An investigation of three-dimensional scanning of human body surfaces and its use in the design and manufacture of prostheses

Abstract

The capture of highly accurate data describing the complex surfaces of the human body may prove extremely useful in many medical situations. The data provide a method of measuring and recording changes to the surface of a patient's soft tissue. The data may be applied to computer-controlled manufacturing techniques, such as rapid prototyping (RP). This enables accurate physical replicas of the patient topography to be produced. Such models may be used as an aid in the design and manufacture of prostheses.

This paper describes an investigation aimed at identifying problems that may be encountered when scanning patients and describes the application of the resulting data in the design and manufacture of facial prostheses. The results of the experiment are presented together with a discussion of the accuracy and potential advantages afforded by this approach.

Keywords

three-dimensional scanning rapid prototyping facial prostheses prosthesis manufacture

Get full access to this article

View all access options for this article.

References

Motavalli

Review of reverse engineering approaches

Computers Ind. Engng, 1998, 35 (1–2), 25–28.

Wong

H. K.

Balasubramaniam

Rajan

Chang

S. Y.

Direct spinal curvature digitization in scoliosis screening: A comparative study with moiré contourography

J. Spinal Disorders, 1997, 10 (3), 185–192.

Tricorder Technology plc. Tricorder ships new measurement software. Press Release, 8 December 1998, Tricorder Technology Limited, Harefield, Middlesex.

Bergman

J. N.

The Bergman foot scanner for automated orthotic fabrication

Clinics in Podiatry Medicine Surg. (Treatment Biomechanical Assessment Using Computers), 1993, 10 (3), 363–375.

Bao

H. P.

Soundar

Yang

Integrated approach to design and manufacture of shoe lasts for orthopaedic use: Reverse engineering in industry: Research issues and applications

Computers Ind. Engng, 1994, 26 (2), 411–421.

Branemark

De Oliveira

M. F.

(Eds) Craniofacial Prostheses, Anaplastology and Osseointegration, 1997, pp. 101–110 (Quintessence Publishing Company Inc., Carol Stream, Illinois).

Manners

C. R.

STL File Format, 1993 (3D Systems Inc., Valencia, California).

Jacobs

P. F.

Stereolithography and other RP&M Technologies, 1996 (Society of Manufacturing Engineering, Dearborn, Michigan).