Sage Journals: Discover world-class research

Open access

Research article

First published 2026

Adjoint-based optimal design of adaptive negative stiffness devices for inelastic frame structures

A. Shmerling

Journal of Vibration and Control

Retricted access

Research article

First published 2012-10

Non-uniform rational B-splines-based aerodynamic shape design optimization with the DLR TAU code

M J Martín, E Andrés, M Widhalm [...]

Proceedings of the Institution of Mechanical Engineers,Part G: Journal of Aerospace Engineering

Retricted access

Research article

First published 2018-11

A continuous adjoint-based aeroacoustic shape optimization for multi-mode duct acoustics

Sheng Qiu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2014-1

Shape optimization of a general bypass duct for tone noise reduction using continuous adjoint method

S Qiu, WB Song, H Liu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2014-5

An inverse method of designing the cooling passages of turbine blades based on the heat adjoint equation

Michele Ferlauto

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Open access

Research article

First published 2022-9

Thermoacoustic stabilization of combustors with gradient-augmented Bayesian optimization and adjoint models

Ushnish Sengupta, Matthew P. Juniper

International Journal of Spray and Combustion Dynamics

Retricted access

Research article

First published 2007-1

Total pressure loss minimization in turbomachinery cascades using a new continuous adjoint formulation

D. I. Papadimitriou, K. C. Giannakoglou

Proceedings of the Institution of Mechanical Engineers,Part A: Journal of Power and Energy

Retricted access

Research article

First published 2021-1

Design of a low noise turbofan duct via an acoustic gradient-enhanced Kriging method

S Qiu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Review article

First published 1993-5

Shape Sensitivity Formulation for Axisymmetric Thermal Conducting Solids

Boo Youn Lee

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 1996-9

Three-Dimensional shape optimization approach based on natural design variables and the boundary element method

P Kočandrle, P Koška

The Journal of Strain Analysis for Engineering Design

Search results