Sage Journals: Discover world-class research

Retricted access

Research article

First published 2015-6

In situ characterization of in-plane chemical shrinkage of thermoset laminated composites using a simple setup

Yasir Nawab, Pascal Casari, Nicolas Boyard [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2015-4

In situ characterization of direction-dependent cure-induced shrinkage in thermoset composite laminates with fiber-optic sensors embedded in through-thickness and in-plane directions

Shu Minakuchi

Journal of Composite Materials

Retricted access

Research article

First published 2022-11

Use of a digital image correlation method for full-field shrinkage measurement in injection molding

Antoine Dupuis, Jean-Jacques Pesce, Jean-Baptiste Marijon [...]

The Journal of Strain Analysis for Engineering Design

Free access

Research article

First published 2006-2

Study on Shrinkage Behaviour of Direct Laser Sintering Metallic Powder

H H Zhu, L Lu, J Y H Fuh

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2026

Research on shrinkage defects of an 18-ton steel ingot with a large height-to-diameter ratio prepared under vacuum conditions

Zhan-yang Yu, Rui-shan Xin, Chen-xing Cao [...]

Ironmaking & Steelmaking: Processes,Products and Applications

Free access

Research article

First published 1998-10

Evaluation of a Motor Deficit after Chronic Focal Cerebral Ischemia in Rats

Fumihiko Yonemori, Tohru Yamaguchi, Hideki Yamada [...]

Journal of Cerebral Blood Flow & Metabolism

Retricted access

Research article

First published 2024-8

Anisotropy in AISI 316L produced by Binder Jetting 3D printing: Sintering shrinkage and thermal conductivity

Lorena Emanuelli, Nicole Sartori, Haroon Mahmood [...]

Powder Metallurgy

Retricted access

Research article

First published 2000-06

Predicting Shrinkage in Polyester Reinforced by Glass Fabrics

T. Vu-Khanh, V. Do-Thanh

Journal of Composite Materials

Free access

Other

First published

The Influence of Pigments on the Dimensional Stability of Moulded Platest † † This paper was first presented at Addcon '98,held on 9th-10th November 1998 in London

P.E. Tomlins, J. Banyard, B. Butler [...]

Polymers and Polymer Composites

Retricted access

Research article

First published 1977-4

Dependence of Mechanical Properties on Crystalline,Intermediate,and Amorphous Phases in Poly(Ethylene Terephthalate) Fibers

B. L. Deopura, T. B. Sinha, D. S. Varma

Textile Research Journal

Search results