Sage Journals: Discover world-class research

Retricted access

Review article

First published 1995-11

A Note on Tip Relief and Backlash Allowances in Non-Metallic Gears

D Walton, A A Tessema, C J Hooke [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Review article

First published 1994-3

Load Sharing in Metallic and Non-Metallic Gears

D Walton, A A Tessema, C J Hooke [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2013-4

Geometry design,three-dimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive

Chao Lin, Hai Gong, Ning Nie [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2016-5

A comparative analysis of power density for single-stage and dual-stage magnetic gear with rare-earth magnets and non rare-earth magnets

Chan-Ho Kim, Sang-Yong Jung, Yong-Jae Kim

International Journal of Applied Electromagnetics and Mechanics

Retricted access

Research article

First published 2002-2

The efficiency and friction of plastic cylindrical gears Part 2: Influence of tooth geometry

D Walton, A. B. Cropper, D. J. Weale [...]

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2008-7

The Dynamics of Capital Structure

Isaya J Jairo

Asia-Pacific Journal of Management Research and Innovation

Retricted access

Research article

First published 2020-4

Comparison on torsional mesh stiffness and contact ratio of involute internal gear and high contact ratio internal gear

Yanzhong Wang, Delong Dou, E Shiyuan [...]

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2011-10

The influence of manufacturing method on the running-in of gears

S Sjöberg, S Björklund, U Olofsson

Proceedings of the Institution of Mechanical Engineers,Part J: Journal of Engineering Tribology

Retricted access

Research article

First published 2025-4

Nonlinear performance of aerospace face gear-planetary gear transmission system under multi-factors including the effect of temperature

Xincheng Bi, Jungang Wang, Xiang Chen [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Open access

Research article

First published 2013

Optimum Design of 1st Gear Ratio for 4WD Vehicles Based on Vehicle Dynamic Behaviour

M. H. Shojaeefard, R. Talebitooti, Sadegh Yarmohammadi Satri

Advances in Mechanical Engineering

Search results