Search results: Sage Journals

Restricted accessResearch articleFirst published July, 2011

Topographic analysis and Weibull regression for prediction of strain localisation in an automotive aluminium alloy

J B Hubbard, M R Stoudt, A M Possolo

Materials Science and Technology

Restricted accessResearch articleFirst published March, 2006

Deformation texture and microtexture developments in a cold rolled single phase hexagonal Zircaloy 2

M. Kiran Kumar, C. Vanitha, I. Samajdar [...]

Materials Science and Technology

Restricted accessResearch articleFirst published January, 1995

Localised strain characterisation in semiconductor structures using electron diffraction contrast imaging

K. G. F. Janssens, O. Van der Biest, J. Vanheliemont [...]

Materials Science and Technology

Restricted accessResearch articleFirst published 2026

Development of novel tailored blanks through modified CGP die design followed by strain and formability analysis

Abhishek Kharwar, Sunil Kumar, Sudarshan Kumar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Restricted accessResearch articleFirst published September, 2016

Localisation of deformation in cold gas dynamic spraying

O. Bielousova, J. Kocimski, R. Gr. Maev [...]

Surface Engineering

Restricted accessResearch articleFirst published January, 2017

Influence of magnesium AZ80 friction stir weld texture on tensile strain localisation

J. Hiscocks, B. J. Diak, A. P. Gerlich [...]

Materials Science and Technology

Open accessResearch articleFirst published February, 2022

Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques

Hassan Gonabadi, Adrian Oila, Arti Yadav [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published August, 2019

Comparison of anti-plane surface waves in strain-gradient materials and materials with surface stresses *

Victor A Eremeyev, Giuseppe Rosi, Salah Naili

Mathematics and Mechanics of Solids

Open accessResearch articleFirst published September, 2022

A CDM-based unified viscoplastic constitutive model of FLCs and FFLCs for boron steel under hot stamping conditions

Ruiqiang Zhang, Zhusheng Shi, Victoria A Yardley [...]

International Journal of Damage Mechanics

Restricted accessResearch articleFirst published April, 1996

Strain evaluation model of adiabatic shear band produced by orthogonal cutting in high strength low alloy steel

Q. Li, C. Ma, Z. Lai

Materials Science and Technology

Restricted accessResearch articleFirst published July, 2011

Topographic analysis and Weibull regression for prediction of strain localisation in an automotive aluminium alloy

J B Hubbard, M R Stoudt, A M Possolo

Materials Science and Technology

Restricted accessResearch articleFirst published March, 2006

Deformation texture and microtexture developments in a cold rolled single phase hexagonal Zircaloy 2

M. Kiran Kumar, C. Vanitha, I. Samajdar [...]

Materials Science and Technology

Restricted accessResearch articleFirst published January, 1995

Localised strain characterisation in semiconductor structures using electron diffraction contrast imaging

K. G. F. Janssens, O. Van der Biest, J. Vanheliemont [...]

Materials Science and Technology

Restricted accessResearch articleFirst published 2026

Development of novel tailored blanks through modified CGP die design followed by strain and formability analysis

Abhishek Kharwar, Sunil Kumar, Sudarshan Kumar

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Restricted accessResearch articleFirst published September, 2016

Localisation of deformation in cold gas dynamic spraying

O. Bielousova, J. Kocimski, R. Gr. Maev [...]

Surface Engineering

Restricted accessResearch articleFirst published January, 2017

Influence of magnesium AZ80 friction stir weld texture on tensile strain localisation

J. Hiscocks, B. J. Diak, A. P. Gerlich [...]

Materials Science and Technology

Open accessResearch articleFirst published February, 2022

Investigation of anisotropy effects in glass fibre reinforced polymer composites on tensile and shear properties using full field strain measurement and finite element multi-scale techniques

Hassan Gonabadi, Adrian Oila, Arti Yadav [...]

Journal of Composite Materials

Restricted accessResearch articleFirst published August, 2019

Comparison of anti-plane surface waves in strain-gradient materials and materials with surface stresses *

Victor A Eremeyev, Giuseppe Rosi, Salah Naili

Mathematics and Mechanics of Solids

Open accessResearch articleFirst published September, 2022

A CDM-based unified viscoplastic constitutive model of FLCs and FFLCs for boron steel under hot stamping conditions

Ruiqiang Zhang, Zhusheng Shi, Victoria A Yardley [...]

International Journal of Damage Mechanics

Restricted accessResearch articleFirst published April, 1996

Strain evaluation model of adiabatic shear band produced by orthogonal cutting in high strength low alloy steel

Q. Li, C. Ma, Z. Lai

Materials Science and Technology