Sage Journals: Discover world-class research

Free access

Research article

First published 2007-3

Modelling the effects of constraints and single axis welding process parameters on angular distortions in one-sided fillet welds

M M Mahapatra, G L Datta, B Pradhan [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Free access

Research article

First published 2006-6

Three-Dimensional Finite Element Analysis to Predict the Effects of Shielded Metal Arc Welding Process Parameters on Temperature Distributions and Weldment Zones in Butt and One-Sided Fillet Welds

M M Mahapatra, G L Datta, B Pradhan

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2006-9

Sensing and seam tracking of welding line in backingless V groove welding

S. Yamane, H. Yamamoto, Y. Kaneko [...]

Science and Technology of Welding and Joining

Free access

Research article

First published 2016-5

Development of double-side friction stir welding to improve post-welding formability of joints in AA6082 aluminium alloy

Michela Simoncini, Marcello Cabibbo, Archimede Forcellese

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2012-5

Non-destructive detection of lack of penetration defects in friction stir welds

C Mandache, D Levesque, L Dubourg [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2010-1

Friction stir weld nugget temperature asymmetry

M. Wade, A. P. Reynolds

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2018-4

Fatigue behaviour of dissimilar friction stir welds between wrought and cast aluminium alloys

Yoshihiko Uematsu, Toshifumi Kakiuchi, Yoshiki Mizutani [...]

Science and Technology of Welding and Joining

Free access

Research article

First published 2017-1

Theoretical and experimental investigation of deep drawing of tailor-welded IF steel blanks with non-uniform blank holder forces

Mohammad Hossein Asadian-Ardakani, Mohammad Reza Morovvati, Mohammad Javad Mirnia [...]

Proceedings of the Institution of Mechanical Engineers,Part B: Journal of Engineering Manufacture

Retricted access

Research article

First published 2012-7

Comparative study of fatigue behaviour in dissimilar Al alloy/steel and Mg alloy/steel friction stir spot welds fabricated by scroll grooved tool without probe

Y Uematsu, T Kakiuchi, Y Tozaki [...]

Science and Technology of Welding and Joining

Retricted access

Research article

First published 2013-7

Friction stir welding of thin DH36 steel plate

N A McPherson, A M Galloway, S R Cater [...]

Science and Technology of Welding and Joining

Search results