Sage Journals: Discover world-class research

Retricted access

Research article

First published 2014-2

Filling friction stir weld keyhole using pin free tool and T shaped filler bit

G. F. Zhang, W. M. Jiao, J. X. Zhang

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2021-11

Material flow and mechanical properties of friction stir welded Al-Mg-Si alloy: Role of concentric circles shoulder with non-circular pins

Krishna Kishore Mugada, Kumar Adepu

Proceedings of the Institution of Mechanical Engineers,Part C: Journal of Mechanical Engineering Science

Retricted access

Research article

First published 2022-6

Experimental investigation and optimization of mechanical properties on combination of higher and lower strength of aluminum alloys

C Ganesan, K Manonmani

Proceedings of the Institution of Mechanical Engineers,Part E: Journal of Process Mechanical Engineering

Free access

Research article

First published 2014-9

Friction stir welding window for AA6061-T6 aluminium alloy

Vijay S Gadakh, Adepu Kumar

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2010-10

Metallurgical analysis of Al/Cu friction stir spot welding

R. Heideman, C. Johnson, S. Kou

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2015-5

Effect of tool pin features on process response variables during friction stir welding of dissimilar aluminum alloys

Md. Reza-E-Rabby, W. Tang, A. P. Reynolds

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2026-3

Geometrical parameters effect of friction stir welding tool on void formation in AA 6061-T6 T-Joint configuration

Kareem N. Salloomi, Hussain A. Mahdi, Sanaa Al-Sumaidae [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2014-10

Approach to disrupting thick intermetallic compound interfacial layer in friction stir brazing (FSB) of Al/Cu plates

G. F. Zhang, K. Zhang, L. J. Zhang [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2006-7

CFD modelling of friction stir welding of thick plate 7449 aluminium alloy

P. A. Colegrove, H. R. Shercliff

Science and Technology of Welding and Joining

Open access

Research article

First published 2022-9

Response surface,neural network,and experimental approach to optimize process parameters and characterization of Al-Mg alloy by friction stir welding

Chandra Shekar Anjinappa, Sagr Alamri, Asif Afzal [...]

Advances in Mechanical Engineering

Search results