Sage Journals: Discover world-class research

Free access

Research article

First published 2002-5

Recognition of pass features for automatic parting surface generation in injection moulds

K Chung, K Lee, T Kim

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 1961-3

Stress Distribution on the Boundary of a Circular Hole in a Large Plate during Passage of a Stress Pulse of Short Duration

W. F. Riley, A. J. Durelli

Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2006-4

A numerical study of the effects of swirl chamber passage hole geometry on the flow characteristics of a swirl chamber type diesel engine

Gyeung Ho Choi, Sung Hoon Kim, Tae Yun Kwon [...]

Proceedings of the Institution of Mechanical Engineers,Part D: Journal of Automobile Engineering

Open access

Research article

First published 2012

Experimental Visualization of the Flow Structure for Jet in Crossflow with a Curved Hole Passage

Jun Yu Liang, Shun Kang

Advances in Mechanical Engineering

Retricted access

Research article

First published 2011-11

Influence of internal parallel and v-shaped ribs on the discharge coefficient of a cylindrical film cooling hole

C Heneka, A Schulz, H-J Bauer

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Free access

Research article

First published 2003-9

Drilling and deburring in a single process

K H Kim, C H Cho, S Y Jeon [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2022-3

Numerical investigation of blowing ratio,density ratio and axial position of film holes on the vane endwall film cooling effectiveness with upstream step

Qingzong Xu, Qiang Du, Pei Wang [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Free access

Research article

First published 2015-8

Effects of the cutting fluid reduction on the dimensional quality of holes

Rodrigo P Zeilmann, Tiago Vacaro, Fernando M Bordin [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2017-6

A new approach for pre-stressing of rail-end-bolt holes

JT Maximov, GV Duncheva, IM Amudjev [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2014-5

An inverse method of designing the cooling passages of turbine blades based on the heat adjoint equation

Michele Ferlauto

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Search results