11

A new methodology for design and manufacturing of a customized silicone partial foot prosthesis using indirect additive manufacturing

Osama Abdelaal, Saied Darwish, Khaled Abd Elmougoud [...]

The International Journal of Artificial Organs

Retricted access

Research article

First published 2012-9

Evaluation of direct and indirect additive manufacture of maxillofacial prostheses

Dominic Eggbeer, Richard Bibb, Peter Evans [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Free access

Research article

First published 2014-4

Use of digital technologies for nasal prosthesis manufacturing

David Palousek, Jiri Rosicky, Daniel Koutny

Prosthetics and Orthotics International

Retricted access

Other

First published 2008-12

Textile Heartvalve Prosthesis: Manufacturing Process and Prototype Performances

Frédéric Heim, Bernard Durand, Nabil Chakfe

Textile Research Journal

Retricted access

Research article

First published 2011-3

Design and Manufacturing of Ear Prosthesis by Means of Rapid Prototyping Technology

F De Crescenzio, M Fantini, L Ciocca [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Free access

Research article

First published 1984-4

Potential problems of manufacture and fitting of polypropylene ultralight weight below-knee prostheses

P. Convery, D. Jones, J. Hughes [...]

Prosthetics and Orthotics International

Retricted access

Research article

First published 2018-2

Development of low-cost customised hand prostheses by additive manufacturing

Daniel Ferreira, Teresa Duarte, Jorge Lino Alves [...]

Plastics,Rubber and Composites: Macromolecular Engineering

Retricted access

Research article

First published 2000-6

An investigation of three-dimensional scanning of human body surfaces and its use in the design and manufacture of prostheses

R Bibb, P Freeman, R Brown [...]

Proceedings of the Institution of Mechanical Engineers,Part H: Journal of Engineering in Medicine

Retricted access

Case report

First published 2016-9

Mandibular Reconstruction Using a Custom-Made Titanium Prosthesis: A Case Report on the Use of Virtual Surgical Planning and Computer-Aided Design/Computer-Aided Manufacturing

Andrew Ow, Winston Tan, Lukasz Pienkowski

Craniomaxillofacial Trauma & Reconstruction

Open access

Research article

First published 2021-12

Three-Dimensional Computer-Aided Design of a Full-Color Ocular Prosthesis with Textured Iris and Sclera Manufactured in One Single Print Job

Annabel L.W. Groot, Jelmer S. Remmers, Dyonne T. Hartong

3D Printing and Additive Manufacturing

Search results