Sage Journals: Discover world-class research

Open access

Research article

First published 2016-4

A novel nanoscratch device compatible with commercial microscope for in situ tests of materials’ mechanics

Ning Li, Hongwei Zhao, Peng Zhang [...]

Advances in Mechanical Engineering

Retricted access

Research article

First published 2007-5

Fracture mechanism of full lamellar TiAl under high-temperature creep and fatigue conditions based on the in situ observational tests

A. Toshimitsu Yokobori, M. Yoshida, M. Shibata [...]

Strength,Fracture and Complexity

Retricted access

Research article

First published 1988-5

Toward In Situ Testing of the Mechanical Properties of Composite Panels

James F. Doyle

Journal of Composite Materials

Retricted access

Research article

First published 2020-10

A comparison of mechanical properties and X-ray tomography analysis of different out-of-autoclave manufactured thermoplastic composites

Diego Saenz-Castillo, María I Martín, Vanessa García-Martínez [...]

Journal of Reinforced Plastics and Composites

Retricted access

Research article

First published 2020-9

In situ characterization of the morphological wrinkling of woven fibrous materials by a mechanical test

Xiaorui Hu, Fengxin Sun, Qicai Wang [...]

Textile Research Journal

Retricted access

Review article

First published 2022-1

Characterisation of the opening behavior of multilayer films with cohesive failure mechanism by in situ peel tests in the ESEM

M Heuser, A Zankel, C Mayrhofer [...]

Journal of Plastic Film & Sheeting

Retricted access

Research article

First published 2020-4

Microstructural characterization and experimental investigations into two body abrasive wear behavior of Al-7079/TiC in-situ metal matrix composites

SV Sujith, Manas M Mahapatra, Rahul S Mulik

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2024-1

About the influence of high temperature or fire testing conditions on the tensile behavior of carbon reinforced poly phenylene sulfide laminates

Benoit Vieille, David Philippe, Nathan Duprey [...]

Journal of Composite Materials

Open access

Research article

First published 2024-6

Characteristics of in-situ automated fiber placement carbon-fiber-reinforced low-melt polyaryl ether ketone laminates part 2: Effect of prepreg composition

Lukas Raps, Ashley R Chadwick, Ines Mössinger [...]

Journal of Composite Materials

Retricted access

Review article

First published 2020-11

Wood-polymer composites produced by in situ polymerization of styrene into juvenile and mature pine woods

Andrey Pereira Acosta, Ezequiel Gallio, Henrique Romer Schulz [...]

International Wood Products Journal

Search results